This is resend number 6 since the last change to this series.
This cleanup was requested by Greg KH back in June of 2017. I've resent the series
a couple times a cycle since then, updating and fixing as feedback was slowly
recieved some patches were alread accepted by specific arches. In June 2018,
Andrew picked the remainder of this up and it was in linux-next for a
couple weeks. There were a couple problems that were identified and addressed
back then and I'd really like to get the ball rolling again. A year
and a half of sending this without much feedback is far too long.
@Andrew, can you please pick this set up again so it can get into
linux-next? Or let me know if there's something else I should be doing.
Thanks,
Logan
--
Changes since v24:
- Rebased onto v5.0-rc2 (No Changes)
Changes since v23:
- Rebased onto v4.20-rc4 (No Changes)
Changes since v22:
- Rebased onto v4.20-rc1 (No Changes)
Changes since v21:
- Rebased onto v4.19-rc6 (No Changes)
Changes since v20:
- Rebased onto v4.19-rc3 (No Changes)
Changes since v19:
- Rebased onto v4.19-rc1 (No Changes)
Changes since v18:
- Dropped the CAAM patch as it was subtly wrong and broke when people
tested it in linux-next. Seeing the code is much trickier than it
appears, we'll leave it to its maintainers to clean it up,
should they chose.
- Restored the ioread64/iowrite64 extern prototypes as despite
appearing to be unusued, they are in fact used in a rare corner case
by the caam driver on 64bit powerpc. This was reported by Guenter testing
on linux-next.
- Rebased onto v4.18-rc4 (No Changes)
Changes since v17:
- Rebased onto v4.18-rc1 (No Changes)
Changes since v16:
- Rebased onto v4.17-rc4 (No Changes)
Changes since v15:
- Rebased onto v4.17-rc1, dropping the powerpc patches which were
picked up by Michael
Changes since v14:
- Rebased onto v4.16-rc7
- Replace the first two patches so that instead of correcting the
endianness annotations we change to using writeX() and readX() with
swabX() calls. This makes the big-endian functions more symmetric
with the little-endian versions (with respect to barriers that are
not included in the raw functions). As a side effect, it also fixes
the kbuild warnings that the first two patches tried to address.
Changes since v13:
- Changed the subject of patch 0001 to correct a nit pointed out by Luc
Changes since v12:
- Rebased onto v4.16-rc6
- Split patch 0001 into two and reworked the commit log as requested
by Luc Van Oostenryck
Changes since v11:
- Rebased onto v4.16-rc5
- Added a patch (0001) to fix some old and new sparse warnings
that the kbuild robot warned about this cycle. The latest version
of sparse was required to reproduce these.
- Added a patch (0002) to add io{read|write}64 to parisc which the kbuild
robot also found errors for this cycle
Changes since v10:
- Rebased onto v4.16-rc4, this droped the drm/tilcdc patch which was
picked up by that tree and is already in 4.16.
Changes since v9:
- Rebased onto v4.15-rc6
- Fixed a couple of issues in the new version of the CAAM patch as
pointed out by Horia
Changes since v8:
- Rebased onto v4.15-rc2, as a result rewrote patch 7 seeing someone did
some similar cleanup in that area.
- Added a patch to clean up the Switchtec NTB driver which landed in
v4.15-rc1
Changes since v7:
- Fix minor nits from Andy Shevchenko
- Rebased onto v4.14-rc1
Changes since v6:
** none **
Changes since v5:
- Added a fix to the tilcdc driver to ensure it doesn't use the
non-atomic operation. (This includes adding io{read|write}64[be]_is_nonatomic
defines).
Changes since v4:
- Add functions so the powerpc implementation of iomap.c compiles. (As
noticed by Horia)
Changes since v3:
- I noticed powerpc didn't use the appropriate functions seeing
readq/writeq were not defined when iomap.h was included. Thus I've
included a patch to adjust this
- Fixed some mistakes with a couple of the defines in io-64-nonatomic*
headers
- Fixed a typo noticed by Horia.
(earlier versions were drastically different)
--
Logan Gunthorpe (6):
iomap: Use non-raw io functions for io{read|write}XXbe
parisc: iomap: introduce io{read|write}64
iomap: introduce io{read|write}64_{lo_hi|hi_lo}
io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common
header
arch/parisc/include/asm/io.h | 9 ++
arch/parisc/lib/iomap.c | 64 +++++++++++
arch/powerpc/include/asm/io.h | 2 +
drivers/ntb/hw/intel/ntb_hw_intel.h | 30 +-----
drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 36 +------
include/asm-generic/iomap.h | 22 ++++
include/linux/io-64-nonatomic-hi-lo.h | 64 +++++++++++
include/linux/io-64-nonatomic-lo-hi.h | 64 +++++++++++
lib/iomap.c | 140 ++++++++++++++++++++++++-
9 files changed, 366 insertions(+), 65 deletions(-)
--
2.19.0
