Re: [PATCH v2 8/8] jump_table: move entries into ro_after_init region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+++ Ard Biesheuvel [02/07/18 20:11 +0200]:
The __jump_table sections emitted into the core kernel and into
each module consist of statically initialized references into
other parts of the code, and with the exception of entries that
point into init code, which are defused at post-init time, these
data structures are never modified.

So let's move them into the ro_after_init section, to prevent them
from being corrupted inadvertently by buggy code, or deliberately
by an attacker.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>

For module parts:

Acked-by: Jessica Yu <jeyu@xxxxxxxxxx>

---
arch/arm/kernel/vmlinux-xip.lds.S |  1 +
arch/s390/kernel/vmlinux.lds.S    |  1 +
include/asm-generic/vmlinux.lds.h | 11 +++++++----
kernel/module.c                   |  9 +++++++++
4 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 3593d5c1acd2..763c41068ecc 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -118,6 +118,7 @@ SECTIONS
	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
	.data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
		*(.data..ro_after_init)
+		JUMP_TABLE_DATA
	}
	_edata = .;

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index f0414f52817b..a7cf61e46f88 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -67,6 +67,7 @@ SECTIONS
	__start_ro_after_init = .;
	.data..ro_after_init : {
		 *(.data..ro_after_init)
+		JUMP_TABLE_DATA
	}
	EXCEPTION_TABLE(16)
	. = ALIGN(PAGE_SIZE);
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index e373e2e10f6a..ed6befa4c47b 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -256,10 +256,6 @@
	STRUCT_ALIGN();							\
	*(__tracepoints)						\
	/* implement dynamic printk debug */				\
-	. = ALIGN(8);                                                   \
-	__start___jump_table = .;					\
-	KEEP(*(__jump_table))                                           \
-	__stop___jump_table = .;					\
	. = ALIGN(8);							\
	__start___verbose = .;						\
	KEEP(*(__verbose))                                              \
@@ -303,6 +299,12 @@
	. = __start_init_task + THREAD_SIZE;				\
	__end_init_task = .;

+#define JUMP_TABLE_DATA							\
+	. = ALIGN(8);							\
+	__start___jump_table = .;					\
+	KEEP(*(__jump_table))						\
+	__stop___jump_table = .;
+
/*
 * Allow architectures to handle ro_after_init data on their
 * own by defining an empty RO_AFTER_INIT_DATA.
@@ -311,6 +313,7 @@
#define RO_AFTER_INIT_DATA						\
	__start_ro_after_init = .;					\
	*(.data..ro_after_init)						\
+	JUMP_TABLE_DATA							\
	__end_ro_after_init = .;
#endif

diff --git a/kernel/module.c b/kernel/module.c
index 7cb82e0fcac0..0d4e320e41cd 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3349,6 +3349,15 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
	 * Note: ro_after_init sections also have SHF_{WRITE,ALLOC} set.
	 */
	ndx = find_sec(info, ".data..ro_after_init");
+	if (ndx)
+		info->sechdrs[ndx].sh_flags |= SHF_RO_AFTER_INIT;
+	/*
+	 * Mark the __jump_table section as ro_after_init as well: these data
+	 * structures are never modified, with the exception of entries that
+	 * refer to code in the __init section, which are annotated as such
+	 * at module load time.
+	 */
+	ndx = find_sec(info, "__jump_table");
	if (ndx)
		info->sechdrs[ndx].sh_flags |= SHF_RO_AFTER_INIT;

--
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux