The one obvious thing SH and ARM want is a sensible default for tlb_start_vma(). (also: https://lkml.org/lkml/2004/1/15/6 ) Avoid all VIPT architectures providing their own tlb_start_vma() implementation and rely on architectures to provide a no-op flush_cache_range() when it is not relevant. The below makes tlb_start_vma() default to flush_cache_range(), which should be right and sufficient. The only exceptions that I found where (oddly): - m68k-mmu - sparc64 - unicore Those architectures appear to have flush_cache_range(), but their current tlb_start_vma() does not call it. Cc: Will Deacon <will.deacon@xxxxxxx> Cc: "Aneesh Kumar K.V" <aneesh.kumar@xxxxxxxxxxxxxxxxxx> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> Cc: Nick Piggin <npiggin@xxxxxxxxx> Cc: David Miller <davem@xxxxxxxxxxxxx> Cc: Guan Xuetao <gxt@xxxxxxxxxx> Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx> --- arch/arc/include/asm/tlb.h | 9 --------- arch/mips/include/asm/tlb.h | 9 --------- arch/nds32/include/asm/tlb.h | 6 ------ arch/nios2/include/asm/tlb.h | 10 ---------- arch/parisc/include/asm/tlb.h | 5 ----- arch/sparc/include/asm/tlb_32.h | 5 ----- arch/xtensa/include/asm/tlb.h | 9 --------- include/asm-generic/tlb.h | 19 +++++++++++-------- 8 files changed, 11 insertions(+), 61 deletions(-) --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -23,15 +23,6 @@ do { \ * * Note, read http://lkml.org/lkml/2004/1/15/6 */ -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING -#define tlb_start_vma(tlb, vma) -#else -#define tlb_start_vma(tlb, vma) \ -do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ -} while(0) -#endif #define tlb_end_vma(tlb, vma) \ do { \ --- a/arch/mips/include/asm/tlb.h +++ b/arch/mips/include/asm/tlb.h @@ -5,15 +5,6 @@ #include <asm/cpu-features.h> #include <asm/mipsregs.h> -/* - * MIPS doesn't need any special per-pte or per-vma handling, except - * we need to flush cache for area to be unmapped. - */ -#define tlb_start_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while (0) #define tlb_end_vma(tlb, vma) do { } while (0) #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) --- a/arch/nds32/include/asm/tlb.h +++ b/arch/nds32/include/asm/tlb.h @@ -4,12 +4,6 @@ #ifndef __ASMNDS32_TLB_H #define __ASMNDS32_TLB_H -#define tlb_start_vma(tlb,vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while (0) - #define tlb_end_vma(tlb,vma) \ do { \ if(!tlb->fullmm) \ --- a/arch/nios2/include/asm/tlb.h +++ b/arch/nios2/include/asm/tlb.h @@ -15,16 +15,6 @@ extern void set_mmu_pid(unsigned long pid); -/* - * NiosII doesn't need any special per-pte or per-vma handling, except - * we need to flush cache for the area to be unmapped. - */ -#define tlb_start_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while (0) - #define tlb_end_vma(tlb, vma) do { } while (0) #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) --- a/arch/parisc/include/asm/tlb.h +++ b/arch/parisc/include/asm/tlb.h @@ -7,11 +7,6 @@ do { if ((tlb)->fullmm) \ flush_tlb_mm((tlb)->mm);\ } while (0) -#define tlb_start_vma(tlb, vma) \ -do { if (!(tlb)->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ -} while (0) - #define tlb_end_vma(tlb, vma) \ do { if (!(tlb)->fullmm) \ flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ --- a/arch/sparc/include/asm/tlb_32.h +++ b/arch/sparc/include/asm/tlb_32.h @@ -2,11 +2,6 @@ #ifndef _SPARC_TLB_H #define _SPARC_TLB_H -#define tlb_start_vma(tlb, vma) \ -do { \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ -} while (0) - #define tlb_end_vma(tlb, vma) \ do { \ flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ --- a/arch/xtensa/include/asm/tlb.h +++ b/arch/xtensa/include/asm/tlb.h @@ -16,19 +16,10 @@ #if (DCACHE_WAY_SIZE <= PAGE_SIZE) -/* Note, read http://lkml.org/lkml/2004/1/15/6 */ - -# define tlb_start_vma(tlb,vma) do { } while (0) # define tlb_end_vma(tlb,vma) do { } while (0) #else -# define tlb_start_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while(0) - # define tlb_end_vma(tlb, vma) \ do { \ if (!tlb->fullmm) \ --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -19,6 +19,7 @@ #include <linux/swap.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> +#include <asm/cacheflush.h> #ifdef CONFIG_MMU @@ -351,17 +352,19 @@ static inline unsigned long tlb_get_unma * the vmas are adjusted to only cover the region to be torn down. */ #ifndef tlb_start_vma -#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_start_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) #endif -#define __tlb_end_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - tlb_flush_mmu_tlbonly(tlb); \ - } while (0) - #ifndef tlb_end_vma -#define tlb_end_vma __tlb_end_vma +#define tlb_end_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + tlb_flush_mmu_tlbonly(tlb); \ +} while (0) #endif #ifndef __tlb_remove_tlb_entry
