On Thu, Mar 15, 2018 at 02:15:49AM +0800, John Garry wrote:
> This patchset supports the IPMI-bt device attached to the Low-Pin-Count
> interface implemented on Hisilicon Hip06/Hip07 SoC.
> -----------
> | LPC host|
> | |
> -----------
> |
> _____________V_______________LPC
> | |
> V V
> ------------
> | BT(ipmi)|
> ------------
> ...
> Gabriele Paoloni (2):
> PCI: Remove unused __weak attribute in pci_register_io_range()
> PCI: Add fwnode handler as input param of pci_register_io_range()
>
> John Garry (4):
> ACPI / scan: rename acpi_is_serial_bus_slave() to widen use
> ACPI / scan: do not enumerate Indirect IO host children
> HISI LPC: Add ACPI support
> MAINTAINERS: Add maintainer for HiSilicon LPC driver
>
> Zhichang Yuan (4):
> LIB: Introduce a generic PIO mapping method
> PCI: Apply the new generic I/O management on PCI IO hosts
> OF: Add missing I/O range exception for indirect-IO devices
> HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
>
> .../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ++
> MAINTAINERS | 7 +
> drivers/acpi/pci_root.c | 8 +-
> drivers/acpi/scan.c | 33 +-
> drivers/bus/Kconfig | 8 +
> drivers/bus/Makefile | 2 +
> drivers/bus/hisi_lpc.c | 623 +++++++++++++++++++++
> drivers/of/address.c | 96 +++-
> drivers/pci/pci.c | 95 +---
> include/acpi/acpi_bus.h | 2 +-
> include/asm-generic/io.h | 4 +-
> include/linux/logic_pio.h | 124 ++++
> include/linux/pci.h | 3 +-
> lib/Kconfig | 15 +
> lib/Makefile | 2 +
> lib/logic_pio.c | 282 ++++++++++
> 16 files changed, 1229 insertions(+), 108 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
> create mode 100644 drivers/bus/hisi_lpc.c
> create mode 100644 include/linux/logic_pio.h
> create mode 100644 lib/logic_pio.c
I applied this whole series to pci/lpc for v4.17.
I made the following whitespace and other trivial corrections.
Hopefully I didn't break anything.
--- changelogs.orig 2018-03-21 18:37:47.209217927 -0500
+++ changelogs 2018-03-21 18:37:35.993074570 -0500
@@ -1,29 +1,31 @@
-commit cc88cacce96a
+commit eb3a2ff7e72e
Author: John Garry <john.garry@xxxxxxxxxx>
Date: Thu Mar 15 02:15:59 2018 +0800
- MAINTAINERS: Add maintainer for HiSilicon LPC driver
+ MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
- Added maintainer for drivers/bus/hisi_lpc.c
+ Add John Garry as maintainer for drivers/bus/hisi_lpc.c, the HiSilicon LPC
+ driver.
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
-commit e6e915fd9c90
+commit 6d22e66ef6ea
Author: John Garry <john.garry@xxxxxxxxxx>
Date: Thu Mar 15 02:15:58 2018 +0800
HISI LPC: Add ACPI support
- Based on the previous patches, this patch supports the
- LPC host on hip06/hip07 for ACPI FW.
+ Based on the previous patches, this patch supports the LPC host on
+ Hip06/Hip07 for ACPI FW.
- It is the responsibility of the LPC host driver to
- enumerate the child devices, as the ACPI scan code will
- not enumerate children of "indirect IO" hosts.
+ It is the responsibility of the LPC host driver to enumerate the child
+ devices, as the ACPI scan code will not enumerate children of "indirect IO"
+ hosts.
+
+ The ACPI table for the LPC host controller and the child devices is in the
+ following format:
- The ACPI table for the LPC host controller and the child
- devices is in the following format:
Device (LPC0) {
Name (_HID, "HISI0191") // HiSi LPC
Name (_CRS, ResourceTemplate () {
@@ -50,216 +52,214 @@
)
})
- Since the IO resources of the child devices need to be
- translated from LPC bus addresses to logical PIO addresses,
- and we shouldn't modify the resources of the devices
- generated in the FW scan, a per-child MFD is created as
- a substitute. The MFD IO resources will be the translated
- bus addresses of the ACPI child.
+ Since the IO resources of the child devices need to be translated from LPC
+ bus addresses to logical PIO addresses, and we shouldn't modify the
+ resources of the devices generated in the FW scan, a per-child MFD is
+ created as a substitute. The MFD IO resources will be the translated bus
+ addresses of the ACPI child.
+ Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
-commit 3e1f89c344c6
+commit ac3f7a357d2d
Author: John Garry <john.garry@xxxxxxxxxx>
Date: Thu Mar 15 02:15:57 2018 +0800
- ACPI / scan: do not enumerate Indirect IO host children
+ ACPI / scan: Do not enumerate Indirect IO host children
- Through the logical PIO framework systems which otherwise have
- no IO space access to legacy ISA/LPC devices may access these
- devices through so-called "indirect IO" method. In this, IO
- space accesses for non-PCI hosts are redirected to a host
- LLDD to manually generate the IO space (bus) accesses. Hosts
- are able to register a region in logical PIO space to map to
- its bus address range.
-
- Indirect IO child devices have an associated host-specific bus
- address. Special translation is required to map between
- a logical PIO address for a device and it's host bus address.
-
- Since in the ACPI tables the child device IO resources would
- be the host-specific values, it is required the ACPI scan code
- should not enumerate these devices, and that this should be
- the responsibility of the host driver so that it can "fixup"
- the resources so that they map to the appropriate logical PIO
- addresses.
-
- To avoid enumerating these child devices, we add a check from
- acpi_device_enumeration_by_parent() as to whether the parent
- for a device is a member of a known list of "indirect IO" hosts.
- For now, the HiSilicon LPC host controller ID is added.
+ Through the logical PIO framework, systems which otherwise have no IO space
+ access to legacy ISA/LPC devices may access these devices through so-called
+ "indirect IO" method. In this, IO space accesses for non-PCI hosts are
+ redirected to a host LLDD to manually generate the IO space (bus) accesses.
+ Hosts are able to register a region in logical PIO space to map to its bus
+ address range.
+
+ Indirect IO child devices have an associated host-specific bus address.
+ Special translation is required to map between a logical PIO address for a
+ device and its host bus address.
+
+ Since in the ACPI tables the child device IO resources would be the
+ host-specific values, it is required the ACPI scan code should not
+ enumerate these devices, and that this should be the responsibility of the
+ host driver so that it can "fixup" the resources so that they map to the
+ appropriate logical PIO addresses.
+
+ To avoid enumerating these child devices, add a check from
+ acpi_device_enumeration_by_parent() as to whether the parent for a device
+ is a member of a known list of "indirect IO" hosts. For now, the HiSilicon
+ LPC host controller ID is added.
- Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
- Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
+ Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
-commit b4eee6c070c3
+commit 87200d40b07a
Author: John Garry <john.garry@xxxxxxxxxx>
Date: Thu Mar 15 02:15:56 2018 +0800
- ACPI / scan: rename acpi_is_serial_bus_slave() to widen use
+ ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
- Currently the ACPI scan has special handling for serial bus
- slaves, in that it makes it the responsibility of the the slave
- device's parent to enumerate the device.
-
- To support in future other types of slave devices which require
- the same special handling, but where the bus is not strictly a
- serial bus - such as devices on the HiSilicon LPC controller bus -
- rename acpi_is_serial_bus_slave() to
- acpi_device_enumeration_by_parent(), so that the name can fit the
- wider purpose.
+ Currently the ACPI scan has special handling for serial bus slaves, in that
+ it makes it the responsibility of the slave device's parent to enumerate
+ the device.
+
+ To support other types of slave devices which require the same special
+ handling but where the bus is not strictly a serial bus, such as devices on
+ the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to
+ acpi_device_enumeration_by_parent(), so that the name can fit the wider
+ purpose.
- Associated device flag acpi_device_flags.serial_bus_slave is also
- renamed to .enumeration_by_parent.
+ Also rename the associated device flag acpi_device_flags.serial_bus_slave
+ to .enumeration_by_parent.
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
-commit d9de40ca46a7
+commit a9a860ecbea9
Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
-Date: Wed Mar 21 18:33:39 2018 -0500
+Date: Wed Mar 21 17:23:02 2018 -0500
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
- The low-pin-count(LPC) interface of Hip06/Hip07 accesses the peripherals in
- I/O port addresses. This patch implements the LPC host controller driver
- which perform the I/O operations on the underlying hardware.
- We don't want to touch those existing peripherals' driver, such as ipmi-bt.
- So this driver applies the indirect-IO introduced in the previous patch
- after registering an indirect-IO node to the indirect-IO devices list which
- will be searched in the I/O accessors to retrieve the host-local I/O port.
-
- The driver config is set as a bool instead of a trisate. The reason
- here is that, by the very nature of the driver providing a logical
- PIO range, it does not make sense to have this driver as a loadable
- module. Another more specific reason is that the Huawei D03 board
- which includes hip06 SoC requires the LPC bus for UART console, so
- should be built in.
+ The low-pin-count (LPC) interface of Hip06/Hip07 accesses I/O port space of
+ peripherals.
+ Implement the LPC host controller driver which performs the I/O operations
+ on the underlying hardware. We don't want to touch existing drivers such
+ as ipmi-bt, so this driver applies the indirect-IO introduced in the
+ previous patch after registering an indirect-IO node to the indirect-IO
+ devices list which will be searched by the I/O accessors to retrieve the
+ host-local I/O port.
+
+ The driver config is set as a bool instead of a tristate. The reason here
+ is that, by the very nature of the driver providing a logical PIO range, it
+ does not make sense to have this driver as a loadable module. Another more
+ specific reason is that the Huawei D03 board which includes Hip06 SoC
+ requires the LPC bus for UART console, so should be built in.
+
+ Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Zou Rongrong <zourongrong@xxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
- Acked-by: Rob Herring <robh@xxxxxxxxxx> #dts part
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Acked-by: Rob Herring <robh@xxxxxxxxxx> #dts part
-commit db64f8630d14
+commit 03be72aeeb79
Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Date: Thu Mar 15 02:15:54 2018 +0800
- OF: Add missing I/O range exception for indirect-IO devices
+ of: Add missing I/O range exception for indirect-IO devices
There are some special ISA/LPC devices that work on a specific I/O range
- where it is not correct to specify a 'ranges' property in DTS parent node
- as CPU addresses translated from DTS node are only for memory space on
- some architectures, such as Arm64. Without the parent 'ranges' property,
- current of_translate_address() return an error.
+ where it is not correct to specify a 'ranges' property in the DTS parent
+ node as CPU addresses translated from DTS node are only for memory space on
+ some architectures, such as ARM64. Without the parent 'ranges' property,
+ of_translate_address() returns an error.
+
Here we add special handling for this case.
+
During the OF address translation, some checking will be performed to
- identify whether the device node is registered as indirect-IO. If yes,
+ identify whether the device node is registered as indirect-IO. If it is,
the I/O translation will be done in a different way from that one of PCI
- MMIO. In this way, the I/O 'reg' property of the special ISA/LPC devices
+ MMIO. In this way, the I/O 'reg' property of the special ISA/LPC devices
will be parsed correctly.
+ Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
- Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> #earlier draft
- Acked-by: Rob Herring <robh@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> # earlier draft
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
+ Acked-by: Rob Herring <robh@xxxxxxxxxx>
-commit 2add4c7b6bb7
+commit 54106314daf5
Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Date: Thu Mar 15 02:15:53 2018 +0800
PCI: Apply the new generic I/O management on PCI IO hosts
- After introducing the new generic I/O space management(Logical PIO), the
+ After introducing the new generic I/O space management (Logical PIO), the
original PCI MMIO relevant helpers need to be updated based on the new
interfaces defined in logical PIO.
- This patch adapts the corresponding code to match the changes introduced
- by logical PIO.
+ Adapt the corresponding code to match the changes introduced by logical
+ PIO.
+
+ Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
- Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> #earlier draft
- Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> # earlier draft
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
-commit cb37d289dfc4
+commit 32f7562cfd58
Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Date: Thu Mar 15 02:15:52 2018 +0800
PCI: Add fwnode handler as input param of pci_register_io_range()
- In preparation for having the PCI MMIO helpers to use the new generic
- I/O space management(logical PIO) we need to add the fwnode handler as
+ In preparation for having the PCI MMIO helpers use the new generic I/O
+ space management (logical PIO) we need to add the fwnode handler as an
extra input parameter.
- This patch changes the signature of pci_register_io_range() and of
- its callers as needed.
- Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
- Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Acked-by: Rob Herring <robh@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
+ Changes the signature of pci_register_io_range() and its callers as
+ needed.
+
Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
+ Acked-by: Rob Herring <robh@xxxxxxxxxx>
-commit 0b0694ca8843
+commit c9f9c9eed8e2
Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Date: Thu Mar 15 02:15:51 2018 +0800
- PCI: Remove unused __weak attribute in pci_register_io_range()
+ PCI: Remove __weak tag from pci_register_io_range()
- Currently pci_register_io_range() has only one definition;
- therefore there is no use of the __weak attribute.
+ pci_register_io_range() has only one definition, so there is no need for
+ the __weak attribute. Remove it.
- Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
- Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
+ Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
-commit f3ac523feb71
+commit e180fa3830cf
Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Date: Thu Mar 15 02:15:50 2018 +0800
- LIB: Introduce a generic PIO mapping method
+ lib: Add generic PIO mapping method
- In commit 41f8bba7f555 ("of/pci: Add pci_register_io_range() and
- pci_pio_to_address()"), a new I/O space management was supported. With
- that driver, the I/O ranges configured for PCI/PCIe hosts on some
- architectures can be mapped to logical PIO, converted easily between
- CPU address and the corresponding logicial PIO. Based on this, PCI
- I/O devices can be accessed in a memory read/write way through the
- unified in/out accessors.
-
- But on some archs/platforms, there are bus hosts which access I/O
- peripherals with host-local I/O port addresses rather than memory
- addresses after memory-mapped.
-
- To support those devices, a more generic I/O mapping method is introduced
- here. Through this patch, both the CPU addresses and the host-local port
- can be mapped into the logical PIO space with different logical/fake PIOs.
- After this, all the I/O accesses to either PCI MMIO devices or host-local
- I/O peripherals can be unified into the existing I/O accessors defined in
- asm-generic/io.h and be redirected to the right device-specific hooks
- based on the input logical PIO.
+ 41f8bba7f555 ("of/pci: Add pci_register_io_range() and
+ pci_pio_to_address()") added support for PCI I/O space mapped into CPU
+ physical memory space. With that support, the I/O ranges configured for
+ PCI/PCIe hosts on some architectures can be mapped to logical PIO and
+ converted easily between CPU address and the corresponding logical PIO.
+ Based on this, PCI I/O port space can be accessed via in/out accessors that
+ use memory read/write.
+
+ But on some platforms, there are bus hosts that access I/O port space with
+ host-local I/O port addresses rather than memory addresses.
+
+ Add a more generic I/O mapping method to support those devices. With this
+ patch, both the CPU addresses and the host-local port can be mapped into
+ the logical PIO space with different logical/fake PIOs. After this, all
+ the I/O accesses to either PCI MMIO devices or host-local I/O peripherals
+ can be unified into the existing I/O accessors defined in asm-generic/io.h
+ and be redirected to the right device-specific hooks based on the input
+ logical PIO.
+ Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
- Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
+ Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
index 213181f3aff9..10bd35f9207f 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
@@ -1,8 +1,8 @@
-Hisilicon Hip06 low-pin-count device
+Hisilicon Hip06 Low Pin Count device
Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
provides I/O access to some legacy ISA devices.
Hip06 is based on arm64 architecture where there is no I/O space. So, the
- I/O ports here are not cpu addresses, and there is no 'ranges' property in
+ I/O ports here are not CPU addresses, and there is no 'ranges' property in
LPC device node.
Required properties:
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 88739f697ab5..a3fad0f0292f 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -66,12 +66,12 @@ config BRCMSTB_GISB_ARB
and internal bus master decoding.
config HISILICON_LPC
- bool "Support for ISA I/O space on Hisilicon hip06/7"
+ bool "Support for ISA I/O space on HiSilicon Hip06/7"
depends on ARM64 && (ARCH_HISI || COMPILE_TEST)
select INDIRECT_PIO
help
- Driver needed for some legacy ISA devices attached to Low-Pin-Count
- on Hisilicon hip06/7 SoC.
+ Driver to enable I/O access to devices attached to the Low Pin
+ Count bus on the HiSilicon Hip06/7 SoC.
config IMX_WEIM
bool "Freescale EIM DRIVER"
diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 9d38cfa17da1..2d4611e4c339 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -4,7 +4,6 @@
* Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
* Author: Zou Rongrong <zourongrong@xxxxxxxxxx>
* Author: John Garry <john.garry@xxxxxxxxxx>
- *
*/
#include <linux/acpi.h>
@@ -23,16 +22,15 @@
#define DRV_NAME "hisi-lpc"
/*
- * Setting this bit means each IO operation will target to a
- * different port address:
- * 0 means repeatedly IO operations will stick on the same port,
- * such as BT;
+ * Setting this bit means each IO operation will target a different port
+ * address; 0 means repeated IO operations will use the same port,
+ * such as BT.
*/
#define FG_INCRADDR_LPC 0x02
struct lpc_cycle_para {
unsigned int opflags;
- unsigned int csize; /* the data length of each operation */
+ unsigned int csize; /* data length of each operation */
};
struct hisi_lpc_dev {
@@ -41,7 +39,7 @@ struct hisi_lpc_dev {
struct logic_pio_hwaddr *io_host;
};
-/* The maxIO cycle counts supported is four per operation at maximum */
+/* The max IO cycle counts supported is four per operation at maximum */
#define LPC_MAX_DWIDTH 4
#define LPC_REG_STARTUP_SIGNAL 0x00
@@ -57,27 +55,30 @@ struct hisi_lpc_dev {
#define LPC_REG_WDATA 0x24 /* write FIFO */
#define LPC_REG_RDATA 0x28 /* read FIFO */
-/* The minimal nanosecond interval for each query on LPC cycle status. */
+/* The minimal nanosecond interval for each query on LPC cycle status */
#define LPC_NSEC_PERWAIT 100
/*
- * The maximum waiting time is about 128us.
- * It is specific for stream I/O, such as ins.
+ * The maximum waiting time is about 128us. It is specific for stream I/O,
+ * such as ins.
+ *
* The fastest IO cycle time is about 390ns, but the worst case will wait
- * for extra 256 lpc clocks, so (256 + 13) * 30ns = 8 us. The maximum
- * burst cycles is 16. So, the maximum waiting time is about 128us under
- * worst case.
- * choose 1300 as the maximum.
+ * for extra 256 lpc clocks, so (256 + 13) * 30ns = 8 us. The maximum burst
+ * cycles is 16. So, the maximum waiting time is about 128us under worst
+ * case.
+ *
+ * Choose 1300 as the maximum.
*/
#define LPC_MAX_WAITCNT 1300
-/* About 10us. This is specific for single IO operation, such as inb. */
+
+/* About 10us. This is specific for single IO operations, such as inb */
#define LPC_PEROP_WAITCNT 100
-static inline int wait_lpc_idle(unsigned char *mbase,
- unsigned int waitcnt) {
- do {
- u32 status;
+static int wait_lpc_idle(unsigned char *mbase, unsigned int waitcnt)
+{
+ u32 status;
+ do {
status = readl(mbase + LPC_REG_OP_STATUS);
if (status & LPC_REG_OP_STATUS_IDLE)
return (status & LPC_REG_OP_STATUS_FINISHED) ? 0 : -EIO;
@@ -97,10 +98,9 @@ static inline int wait_lpc_idle(unsigned char *mbase,
*
* Returns 0 on success, non-zero on fail.
*/
-static int
-hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para,
- unsigned long addr, unsigned char *buf,
- unsigned long opcnt)
+static int hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev,
+ struct lpc_cycle_para *para, unsigned long addr,
+ unsigned char *buf, unsigned long opcnt)
{
unsigned int cmd_word;
unsigned int waitcnt;
@@ -121,9 +121,7 @@ hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para,
spin_lock_irqsave(&lpcdev->cycle_lock, flags);
writel_relaxed(opcnt, lpcdev->membase + LPC_REG_OP_LEN);
-
writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD);
-
writel_relaxed(addr, lpcdev->membase + LPC_REG_ADDR);
writel(LPC_REG_STARTUP_SIGNAL_START,
@@ -153,10 +151,9 @@ hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para,
*
* Returns 0 on success, non-zero on fail.
*/
-static int
-hisi_lpc_target_out(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para,
- unsigned long addr, const unsigned char *buf,
- unsigned long opcnt)
+static int hisi_lpc_target_out(struct hisi_lpc_dev *lpcdev,
+ struct lpc_cycle_para *para, unsigned long addr,
+ const unsigned char *buf, unsigned long opcnt)
{
unsigned int waitcnt;
unsigned long flags;
@@ -193,17 +190,17 @@ hisi_lpc_target_out(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para,
return ret;
}
-static inline unsigned long
-hisi_lpc_pio_to_addr(struct hisi_lpc_dev *lpcdev, unsigned long pio)
+static unsigned long hisi_lpc_pio_to_addr(struct hisi_lpc_dev *lpcdev,
+ unsigned long pio)
{
return pio - lpcdev->io_host->io_start + lpcdev->io_host->hw_start;
}
/*
* hisi_lpc_comm_in - input the data in a single operation
- * @hostdata: pointer to the device information relevant to LPC controller.
- * @pio: the target I/O port address.
- * @dwidth: the data length required to read from the target I/O port.
+ * @hostdata: pointer to the device information relevant to LPC controller
+ * @pio: the target I/O port address
+ * @dwidth: the data length required to read from the target I/O port
*
* When success, data is returned. Otherwise, ~0 is returned.
*/
@@ -233,16 +230,15 @@ static u32 hisi_lpc_comm_in(void *hostdata, unsigned long pio, size_t dwidth)
/*
* hisi_lpc_comm_out - output the data in a single operation
- * @hostdata: pointer to the device information relevant to LPC controller.
- * @pio: the target I/O port address.
- * @val: a value to be outputted from caller, maximum is four bytes.
- * @dwidth: the data width required writing to the target I/O port.
- *
- * This function is corresponding to out(b,w,l) only
+ * @hostdata: pointer to the device information relevant to LPC controller
+ * @pio: the target I/O port address
+ * @val: a value to be output from caller, maximum is four bytes
+ * @dwidth: the data width required writing to the target I/O port
*
+ * This function corresponds to out(b,w,l) only.
*/
static void hisi_lpc_comm_out(void *hostdata, unsigned long pio,
- u32 val, size_t dwidth)
+ u32 val, size_t dwidth)
{
struct hisi_lpc_dev *lpcdev = hostdata;
struct lpc_cycle_para iopara;
@@ -265,19 +261,17 @@ static void hisi_lpc_comm_out(void *hostdata, unsigned long pio,
/*
* hisi_lpc_comm_ins - input the data in the buffer in multiple operations
- * @hostdata: pointer to the device information relevant to LPC controller.
- * @pio: the target I/O port address.
- * @buffer: a buffer where read/input data bytes are stored.
- * @dwidth: the data width required writing to the target I/O port.
- * @count: how many data units whose length is dwidth will be read.
+ * @hostdata: pointer to the device information relevant to LPC controller
+ * @pio: the target I/O port address
+ * @buffer: a buffer where read/input data bytes are stored
+ * @dwidth: the data width required writing to the target I/O port
+ * @count: how many data units whose length is dwidth will be read
*
* When success, the data read back is stored in buffer pointed by buffer.
- * Returns 0 on success, -errno otherwise
- *
+ * Returns 0 on success, -errno otherwise.
*/
-static u32
-hisi_lpc_comm_ins(void *hostdata, unsigned long pio, void *buffer,
- size_t dwidth, unsigned int count)
+static u32 hisi_lpc_comm_ins(void *hostdata, unsigned long pio, void *buffer,
+ size_t dwidth, unsigned int count)
{
struct hisi_lpc_dev *lpcdev = hostdata;
unsigned char *buf = buffer;
@@ -308,16 +302,15 @@ hisi_lpc_comm_ins(void *hostdata, unsigned long pio, void *buffer,
/*
* hisi_lpc_comm_outs - output the data in the buffer in multiple operations
- * @hostdata: pointer to the device information relevant to LPC controller.
- * @pio: the target I/O port address.
- * @buffer: a buffer where write/output data bytes are stored.
- * @dwidth: the data width required writing to the target I/O port .
- * @count: how many data units whose length is dwidth will be written.
- *
+ * @hostdata: pointer to the device information relevant to LPC controller
+ * @pio: the target I/O port address
+ * @buffer: a buffer where write/output data bytes are stored
+ * @dwidth: the data width required writing to the target I/O port
+ * @count: how many data units whose length is dwidth will be written
*/
-static void
-hisi_lpc_comm_outs(void *hostdata, unsigned long pio, const void *buffer,
- size_t dwidth, unsigned int count)
+static void hisi_lpc_comm_outs(void *hostdata, unsigned long pio,
+ const void *buffer, size_t dwidth,
+ unsigned int count)
{
struct hisi_lpc_dev *lpcdev = hostdata;
struct lpc_cycle_para iopara;
@@ -384,13 +377,12 @@ static int hisi_lpc_acpi_xlat_io_res(struct acpi_device *adev,
* Returns 0 when successful, and a negative value for failure.
*
* For a given host controller, each child device will have an associated
- * host-relative address resource. This function will return the translated
+ * host-relative address resource. This function will return the translated
* logical PIO addresses for each child devices resources.
*/
static int hisi_lpc_acpi_set_io_res(struct device *child,
struct device *hostdev,
- const struct resource **res,
- int *num_res)
+ const struct resource **res, int *num_res)
{
struct acpi_device *adev;
struct acpi_device *host;
@@ -406,12 +398,11 @@ static int hisi_lpc_acpi_set_io_res(struct device *child,
host = to_acpi_device(hostdev);
adev = to_acpi_device(child);
- /* check the device state */
if (!adev->status.present) {
dev_dbg(child, "device is not present\n");
return -EIO;
}
- /* whether the child had been enumerated? */
+
if (acpi_device_enumerated(adev)) {
dev_dbg(child, "has been enumerated\n");
return -EIO;
@@ -450,7 +441,8 @@ static int hisi_lpc_acpi_set_io_res(struct device *child,
continue;
ret = hisi_lpc_acpi_xlat_io_res(adev, host, &resources[i]);
if (ret) {
- dev_err(child, "translate IO range failed(%d)\n", ret);
+ dev_err(child, "translate IO range %pR failed (%d)\n",
+ &resources[i], ret);
return ret;
}
}
@@ -501,7 +493,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
};
/*
- * For any instances of this host controller (hip06 and hip07
+ * For any instances of this host controller (Hip06 and Hip07
* are the only chipsets), we would not have multiple slaves
* with the same HID. And in any system we would have just one
* controller active. So don't worrry about MFD name clashes.
@@ -518,7 +510,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
&mfd_cell->resources,
&mfd_cell->num_resources);
if (ret) {
- dev_warn(&child->dev, "set resource fail(%d)\n", ret);
+ dev_warn(&child->dev, "set resource fail (%d)\n", ret);
return ret;
}
count++;
@@ -576,6 +568,7 @@ static int hisi_lpc_probe(struct platform_device *pdev)
range = devm_kzalloc(dev, sizeof(*range), GFP_KERNEL);
if (!range)
return -ENOMEM;
+
range->fwnode = dev->fwnode;
range->flags = LOGIC_PIO_INDIRECT;
range->size = PIO_INDIRECT_SIZE;
@@ -588,10 +581,10 @@ static int hisi_lpc_probe(struct platform_device *pdev)
lpcdev->io_host = range;
/* register the LPC host PIO resources */
- if (!acpi_device)
- ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
- else
+ if (acpi_device)
ret = hisi_lpc_acpi_probe(dev);
+ else
+ ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret)
return ret;
@@ -619,5 +612,4 @@ static struct platform_driver hisi_lpc_driver = {
},
.probe = hisi_lpc_probe,
};
-
builtin_platform_driver(hisi_lpc_driver);
diff --git a/drivers/of/address.c b/drivers/of/address.c
index c434f65922bc..53349912ac75 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -738,11 +738,11 @@ static u64 of_translate_ioport(struct device_node *dev, const __be32 *in_addr,
taddr = __of_translate_address(dev, in_addr, "ranges", &host);
if (host) {
- /* host specific port access */
+ /* host-specific port access */
port = logic_pio_trans_hwaddr(&host->fwnode, taddr, size);
of_node_put(host);
} else {
- /* memory mapped I/O range */
+ /* memory-mapped I/O range */
port = pci_address_to_pio(taddr);
}
diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
index 8c78ff449d81..cbd9d8495690 100644
--- a/include/linux/logic_pio.h
+++ b/include/linux/logic_pio.h
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
+ * Copyright (C) 2017 HiSilicon Limited, All Rights Reserved.
* Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
* Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
- *
*/
#ifndef __LINUX_LOGIC_PIO_H
@@ -13,7 +12,7 @@
enum {
LOGIC_PIO_INDIRECT, /* Indirect IO flag */
- LOGIC_PIO_CPU_MMIO, /* Memory mapped IO flag */
+ LOGIC_PIO_CPU_MMIO, /* Memory-mapped IO flag */
};
struct logic_pio_hwaddr {
@@ -104,8 +103,8 @@ void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
#endif
/*
- * Below we reserve 0x4000 bytes for Indirect IO as so far this library is only
- * used by Hisilicon LPC Host. If needed in future we may reserve a wider IO
+ * We reserve 0x4000 bytes for Indirect IO as so far this library is only
+ * used by the HiSilicon LPC Host. If needed, we can reserve a wider IO
* area by redefining the macro below.
*/
#define PIO_INDIRECT_SIZE 0x4000
@@ -118,7 +117,7 @@ struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
resource_size_t hw_addr, resource_size_t size);
int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
-extern resource_size_t logic_pio_to_hwaddr(unsigned long pio);
-extern unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);
+resource_size_t logic_pio_to_hwaddr(unsigned long pio);
+unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);
#endif /* __LINUX_LOGIC_PIO_H */
diff --git a/lib/Kconfig b/lib/Kconfig
index d9dd02cfe176..5fe577673b98 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -62,9 +62,10 @@ config INDIRECT_PIO
On some platforms where no separate I/O space exists, there are I/O
hosts which can not be accessed in MMIO mode. Using the logical PIO
mechanism, the host-local I/O resource can be mapped into system
- logic PIO space shared with MMIO hosts, such as PCI/PCIE, then the
- system can access the I/O devices with the mapped logic PIO through
+ logic PIO space shared with MMIO hosts, such as PCI/PCIe, then the
+ system can access the I/O devices with the mapped-logic PIO through
I/O accessors.
+
This way has relatively little I/O performance cost. Please make
sure your devices really need this configure item enabled.
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index 8394c2d4e534..dc3e9695f7f5 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
+ * Copyright (C) 2017 HiSilicon Limited, All Rights Reserved.
* Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
* Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
- *
*/
#define pr_fmt(fmt) "LOGIC PIO: " fmt
@@ -16,7 +15,7 @@
#include <linux/sizes.h>
#include <linux/slab.h>
-/* The unique hardware address list. */
+/* The unique hardware address list */
static LIST_HEAD(io_range_list);
static DEFINE_MUTEX(io_range_mutex);
@@ -25,11 +24,11 @@ static DEFINE_MUTEX(io_range_mutex);
/**
* logic_pio_register_range - register logical PIO range for a host
- * @new_range: pointer to the io range to be registered.
+ * @new_range: pointer to the IO range to be registered.
*
- * returns 0 on success, the error code in case of failure
+ * Returns 0 on success, the error code in case of failure.
*
- * Register a new io range node in the io range list.
+ * Register a new IO range node in the IO range list.
*/
int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
{
@@ -101,10 +100,9 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
* find_io_range_by_fwnode - find logical PIO range for given FW node
* @fwnode: FW node handle associated with logical PIO range
*
- * Returns pointer to node on success, NULL otherwise
+ * Returns pointer to node on success, NULL otherwise.
*
- * Traverse the io_range_list to find the registered node whose device node
- * and/or physical IO address match to.
+ * Traverse the io_range_list to find the registered node for @fwnode.
*/
struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
{
@@ -126,7 +124,7 @@ static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
if (in_range(pio, range->io_start, range->size))
return range;
}
- pr_err("PIO entry token invalid\n");
+ pr_err("PIO entry token %lx invalid\n", pio);
return NULL;
}
@@ -134,21 +132,20 @@ static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
* logic_pio_to_hwaddr - translate logical PIO to HW address
* @pio: logical PIO value
*
- * Returns HW address if valid, ~0 otherwise
+ * Returns HW address if valid, ~0 otherwise.
*
- * Translate the input logical pio to the corresponding hardware address.
- * The input pio should be unique in the whole logical PIO space.
+ * Translate the input logical PIO to the corresponding hardware address.
+ * The input PIO should be unique in the whole logical PIO space.
*/
resource_size_t logic_pio_to_hwaddr(unsigned long pio)
{
struct logic_pio_hwaddr *range;
- resource_size_t hwaddr = (resource_size_t)~0;
range = find_io_range(pio);
if (range)
- hwaddr = range->hw_start + pio - range->io_start;
+ return = range->hw_start + pio - range->io_start;
- return hwaddr;
+ return (resource_size_t)~0;
}
/**
@@ -159,15 +156,14 @@ resource_size_t logic_pio_to_hwaddr(unsigned long pio)
*
* Returns Logical PIO value if successful, ~0UL otherwise
*/
-unsigned long
-logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, resource_size_t addr,
- resource_size_t size)
+unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
+ resource_size_t addr, resource_size_t size)
{
struct logic_pio_hwaddr *range;
range = find_io_range_by_fwnode(fwnode);
if (!range || range->flags == LOGIC_PIO_CPU_MMIO) {
- pr_err("range not found or invalid\n");
+ pr_err("IO range not found or invalid\n");
return ~0UL;
}
if (range->size < size) {
@@ -178,8 +174,7 @@ logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, resource_size_t addr,
return addr - range->hw_start + range->io_start;
}
-unsigned long
-logic_pio_trans_cpuaddr(resource_size_t addr)
+unsigned long logic_pio_trans_cpuaddr(resource_size_t addr)
{
struct logic_pio_hwaddr *range;
@@ -189,7 +184,8 @@ logic_pio_trans_cpuaddr(resource_size_t addr)
if (in_range(addr, range->hw_start, range->size))
return addr - range->hw_start + range->io_start;
}
- pr_err("addr not registered in io_range_list\n");
+ pr_err("addr %llx not registered in io_range_list\n",
+ (unsigned long long) addr);
return ~0UL;
}
