On Wed, 29 Aug 2018 13:28:27 +1000
Nicholas Piggin <npiggin@xxxxxxxxx> wrote:
> On Tue, 28 Aug 2018 14:06:32 +1000
> Nicholas Piggin <nicholas.piggin@xxxxxxxxx> wrote:
>
> > On Mon, 27 Aug 2018 19:11:01 +0200
> > Andreas Schwab <schwab@xxxxxxxxxxxxxx> wrote:
> >
> > > I'm getting this Oops when running iptables -F OUTPUT:
> > >
> > > [ 91.139409] Unable to handle kernel paging request for data at address 0xd0000001fff12f34
> > > [ 91.139414] Faulting instruction address: 0xd0000000016a5718
> > > [ 91.139419] Oops: Kernel access of bad area, sig: 11 [#1]
> > > [ 91.139426] BE SMP NR_CPUS=2 PowerMac
> > > [ 91.139434] Modules linked in: iptable_filter ip_tables x_tables bpfilter nfsd auth_rpcgss lockd grace nfs_acl sunrpc tun af_packet snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa snd_aoa_i2sbus snd_aoa_soundbus snd_pcm_oss snd_pcm snd_seq snd_timer snd_seq_device snd_mixer_oss snd sungem sr_mod firewire_ohci cdrom sungem_phy soundcore firewire_core pata_macio crc_itu_t sg hid_generic usbhid linear md_mod ohci_pci ohci_hcd ehci_pci ehci_hcd usbcore usb_common dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_mod sata_svw
> > > [ 91.139522] CPU: 1 PID: 3620 Comm: iptables Not tainted 4.19.0-rc1 #1
> > > [ 91.139526] NIP: d0000000016a5718 LR: d0000000016a569c CTR: c0000000006f560c
> > > [ 91.139531] REGS: c0000001fa577670 TRAP: 0300 Not tainted (4.19.0-rc1)
> > > [ 91.139534] MSR: 900000000200b032 <SF,HV,VEC,EE,FP,ME,IR,DR,RI> CR: 84002484 XER: 20000000
> > > [ 91.139553] DAR: d0000001fff12f34 DSISR: 40000000 IRQMASK: 0
> > > GPR00: d0000000016a569c c0000001fa5778f0 d0000000016b0400 0000000000000000
> > > GPR04: 0000000000000002 0000000000000000 80000001fa46418e c0000001fa0d05c8
> > > GPR08: d0000000016b0400 d00037fffff13000 00000001ff3e7000 d0000000016a6fb8
> > > GPR12: c0000000006f560c c00000000ffff780 0000000000000000 0000000000000000
> > > GPR16: 0000000011635010 00003fffa1b7aa68 0000000000000000 0000000000000000
> > > GPR20: 0000000000000003 0000000010013918 00000000116350c0 c000000000b88990
> > > GPR24: c000000000b88ba4 0000000000000000 d0000001fff12f34 0000000000000000
> > > GPR28: d0000000016b8000 c0000001fa20f400 c0000001fa20f440 0000000000000000
> > > [ 91.139627] NIP [d0000000016a5718] .alloc_counters.isra.10+0xbc/0x140 [ip_tables]
> > > [ 91.139634] LR [d0000000016a569c] .alloc_counters.isra.10+0x40/0x140 [ip_tables]
> > > [ 91.139638] Call Trace:
> > > [ 91.139645] [c0000001fa5778f0] [d0000000016a569c] .alloc_counters.isra.10+0x40/0x140 [ip_tables] (unreliable)
> > > [ 91.139655] [c0000001fa5779b0] [d0000000016a5b54] .do_ipt_get_ctl+0x110/0x2ec [ip_tables]
> > > [ 91.139666] [c0000001fa577aa0] [c0000000006233e0] .nf_getsockopt+0x68/0x88
> > > [ 91.139674] [c0000001fa577b40] [c000000000631608] .ip_getsockopt+0xbc/0x128
> > > [ 91.139682] [c0000001fa577bf0] [c00000000065adf4] .raw_getsockopt+0x18/0x5c
> > > [ 91.139690] [c0000001fa577c60] [c0000000005b5f60] .sock_common_getsockopt+0x2c/0x40
> > > [ 91.139697] [c0000001fa577cd0] [c0000000005b3394] .__sys_getsockopt+0xa4/0xd0
> > > [ 91.139704] [c0000001fa577d80] [c0000000005b5ab0] .__se_sys_socketcall+0x238/0x2b4
> > > [ 91.139712] [c0000001fa577e30] [c00000000000a31c] system_call+0x5c/0x70
> > > [ 91.139716] Instruction dump:
> > > [ 91.139721] 39290040 7d3d4a14 7fbe4840 409cff98 81380000 2b890001 419d000c 393e0060
> > > [ 91.139736] 48000010 7d57c82a e93e0060 7d295214 <815a0000> 794807e1 41e20010 7c210b78
> > > [ 91.139752] ---[ end trace f5d1d5431651845d ]---
> >
> > This is due to 7290d58095 ("module: use relative references for
> > __ksymtab entries"). This part of kernel/module.c -
> >
> > /* Divert to percpu allocation if a percpu var. */
> > if (sym[i].st_shndx == info->index.pcpu)
> > secbase = (unsigned long)mod_percpu(mod);
> > else
> > secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
> > sym[i].st_value += secbase;
> >
> > Causes the distance to the target to exceed 32-bits on powerpc, so
> > it doesn't fit in a rel32 reloc. Not sure how other archs cope.
>
> Any progress on this one? I had a bit of a look but can't see a really
> trivial fix and don't have a lot of time to work on it. Maybe use 64
> bit relative offsets for per-cpu exports, or better might be apply the
> per-cpu fixup when linking against the symbol rather than when writing
> the module symbol table.
>
> Until then I'd like to just remove HAVE_ARCH_PREL32_RELOCATIONS from
> powerpc/Kconfig, but if other archs are going to have issues too, we
> could just revert
>
> 271ca788774aa ("arch: enable relative relocations for arm64, power and x86")
>
> arm64, x86 -- can the distance between your module percpu data link
> location -> module percpu runtime allocation location exceed 31 bits?
[Sorry ignore this, I missed some mail, will reply in the thread]
Thanks,
Nick
