Re: [Blackfin removal] [PATCH 07/28] watchdog: Remove Blackfin watchdog support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 15, 2018 at 06:50:07PM +0800, Aaron Wu wrote:
> Signed-off-by: Aaron Wu <aaron.wu@xxxxxxxxxx>
> 
> Remove Blackfin watchdog support

Signed-off statement comes last.

Anyway, wasn't this already submitted by Arnd ?

Guenter

> ---
>  drivers/watchdog/Kconfig    |  13 --
>  drivers/watchdog/Makefile   |   3 -
>  drivers/watchdog/bfin_wdt.c | 476 --------------------------------------------
>  3 files changed, 492 deletions(-)
>  delete mode 100644 drivers/watchdog/bfin_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 37460cd..6174e99 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -815,19 +815,6 @@ config SPRD_WATCHDOG
>  	  Say Y here to include watchdog timer supported
>  	  by Spreadtrum system.
>  
> -# BLACKFIN Architecture
> -
> -config BFIN_WDT
> -	tristate "Blackfin On-Chip Watchdog Timer"
> -	depends on BLACKFIN
> -	---help---
> -	  If you say yes here you will get support for the Blackfin On-Chip
> -	  Watchdog Timer. If you have one of these processors and wish to
> -	  have watchdog support enabled, say Y, otherwise say N.
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called bfin_wdt.
> -
>  # CRIS Architecture
>  
>  # FRV Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 0474d38..1971f86 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -91,9 +91,6 @@ obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
>  obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
>  obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
>  
> -# BLACKFIN Architecture
> -obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
> -
>  # CRIS Architecture
>  
>  # FRV Architecture
> diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
> deleted file mode 100644
> index aa4d2e8..0000000
> --- a/drivers/watchdog/bfin_wdt.c
> +++ /dev/null
> @@ -1,476 +0,0 @@
> -/*
> - * Blackfin On-Chip Watchdog Driver
> - *
> - * Originally based on softdog.c
> - * Copyright 2006-2010 Analog Devices Inc.
> - * Copyright 2006-2007 Michele d'Amico
> - * Copyright 1996 Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
> - *
> - * Enter bugs at http://blackfin.uclinux.org/
> - *
> - * Licensed under the GPL-2 or later.
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/platform_device.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/types.h>
> -#include <linux/timer.h>
> -#include <linux/miscdevice.h>
> -#include <linux/watchdog.h>
> -#include <linux/fs.h>
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/uaccess.h>
> -#include <asm/blackfin.h>
> -#include <asm/bfin_watchdog.h>
> -
> -#define stamp(fmt, args...) \
> -	pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
> -#define stampit() stamp("here i am")
> -
> -#define WATCHDOG_NAME "bfin-wdt"
> -
> -/* The BF561 has two watchdogs (one per core), but since Linux
> - * only runs on core A, we'll just work with that one.
> - */
> -#ifdef BF561_FAMILY
> -# define bfin_read_WDOG_CTL()    bfin_read_WDOGA_CTL()
> -# define bfin_read_WDOG_CNT()    bfin_read_WDOGA_CNT()
> -# define bfin_read_WDOG_STAT()   bfin_read_WDOGA_STAT()
> -# define bfin_write_WDOG_CTL(x)  bfin_write_WDOGA_CTL(x)
> -# define bfin_write_WDOG_CNT(x)  bfin_write_WDOGA_CNT(x)
> -# define bfin_write_WDOG_STAT(x) bfin_write_WDOGA_STAT(x)
> -#endif
> -
> -/* some defaults */
> -#define WATCHDOG_TIMEOUT 20
> -
> -static unsigned int timeout = WATCHDOG_TIMEOUT;
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -static const struct watchdog_info bfin_wdt_info;
> -static unsigned long open_check;
> -static char expect_close;
> -static DEFINE_SPINLOCK(bfin_wdt_spinlock);
> -
> -/**
> - *	bfin_wdt_keepalive - Keep the Userspace Watchdog Alive
> - *
> - *	The Userspace watchdog got a KeepAlive: schedule the next timeout.
> - */
> -static int bfin_wdt_keepalive(void)
> -{
> -	stampit();
> -	bfin_write_WDOG_STAT(0);
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_stop - Stop the Watchdog
> - *
> - *	Stops the on-chip watchdog.
> - */
> -static int bfin_wdt_stop(void)
> -{
> -	stampit();
> -	bfin_write_WDOG_CTL(WDEN_DISABLE);
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_start - Start the Watchdog
> - *
> - *	Starts the on-chip watchdog.  Automatically loads WDOG_CNT
> - *	into WDOG_STAT for us.
> - */
> -static int bfin_wdt_start(void)
> -{
> -	stampit();
> -	bfin_write_WDOG_CTL(WDEN_ENABLE | ICTL_RESET);
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_running - Check Watchdog status
> - *
> - *	See if the watchdog is running.
> - */
> -static int bfin_wdt_running(void)
> -{
> -	stampit();
> -	return ((bfin_read_WDOG_CTL() & WDEN_MASK) != WDEN_DISABLE);
> -}
> -
> -/**
> - *	bfin_wdt_set_timeout - Set the Userspace Watchdog timeout
> - *	@t: new timeout value (in seconds)
> - *
> - *	Translate the specified timeout in seconds into System Clock
> - *	terms which is what the on-chip Watchdog requires.
> - */
> -static int bfin_wdt_set_timeout(unsigned long t)
> -{
> -	u32 cnt, max_t, sclk;
> -	unsigned long flags;
> -
> -	sclk = get_sclk();
> -	max_t = -1 / sclk;
> -	cnt = t * sclk;
> -	stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt);
> -
> -	if (t > max_t) {
> -		pr_warn("timeout value is too large\n");
> -		return -EINVAL;
> -	}
> -
> -	spin_lock_irqsave(&bfin_wdt_spinlock, flags);
> -	{
> -		int run = bfin_wdt_running();
> -		bfin_wdt_stop();
> -		bfin_write_WDOG_CNT(cnt);
> -		if (run)
> -			bfin_wdt_start();
> -	}
> -	spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
> -
> -	timeout = t;
> -
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_open - Open the Device
> - *	@inode: inode of device
> - *	@file: file handle of device
> - *
> - *	Watchdog device is opened and started.
> - */
> -static int bfin_wdt_open(struct inode *inode, struct file *file)
> -{
> -	stampit();
> -
> -	if (test_and_set_bit(0, &open_check))
> -		return -EBUSY;
> -
> -	if (nowayout)
> -		__module_get(THIS_MODULE);
> -
> -	bfin_wdt_keepalive();
> -	bfin_wdt_start();
> -
> -	return nonseekable_open(inode, file);
> -}
> -
> -/**
> - *	bfin_wdt_close - Close the Device
> - *	@inode: inode of device
> - *	@file: file handle of device
> - *
> - *	Watchdog device is closed and stopped.
> - */
> -static int bfin_wdt_release(struct inode *inode, struct file *file)
> -{
> -	stampit();
> -
> -	if (expect_close == 42)
> -		bfin_wdt_stop();
> -	else {
> -		pr_crit("Unexpected close, not stopping watchdog!\n");
> -		bfin_wdt_keepalive();
> -	}
> -	expect_close = 0;
> -	clear_bit(0, &open_check);
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_write - Write to Device
> - *	@file: file handle of device
> - *	@buf: buffer to write
> - *	@count: length of buffer
> - *	@ppos: offset
> - *
> - *	Pings the watchdog on write.
> - */
> -static ssize_t bfin_wdt_write(struct file *file, const char __user *data,
> -						size_t len, loff_t *ppos)
> -{
> -	stampit();
> -
> -	if (len) {
> -		if (!nowayout) {
> -			size_t i;
> -
> -			/* In case it was set long ago */
> -			expect_close = 0;
> -
> -			for (i = 0; i != len; i++) {
> -				char c;
> -				if (get_user(c, data + i))
> -					return -EFAULT;
> -				if (c == 'V')
> -					expect_close = 42;
> -			}
> -		}
> -		bfin_wdt_keepalive();
> -	}
> -
> -	return len;
> -}
> -
> -/**
> - *	bfin_wdt_ioctl - Query Device
> - *	@file: file handle of device
> - *	@cmd: watchdog command
> - *	@arg: argument
> - *
> - *	Query basic information from the device or ping it, as outlined by the
> - *	watchdog API.
> - */
> -static long bfin_wdt_ioctl(struct file *file,
> -				unsigned int cmd, unsigned long arg)
> -{
> -	void __user *argp = (void __user *)arg;
> -	int __user *p = argp;
> -
> -	stampit();
> -
> -	switch (cmd) {
> -	case WDIOC_GETSUPPORT:
> -		if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info)))
> -			return -EFAULT;
> -		else
> -			return 0;
> -	case WDIOC_GETSTATUS:
> -	case WDIOC_GETBOOTSTATUS:
> -		return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p);
> -	case WDIOC_SETOPTIONS: {
> -		unsigned long flags;
> -		int options, ret = -EINVAL;
> -
> -		if (get_user(options, p))
> -			return -EFAULT;
> -
> -		spin_lock_irqsave(&bfin_wdt_spinlock, flags);
> -		if (options & WDIOS_DISABLECARD) {
> -			bfin_wdt_stop();
> -			ret = 0;
> -		}
> -		if (options & WDIOS_ENABLECARD) {
> -			bfin_wdt_start();
> -			ret = 0;
> -		}
> -		spin_unlock_irqrestore(&bfin_wdt_spinlock, flags);
> -		return ret;
> -	}
> -	case WDIOC_KEEPALIVE:
> -		bfin_wdt_keepalive();
> -		return 0;
> -	case WDIOC_SETTIMEOUT: {
> -		int new_timeout;
> -
> -		if (get_user(new_timeout, p))
> -			return -EFAULT;
> -		if (bfin_wdt_set_timeout(new_timeout))
> -			return -EINVAL;
> -	}
> -	/* Fall */
> -	case WDIOC_GETTIMEOUT:
> -		return put_user(timeout, p);
> -	default:
> -		return -ENOTTY;
> -	}
> -}
> -
> -#ifdef CONFIG_PM
> -static int state_before_suspend;
> -
> -/**
> - *	bfin_wdt_suspend - suspend the watchdog
> - *	@pdev: device being suspended
> - *	@state: requested suspend state
> - *
> - *	Remember if the watchdog was running and stop it.
> - *	TODO: is this even right?  Doesn't seem to be any
> - *	      standard in the watchdog world ...
> - */
> -static int bfin_wdt_suspend(struct platform_device *pdev, pm_message_t state)
> -{
> -	stampit();
> -
> -	state_before_suspend = bfin_wdt_running();
> -	bfin_wdt_stop();
> -
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_resume - resume the watchdog
> - *	@pdev: device being resumed
> - *
> - *	If the watchdog was running, turn it back on.
> - */
> -static int bfin_wdt_resume(struct platform_device *pdev)
> -{
> -	stampit();
> -
> -	if (state_before_suspend) {
> -		bfin_wdt_set_timeout(timeout);
> -		bfin_wdt_start();
> -	}
> -
> -	return 0;
> -}
> -#else
> -# define bfin_wdt_suspend NULL
> -# define bfin_wdt_resume NULL
> -#endif
> -
> -static const struct file_operations bfin_wdt_fops = {
> -	.owner		= THIS_MODULE,
> -	.llseek		= no_llseek,
> -	.write		= bfin_wdt_write,
> -	.unlocked_ioctl	= bfin_wdt_ioctl,
> -	.open		= bfin_wdt_open,
> -	.release	= bfin_wdt_release,
> -};
> -
> -static struct miscdevice bfin_wdt_miscdev = {
> -	.minor    = WATCHDOG_MINOR,
> -	.name     = "watchdog",
> -	.fops     = &bfin_wdt_fops,
> -};
> -
> -static const struct watchdog_info bfin_wdt_info = {
> -	.identity = "Blackfin Watchdog",
> -	.options  = WDIOF_SETTIMEOUT |
> -		    WDIOF_KEEPALIVEPING |
> -		    WDIOF_MAGICCLOSE,
> -};
> -
> -/**
> - *	bfin_wdt_probe - Initialize module
> - *
> - *	Registers the misc device.  Actual device
> - *	initialization is handled by bfin_wdt_open().
> - */
> -static int bfin_wdt_probe(struct platform_device *pdev)
> -{
> -	int ret;
> -
> -	ret = misc_register(&bfin_wdt_miscdev);
> -	if (ret) {
> -		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
> -		       WATCHDOG_MINOR, ret);
> -		return ret;
> -	}
> -
> -	pr_info("initialized: timeout=%d sec (nowayout=%d)\n",
> -		timeout, nowayout);
> -
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_remove - Initialize module
> - *
> - *	Unregisters the misc device.  Actual device
> - *	deinitialization is handled by bfin_wdt_close().
> - */
> -static int bfin_wdt_remove(struct platform_device *pdev)
> -{
> -	misc_deregister(&bfin_wdt_miscdev);
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_shutdown - Soft Shutdown Handler
> - *
> - *	Handles the soft shutdown event.
> - */
> -static void bfin_wdt_shutdown(struct platform_device *pdev)
> -{
> -	stampit();
> -
> -	bfin_wdt_stop();
> -}
> -
> -static struct platform_device *bfin_wdt_device;
> -
> -static struct platform_driver bfin_wdt_driver = {
> -	.probe     = bfin_wdt_probe,
> -	.remove    = bfin_wdt_remove,
> -	.shutdown  = bfin_wdt_shutdown,
> -	.suspend   = bfin_wdt_suspend,
> -	.resume    = bfin_wdt_resume,
> -	.driver    = {
> -		.name  = WATCHDOG_NAME,
> -	},
> -};
> -
> -/**
> - *	bfin_wdt_init - Initialize module
> - *
> - *	Checks the module params and registers the platform device & driver.
> - *	Real work is in the platform probe function.
> - */
> -static int __init bfin_wdt_init(void)
> -{
> -	int ret;
> -
> -	stampit();
> -
> -	/* Check that the timeout value is within range */
> -	if (bfin_wdt_set_timeout(timeout))
> -		return -EINVAL;
> -
> -	/* Since this is an on-chip device and needs no board-specific
> -	 * resources, we'll handle all the platform device stuff here.
> -	 */
> -	ret = platform_driver_register(&bfin_wdt_driver);
> -	if (ret) {
> -		pr_err("unable to register driver\n");
> -		return ret;
> -	}
> -
> -	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME,
> -								-1, NULL, 0);
> -	if (IS_ERR(bfin_wdt_device)) {
> -		pr_err("unable to register device\n");
> -		platform_driver_unregister(&bfin_wdt_driver);
> -		return PTR_ERR(bfin_wdt_device);
> -	}
> -
> -	return 0;
> -}
> -
> -/**
> - *	bfin_wdt_exit - Deinitialize module
> - *
> - *	Back out the platform device & driver steps.  Real work is in the
> - *	platform remove function.
> - */
> -static void __exit bfin_wdt_exit(void)
> -{
> -	platform_device_unregister(bfin_wdt_device);
> -	platform_driver_unregister(&bfin_wdt_driver);
> -}
> -
> -module_init(bfin_wdt_init);
> -module_exit(bfin_wdt_exit);
> -
> -MODULE_AUTHOR("Michele d'Amico, Mike Frysinger <vapier@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("Blackfin Watchdog Device Driver");
> -MODULE_LICENSE("GPL");
> -
> -module_param(timeout, uint, 0);
> -MODULE_PARM_DESC(timeout,
> -	"Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default="
> -		__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
> -
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> -	"Watchdog cannot be stopped once started (default="
> -		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux