Next step: 64ecd2c160bbef31465c4d34efc0f076a2aad4df (powerpc/dma: use
phys_to_dma instead of get_dma_offset)
The P5020 board boots and the PASEMI onboard ethernet works.
-- Christian
On 09 December 2018 at 7:26PM, Christian Zigotzky wrote:
Next step: c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a (dma-mapping,
powerpc: simplify the arch dma_set_mask override)
Result: No problems with the PASEMI onboard ethernet and with booting
the X5000 (P5020 board).
-- Christian
On 09 December 2018 at 3:20PM, Christian Zigotzky wrote:
Next step: 602307b034734ce77a05da4b99333a2eaf6b6482 (powerpc/fsl_pci:
simplify fsl_pci_dma_set_mask)
git checkout 602307b034734ce77a05da4b99333a2eaf6b6482
The PASEMI onboard ethernet works and the X5000 boots.
-- Christian
On 08 December 2018 at 2:47PM, Christian Zigotzky wrote:
Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma:
fix an off-by-one in dma_capable)
git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615
The PASEMI onboard ethernet also works with this commit and the
X5000 boots without any problems.
-- Christian
On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma:
remove max_direct_dma_addr)
git checkout 7ebc44c535f6bd726d553756d38b137acc718443
OK, the PASEMI onboard ethernet works and the P5020 board boots.
-- Christian
On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma:
move pci_dma_dev_setup_swiotlb to fsl_pci.c)
git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
Result: The PASEMI onboard ethernet works and the P5020 board boots.
— Christian
