Re: [PATCH v3 16/17] driver/edac: enable Hygon support to AMD64 EDAC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018/8/12 3:56, Michael Jin wrote:
On Sat, Aug 11, 2018 at 9:30 AM, Pu Wen <puwen@xxxxxxxx> wrote:
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 18aeabb..fb81354 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)

         scrubval = scrubrates[i].scrubval;

-       if (pvt->fam == 0x17) {
+       if (pvt->fam == 0x17 || pvt->vendor == X86_VENDOR_HYGON) {
                 __f17h_set_scrubval(pvt, scrubval);

Separating the vendor check as an "else if (pvt->vendor ==
X86_VENDOR_HYGON)" block would make architectural changes (future
hygon models, i.e. 19h, 20h, etc) less confusing.

Your suggestion is reasonable, but that might make the branch a little
complicated.If we explicitly testing Hygon family in condition case,
will that be ok?
+    if (pvt->fam == 0x17 ||
+       (pvt->vendor == X86_VENDOR_HYGON && pvt->fam == 0x18))


+                       amd64_read_pci_cfg(pvt->F6,
+                               F17H_SCR_BASE_ADDR, &scrubval);
+                       if (scrubval & BIT(0)) {
+                               amd64_read_pci_cfg(pvt->F6,

The new lines after "amd64_read_pci_cfg(pvt->F6," can be removed.

To fix the warning "line over 80 characters" reported by running the
checking script checkpatch.pl, I added the new line.
But your sugesstion is reasonable, remove the new line will make the
codes much easier to read.

@@ -1051,6 +1065,16 @@ static void determine_memory_type(struct amd64_pvt *pvt)
                 else
                         pvt->dram_type = MEM_DDR4;
                 return;
+       case 0x18:
+               if (pvt->vendor == X86_VENDOR_HYGON) {

This vendor checking is not necessary as there are no other known
family 18h processors.


         switch (pvt->fam) {
@@ -3192,6 +3227,13 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
                 pvt->ops        = &family_types[F17_CPUS].ops;
                 break;

+       case 0x18:
+               if (pvt->vendor == X86_VENDOR_HYGON) {
+                       fam_type        = &family_types[HYGON_F18_CPUS];
+                       pvt->ops        = &family_types[HYGON_F18_CPUS].ops;
+                       break;
+               }

There is a missing second 'break' statement after the "if (pvt->vendor
== X86_VENDOR_HYGON)" block for case 0x18, see case 0x15 and case 0x16
for comparison.

The missed second 'break' is on purpose. Thinking that if BIOS report
a vendor AMD and family 18h processor(which is not in case now),
the code will fall through and print out "Unsupported family".


diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 2ab4d61..f7adc47 100644
+       case 0x18:
+               if (c->x86_vendor == X86_VENDOR_HYGON) {
+                       xec_mask = 0x3f;
+                       if (!boot_cpu_has(X86_FEATURE_SMCA)) {
+                               pr_warn("Decoding supported only on Scalable MCA processors.\n");
+                               goto err_out;
+                       }
+                       break;
+               }

The 'break' statement could be moved outside of the "if (c->x86_vendor
== X86_VENDOR_HYGON)" block, this is to allow case 0x18 to reach the
'break' statement if the vendor is not X86_VENDOR_HYGON.

For the same reason as previous, if the vendor is not X86_VENDOR_HYGON,
it's not a valid vendor by now, and should fall through to the default
case and print out error message.

Thanks,
Pu Wen




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux