[Blackfin removal] [PATCH 15/28] spi: Remove Blackfin SPI bus support

[Aaron Wu <aaron.wu@xxxxxxxxxx>]

Signed-off-by: Aaron Wu <aaron.wu@xxxxxxxxxx>

Remove Blackfin SPI bus support
---
 drivers/spi/Kconfig          |   19 -
 drivers/spi/Makefile         |    2 -
 drivers/spi/spi-adi-v3.c     |  984 ----------------------------
 drivers/spi/spi-bfin-sport.c |  919 --------------------------
 drivers/spi/spi-bfin5xx.c    | 1462 ------------------------------------------
 5 files changed, 3386 deletions(-)
 delete mode 100644 drivers/spi/spi-adi-v3.c
 delete mode 100644 drivers/spi/spi-bfin-sport.c
 delete mode 100644 drivers/spi/spi-bfin5xx.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6037839..1263014 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -115,25 +115,6 @@ config SPI_BCM2835AUX
 	  "universal SPI master", and the regular SPI controller.
 	  This driver is for the universal/auxiliary SPI controller.
 
-config SPI_BFIN5XX
-	tristate "SPI controller driver for ADI Blackfin5xx"
-	depends on BLACKFIN && !BF60x
-	help
-	  This is the SPI controller master driver for Blackfin 5xx processor.
-
-config SPI_ADI_V3
-	tristate "SPI controller v3 for ADI"
-	depends on BF60x
-	help
-	  This is the SPI controller v3 master driver
-	  found on Blackfin 60x processor.
-
-config SPI_BFIN_SPORT
-	tristate "SPI bus via Blackfin SPORT"
-	depends on BLACKFIN
-	help
-	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
-
 config SPI_BCM53XX
 	tristate "Broadcom BCM53xx SPI controller"
 	depends on ARCH_BCM_5301X
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 34c5f28..31ee30d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -24,9 +24,7 @@ obj-$(CONFIG_SPI_BCM53XX)		+= spi-bcm53xx.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BCM_QSPI)		+= spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
-obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
 obj-$(CONFIG_SPI_ADI_V3)                += spi-adi-v3.o
-obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
 obj-$(CONFIG_SPI_CADENCE)		+= spi-cadence.o
diff --git a/drivers/spi/spi-adi-v3.c b/drivers/spi/spi-adi-v3.c
deleted file mode 100644
index a16b25d..0000000
--- a/drivers/spi/spi-adi-v3.c
+++ /dev/null
@@ -1,984 +0,0 @@
-/*
- * Analog Devices SPI3 controller driver
- *
- * Copyright (c) 2014 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/adi_spi3.h>
-#include <linux/types.h>
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-enum adi_spi_state {
-	START_STATE,
-	RUNNING_STATE,
-	DONE_STATE,
-	ERROR_STATE
-};
-
-struct adi_spi_master;
-
-struct adi_spi_transfer_ops {
-	void (*write) (struct adi_spi_master *);
-	void (*read) (struct adi_spi_master *);
-	void (*duplex) (struct adi_spi_master *);
-};
-
-/* runtime info for spi master */
-struct adi_spi_master {
-	/* SPI framework hookup */
-	struct spi_master *master;
-
-	/* Regs base of SPI controller */
-	struct adi_spi_regs __iomem *regs;
-
-	/* Pin request list */
-	u16 *pin_req;
-
-	/* Message Transfer pump */
-	struct tasklet_struct pump_transfers;
-
-	/* Current message transfer state info */
-	struct spi_message *cur_msg;
-	struct spi_transfer *cur_transfer;
-	struct adi_spi_device *cur_chip;
-	unsigned transfer_len;
-
-	/* transfer buffer */
-	void *tx;
-	void *tx_end;
-	void *rx;
-	void *rx_end;
-
-	/* dma info */
-	unsigned int tx_dma;
-	unsigned int rx_dma;
-	dma_addr_t tx_dma_addr;
-	dma_addr_t rx_dma_addr;
-	unsigned long dummy_buffer; /* used in unidirectional transfer */
-	unsigned long tx_dma_size;
-	unsigned long rx_dma_size;
-	int tx_num;
-	int rx_num;
-
-	/* store register value for suspend/resume */
-	u32 control;
-	u32 ssel;
-
-	unsigned long sclk;
-	enum adi_spi_state state;
-
-	const struct adi_spi_transfer_ops *ops;
-};
-
-struct adi_spi_device {
-	u32 control;
-	u32 clock;
-	u32 ssel;
-
-	u8 cs;
-	u16 cs_chg_udelay; /* Some devices require > 255usec delay */
-	u32 cs_gpio;
-	u32 tx_dummy_val; /* tx value for rx only transfer */
-	bool enable_dma;
-	const struct adi_spi_transfer_ops *ops;
-};
-
-static void adi_spi_enable(struct adi_spi_master *drv_data)
-{
-	u32 ctl;
-
-	ctl = ioread32(&drv_data->regs->control);
-	ctl |= SPI_CTL_EN;
-	iowrite32(ctl, &drv_data->regs->control);
-}
-
-static void adi_spi_disable(struct adi_spi_master *drv_data)
-{
-	u32 ctl;
-
-	ctl = ioread32(&drv_data->regs->control);
-	ctl &= ~SPI_CTL_EN;
-	iowrite32(ctl, &drv_data->regs->control);
-}
-
-/* Caculate the SPI_CLOCK register value based on input HZ */
-static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz)
-{
-	u32 spi_clock = sclk / speed_hz;
-
-	if (spi_clock)
-		spi_clock--;
-	return spi_clock;
-}
-
-static int adi_spi_flush(struct adi_spi_master *drv_data)
-{
-	unsigned long limit = loops_per_jiffy << 1;
-
-	/* wait for stop and clear stat */
-	while (!(ioread32(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
-		cpu_relax();
-
-	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
-
-	return limit;
-}
-
-/* Chip select operation functions for cs_change flag */
-static void adi_spi_cs_active(struct adi_spi_master *drv_data, struct adi_spi_device *chip)
-{
-	if (likely(chip->cs < MAX_CTRL_CS)) {
-		u32 reg;
-		reg = ioread32(&drv_data->regs->ssel);
-		reg &= ~chip->ssel;
-		iowrite32(reg, &drv_data->regs->ssel);
-	} else {
-		gpio_set_value(chip->cs_gpio, 0);
-	}
-}
-
-static void adi_spi_cs_deactive(struct adi_spi_master *drv_data,
-				struct adi_spi_device *chip)
-{
-	if (likely(chip->cs < MAX_CTRL_CS)) {
-		u32 reg;
-		reg = ioread32(&drv_data->regs->ssel);
-		reg |= chip->ssel;
-		iowrite32(reg, &drv_data->regs->ssel);
-	} else {
-		gpio_set_value(chip->cs_gpio, 1);
-	}
-
-	/* Move delay here for consistency */
-	if (chip->cs_chg_udelay)
-		udelay(chip->cs_chg_udelay);
-}
-
-/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
-static inline void adi_spi_cs_enable(struct adi_spi_master *drv_data,
-					struct adi_spi_device *chip)
-{
-	if (chip->cs < MAX_CTRL_CS) {
-		u32 reg;
-		reg = ioread32(&drv_data->regs->ssel);
-		reg |= chip->ssel >> 8;
-		iowrite32(reg, &drv_data->regs->ssel);
-	}
-}
-
-static inline void adi_spi_cs_disable(struct adi_spi_master *drv_data,
-					struct adi_spi_device *chip)
-{
-	if (chip->cs < MAX_CTRL_CS) {
-		u32 reg;
-		reg = ioread32(&drv_data->regs->ssel);
-		reg &= ~(chip->ssel >> 8);
-		iowrite32(reg, &drv_data->regs->ssel);
-	}
-}
-
-/* stop controller and re-config current chip*/
-static void adi_spi_restore_state(struct adi_spi_master *drv_data)
-{
-	struct adi_spi_device *chip = drv_data->cur_chip;
-
-	/* Clear status and disable clock */
-	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
-	iowrite32(0x0, &drv_data->regs->rx_control);
-	iowrite32(0x0, &drv_data->regs->tx_control);
-	adi_spi_disable(drv_data);
-
-	/* Load the registers */
-	iowrite32(chip->control, &drv_data->regs->control);
-	iowrite32(chip->clock, &drv_data->regs->clock);
-
-	adi_spi_enable(drv_data);
-	drv_data->tx_num = drv_data->rx_num = 0;
-	/* we always choose tx transfer initiate */
-	iowrite32(SPI_RXCTL_REN, &drv_data->regs->rx_control);
-	iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI, &drv_data->regs->tx_control);
-	adi_spi_cs_active(drv_data, chip);
-}
-
-/* discard invalid rx data and empty rfifo */
-static inline void dummy_read(struct adi_spi_master *drv_data)
-{
-	while (!(ioread32(&drv_data->regs->status) & SPI_STAT_RFE))
-		ioread32(&drv_data->regs->rfifo);
-}
-
-static void adi_spi_u8_write(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->tx < drv_data->tx_end) {
-		iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		ioread32(&drv_data->regs->rfifo);
-	}
-}
-
-static void adi_spi_u8_read(struct adi_spi_master *drv_data)
-{
-	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
-
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(tx_val, &drv_data->regs->tfifo);
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
-	}
-}
-
-static void adi_spi_u8_duplex(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
-	}
-}
-
-static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u8 = {
-	.write  = adi_spi_u8_write,
-	.read   = adi_spi_u8_read,
-	.duplex = adi_spi_u8_duplex,
-};
-
-static void adi_spi_u16_write(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->tx < drv_data->tx_end) {
-		iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
-		drv_data->tx += 2;
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		ioread32(&drv_data->regs->rfifo);
-	}
-}
-
-static void adi_spi_u16_read(struct adi_spi_master *drv_data)
-{
-	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
-
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(tx_val, &drv_data->regs->tfifo);
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
-		drv_data->rx += 2;
-	}
-}
-
-static void adi_spi_u16_duplex(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
-		drv_data->tx += 2;
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
-		drv_data->rx += 2;
-	}
-}
-
-static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u16 = {
-	.write  = adi_spi_u16_write,
-	.read   = adi_spi_u16_read,
-	.duplex = adi_spi_u16_duplex,
-};
-
-static void adi_spi_u32_write(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->tx < drv_data->tx_end) {
-		iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
-		drv_data->tx += 4;
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		ioread32(&drv_data->regs->rfifo);
-	}
-}
-
-static void adi_spi_u32_read(struct adi_spi_master *drv_data)
-{
-	u32 tx_val = drv_data->cur_chip->tx_dummy_val;
-
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(tx_val, &drv_data->regs->tfifo);
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
-		drv_data->rx += 4;
-	}
-}
-
-static void adi_spi_u32_duplex(struct adi_spi_master *drv_data)
-{
-	dummy_read(drv_data);
-	while (drv_data->rx < drv_data->rx_end) {
-		iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
-		drv_data->tx += 4;
-		while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
-			cpu_relax();
-		*(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
-		drv_data->rx += 4;
-	}
-}
-
-static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u32 = {
-	.write  = adi_spi_u32_write,
-	.read   = adi_spi_u32_read,
-	.duplex = adi_spi_u32_duplex,
-};
-
-
-/* test if there is more transfer to be done */
-static void adi_spi_next_transfer(struct adi_spi_master *drv)
-{
-	struct spi_message *msg = drv->cur_msg;
-	struct spi_transfer *t = drv->cur_transfer;
-
-	/* Move to next transfer */
-	if (t->transfer_list.next != &msg->transfers) {
-		drv->cur_transfer = list_entry(t->transfer_list.next,
-			       struct spi_transfer, transfer_list);
-		drv->state = RUNNING_STATE;
-	} else {
-		drv->state = DONE_STATE;
-		drv->cur_transfer = NULL;
-	}
-}
-
-static void adi_spi_giveback(struct adi_spi_master *drv_data)
-{
-	struct adi_spi_device *chip = drv_data->cur_chip;
-
-	adi_spi_cs_deactive(drv_data, chip);
-	spi_finalize_current_message(drv_data->master);
-}
-
-static int adi_spi_setup_transfer(struct adi_spi_master *drv)
-{
-	struct spi_transfer *t = drv->cur_transfer;
-	u32 cr, cr_width;
-
-	if (t->tx_buf) {
-		drv->tx = (void *)t->tx_buf;
-		drv->tx_end = drv->tx + t->len;
-	} else {
-		drv->tx = NULL;
-	}
-
-	if (t->rx_buf) {
-		drv->rx = t->rx_buf;
-		drv->rx_end = drv->rx + t->len;
-	} else {
-		drv->rx = NULL;
-	}
-
-	drv->transfer_len = t->len;
-
-	/* bits per word setup */
-	switch (t->bits_per_word) {
-	case 8:
-		cr_width = SPI_CTL_SIZE08;
-		drv->ops = &adi_spi_transfer_ops_u8;
-		break;
-	case 16:
-		cr_width = SPI_CTL_SIZE16;
-		drv->ops = &adi_spi_transfer_ops_u16;
-		break;
-	case 32:
-		cr_width = SPI_CTL_SIZE32;
-		drv->ops = &adi_spi_transfer_ops_u32;
-		break;
-	default:
-		return -EINVAL;
-	}
-	cr = ioread32(&drv->regs->control) & ~SPI_CTL_SIZE;
-	cr |= cr_width;
-	iowrite32(cr, &drv->regs->control);
-
-	/* speed setup */
-	iowrite32(hz_to_spi_clock(drv->sclk, t->speed_hz), &drv->regs->clock);
-	return 0;
-}
-
-static int adi_spi_dma_xfer(struct adi_spi_master *drv_data)
-{
-	struct spi_transfer *t = drv_data->cur_transfer;
-	struct spi_message *msg = drv_data->cur_msg;
-	struct adi_spi_device *chip = drv_data->cur_chip;
-	u32 dma_config;
-	unsigned long word_count, word_size;
-	void *tx_buf, *rx_buf;
-
-	switch (t->bits_per_word) {
-	case 8:
-		dma_config = WDSIZE_8 | PSIZE_8;
-		word_count = drv_data->transfer_len;
-		word_size = 1;
-		break;
-	case 16:
-		dma_config = WDSIZE_16 | PSIZE_16;
-		word_count = drv_data->transfer_len / 2;
-		word_size = 2;
-		break;
-	default:
-		dma_config = WDSIZE_32 | PSIZE_32;
-		word_count = drv_data->transfer_len / 4;
-		word_size = 4;
-		break;
-	}
-
-	if (!drv_data->rx) {
-		tx_buf = drv_data->tx;
-		rx_buf = &drv_data->dummy_buffer;
-		drv_data->tx_dma_size = drv_data->transfer_len;
-		drv_data->rx_dma_size = sizeof(drv_data->dummy_buffer);
-		set_dma_x_modify(drv_data->tx_dma, word_size);
-		set_dma_x_modify(drv_data->rx_dma, 0);
-	} else if (!drv_data->tx) {
-		drv_data->dummy_buffer = chip->tx_dummy_val;
-		tx_buf = &drv_data->dummy_buffer;
-		rx_buf = drv_data->rx;
-		drv_data->tx_dma_size = sizeof(drv_data->dummy_buffer);
-		drv_data->rx_dma_size = drv_data->transfer_len;
-		set_dma_x_modify(drv_data->tx_dma, 0);
-		set_dma_x_modify(drv_data->rx_dma, word_size);
-	} else {
-		tx_buf = drv_data->tx;
-		rx_buf = drv_data->rx;
-		drv_data->tx_dma_size = drv_data->rx_dma_size
-					= drv_data->transfer_len;
-		set_dma_x_modify(drv_data->tx_dma, word_size);
-		set_dma_x_modify(drv_data->rx_dma, word_size);
-	}
-
-	drv_data->tx_dma_addr = dma_map_single(&msg->spi->dev,
-				(void *)tx_buf,
-				drv_data->tx_dma_size,
-				DMA_TO_DEVICE);
-	if (dma_mapping_error(&msg->spi->dev,
-				drv_data->tx_dma_addr))
-		return -ENOMEM;
-
-	drv_data->rx_dma_addr = dma_map_single(&msg->spi->dev,
-				(void *)rx_buf,
-				drv_data->rx_dma_size,
-				DMA_FROM_DEVICE);
-	if (dma_mapping_error(&msg->spi->dev,
-				drv_data->rx_dma_addr)) {
-		dma_unmap_single(&msg->spi->dev,
-				drv_data->tx_dma_addr,
-				drv_data->tx_dma_size,
-				DMA_TO_DEVICE);
-		return -ENOMEM;
-	}
-
-	dummy_read(drv_data);
-	set_dma_x_count(drv_data->tx_dma, word_count);
-	set_dma_x_count(drv_data->rx_dma, word_count);
-	set_dma_start_addr(drv_data->tx_dma, drv_data->tx_dma_addr);
-	set_dma_start_addr(drv_data->rx_dma, drv_data->rx_dma_addr);
-	dma_config |= DMAFLOW_STOP | RESTART | DI_EN;
-	set_dma_config(drv_data->tx_dma, dma_config);
-	set_dma_config(drv_data->rx_dma, dma_config | WNR);
-	enable_dma(drv_data->tx_dma);
-	enable_dma(drv_data->rx_dma);
-
-	iowrite32(SPI_RXCTL_REN | SPI_RXCTL_RDR_NE,
-			&drv_data->regs->rx_control);
-	iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF,
-			&drv_data->regs->tx_control);
-
-	return 0;
-}
-
-static int adi_spi_pio_xfer(struct adi_spi_master *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-
-	if (!drv_data->rx) {
-		/* write only half duplex */
-		drv_data->ops->write(drv_data);
-		if (drv_data->tx != drv_data->tx_end)
-			return -EIO;
-	} else if (!drv_data->tx) {
-		/* read only half duplex */
-		drv_data->ops->read(drv_data);
-		if (drv_data->rx != drv_data->rx_end)
-			return -EIO;
-	} else {
-		/* full duplex mode */
-		drv_data->ops->duplex(drv_data);
-		if (drv_data->tx != drv_data->tx_end)
-			return -EIO;
-	}
-
-	if (!adi_spi_flush(drv_data))
-		return -EIO;
-	msg->actual_length += drv_data->transfer_len;
-	tasklet_schedule(&drv_data->pump_transfers);
-	return 0;
-}
-
-static void adi_spi_pump_transfers(unsigned long data)
-{
-	struct adi_spi_master *drv_data = (struct adi_spi_master *)data;
-	struct spi_message *msg = NULL;
-	struct spi_transfer *t = NULL;
-	struct adi_spi_device *chip = NULL;
-	int ret;
-
-	/* Get current state information */
-	msg = drv_data->cur_msg;
-	t = drv_data->cur_transfer;
-	chip = drv_data->cur_chip;
-
-	/* Handle for abort */
-	if (drv_data->state == ERROR_STATE) {
-		msg->status = -EIO;
-		adi_spi_giveback(drv_data);
-		return;
-	}
-
-	if (drv_data->state == RUNNING_STATE) {
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
-		if (t->cs_change)
-			adi_spi_cs_deactive(drv_data, chip);
-		adi_spi_next_transfer(drv_data);
-		t = drv_data->cur_transfer;
-	}
-	/* Handle end of message */
-	if (drv_data->state == DONE_STATE) {
-		msg->status = 0;
-		adi_spi_giveback(drv_data);
-		return;
-	}
-
-	if ((t->len == 0) || (t->tx_buf == NULL && t->rx_buf == NULL)) {
-		/* Schedule next transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-		return;
-	}
-
-	ret = adi_spi_setup_transfer(drv_data);
-	if (ret) {
-		msg->status = ret;
-		adi_spi_giveback(drv_data);
-	}
-
-	iowrite32(0xFFFFFFFF, &drv_data->regs->status);
-	adi_spi_cs_active(drv_data, chip);
-	drv_data->state = RUNNING_STATE;
-
-	if (chip->enable_dma)
-		ret = adi_spi_dma_xfer(drv_data);
-	else
-		ret = adi_spi_pio_xfer(drv_data);
-	if (ret) {
-		msg->status = ret;
-		adi_spi_giveback(drv_data);
-	}
-}
-
-static int adi_spi_transfer_one_message(struct spi_master *master,
-					struct spi_message *m)
-{
-	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
-
-	drv_data->cur_msg = m;
-	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-	adi_spi_restore_state(drv_data);
-
-	drv_data->state = START_STATE;
-	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-					    struct spi_transfer, transfer_list);
-
-	tasklet_schedule(&drv_data->pump_transfers);
-	return 0;
-}
-
-#define MAX_SPI_SSEL	7
-
-static const u16 ssel[][MAX_SPI_SSEL] = {
-	{P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
-	P_SPI0_SSEL4, P_SPI0_SSEL5,
-	P_SPI0_SSEL6, P_SPI0_SSEL7},
-
-	{P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
-	P_SPI1_SSEL4, P_SPI1_SSEL5,
-	P_SPI1_SSEL6, P_SPI1_SSEL7},
-
-	{P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
-	P_SPI2_SSEL4, P_SPI2_SSEL5,
-	P_SPI2_SSEL6, P_SPI2_SSEL7},
-};
-
-static int adi_spi_setup(struct spi_device *spi)
-{
-	struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
-	struct adi_spi_device *chip = spi_get_ctldata(spi);
-	u32 ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
-	int ret = -EINVAL;
-
-	if (!chip) {
-		struct adi_spi3_chip *chip_info = spi->controller_data;
-
-		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-		if (!chip)
-			return -ENOMEM;
-
-		if (chip_info) {
-			if (chip_info->control & ~ctl_reg) {
-				dev_err(&spi->dev,
-					"do not set bits that the SPI framework manages\n");
-				goto error;
-			}
-			chip->control = chip_info->control;
-			chip->cs_chg_udelay = chip_info->cs_chg_udelay;
-			chip->tx_dummy_val = chip_info->tx_dummy_val;
-			chip->enable_dma = chip_info->enable_dma;
-		}
-		chip->cs = spi->chip_select;
-
-		if (chip->cs < MAX_CTRL_CS) {
-			chip->ssel = (1 << chip->cs) << 8;
-			ret = peripheral_request(ssel[spi->master->bus_num]
-					[chip->cs-1], dev_name(&spi->dev));
-			if (ret) {
-				dev_err(&spi->dev, "peripheral_request() error\n");
-				goto error;
-			}
-		} else {
-			chip->cs_gpio = chip->cs - MAX_CTRL_CS;
-			ret = gpio_request_one(chip->cs_gpio, GPIOF_OUT_INIT_HIGH,
-						dev_name(&spi->dev));
-			if (ret) {
-				dev_err(&spi->dev, "gpio_request_one() error\n");
-				goto error;
-			}
-		}
-		spi_set_ctldata(spi, chip);
-	}
-
-	/* force a default base state */
-	chip->control &= ctl_reg;
-
-	if (spi->mode & SPI_CPOL)
-		chip->control |= SPI_CTL_CPOL;
-	if (spi->mode & SPI_CPHA)
-		chip->control |= SPI_CTL_CPHA;
-	if (spi->mode & SPI_LSB_FIRST)
-		chip->control |= SPI_CTL_LSBF;
-	chip->control |= SPI_CTL_MSTR;
-	/* we choose software to controll cs */
-	chip->control &= ~SPI_CTL_ASSEL;
-
-	chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz);
-
-	adi_spi_cs_enable(drv_data, chip);
-	adi_spi_cs_deactive(drv_data, chip);
-
-	return 0;
-error:
-	if (chip) {
-		kfree(chip);
-		spi_set_ctldata(spi, NULL);
-	}
-
-	return ret;
-}
-
-static void adi_spi_cleanup(struct spi_device *spi)
-{
-	struct adi_spi_device *chip = spi_get_ctldata(spi);
-	struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
-
-	if (!chip)
-		return;
-
-	if (chip->cs < MAX_CTRL_CS) {
-		peripheral_free(ssel[spi->master->bus_num]
-					[chip->cs-1]);
-		adi_spi_cs_disable(drv_data, chip);
-	} else {
-		gpio_free(chip->cs_gpio);
-	}
-
-	kfree(chip);
-	spi_set_ctldata(spi, NULL);
-}
-
-static irqreturn_t adi_spi_tx_dma_isr(int irq, void *dev_id)
-{
-	struct adi_spi_master *drv_data = dev_id;
-	u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma);
-	u32 tx_ctl;
-
-	clear_dma_irqstat(drv_data->tx_dma);
-	if (dma_stat & DMA_DONE) {
-		drv_data->tx_num++;
-	} else {
-		dev_err(&drv_data->master->dev,
-				"spi tx dma error: %d\n", dma_stat);
-		if (drv_data->tx)
-			drv_data->state = ERROR_STATE;
-	}
-	tx_ctl = ioread32(&drv_data->regs->tx_control);
-	tx_ctl &= ~SPI_TXCTL_TDR_NF;
-	iowrite32(tx_ctl, &drv_data->regs->tx_control);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adi_spi_rx_dma_isr(int irq, void *dev_id)
-{
-	struct adi_spi_master *drv_data = dev_id;
-	struct spi_message *msg = drv_data->cur_msg;
-	u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma);
-
-	clear_dma_irqstat(drv_data->rx_dma);
-	if (dma_stat & DMA_DONE) {
-		drv_data->rx_num++;
-		/* we may fail on tx dma */
-		if (drv_data->state != ERROR_STATE)
-			msg->actual_length += drv_data->transfer_len;
-	} else {
-		drv_data->state = ERROR_STATE;
-		dev_err(&drv_data->master->dev,
-				"spi rx dma error: %d\n", dma_stat);
-	}
-	iowrite32(0, &drv_data->regs->tx_control);
-	iowrite32(0, &drv_data->regs->rx_control);
-	if (drv_data->rx_num != drv_data->tx_num)
-		dev_dbg(&drv_data->master->dev,
-				"dma interrupt missing: tx=%d,rx=%d\n",
-				drv_data->tx_num, drv_data->rx_num);
-	tasklet_schedule(&drv_data->pump_transfers);
-	return IRQ_HANDLED;
-}
-
-static int adi_spi_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adi_spi3_master *info = dev_get_platdata(dev);
-	struct spi_master *master;
-	struct adi_spi_master *drv_data;
-	struct resource *mem, *res;
-	unsigned int tx_dma, rx_dma;
-	struct clk *sclk;
-	int ret;
-
-	if (!info) {
-		dev_err(dev, "platform data missing!\n");
-		return -ENODEV;
-	}
-
-	sclk = devm_clk_get(dev, "spi");
-	if (IS_ERR(sclk)) {
-		dev_err(dev, "can not get spi clock\n");
-		return PTR_ERR(sclk);
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!res) {
-		dev_err(dev, "can not get tx dma resource\n");
-		return -ENXIO;
-	}
-	tx_dma = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!res) {
-		dev_err(dev, "can not get rx dma resource\n");
-		return -ENXIO;
-	}
-	rx_dma = res->start;
-
-	/* allocate master with space for drv_data */
-	master = spi_alloc_master(dev, sizeof(*drv_data));
-	if (!master) {
-		dev_err(dev, "can not alloc spi_master\n");
-		return -ENOMEM;
-	}
-	platform_set_drvdata(pdev, master);
-
-	/* the mode bits supported by this driver */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-
-	master->bus_num = pdev->id;
-	master->num_chipselect = info->num_chipselect;
-	master->cleanup = adi_spi_cleanup;
-	master->setup = adi_spi_setup;
-	master->transfer_one_message = adi_spi_transfer_one_message;
-	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
-				     SPI_BPW_MASK(8);
-
-	drv_data = spi_master_get_devdata(master);
-	drv_data->master = master;
-	drv_data->tx_dma = tx_dma;
-	drv_data->rx_dma = rx_dma;
-	drv_data->pin_req = info->pin_req;
-	drv_data->sclk = clk_get_rate(sclk);
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	drv_data->regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(drv_data->regs)) {
-		ret = PTR_ERR(drv_data->regs);
-		goto err_put_master;
-	}
-
-	/* request tx and rx dma */
-	ret = request_dma(tx_dma, "SPI_TX_DMA");
-	if (ret) {
-		dev_err(dev, "can not request SPI TX DMA channel\n");
-		goto err_put_master;
-	}
-	set_dma_callback(tx_dma, adi_spi_tx_dma_isr, drv_data);
-
-	ret = request_dma(rx_dma, "SPI_RX_DMA");
-	if (ret) {
-		dev_err(dev, "can not request SPI RX DMA channel\n");
-		goto err_free_tx_dma;
-	}
-	set_dma_callback(drv_data->rx_dma, adi_spi_rx_dma_isr, drv_data);
-
-	/* request CLK, MOSI and MISO */
-	ret = peripheral_request_list(drv_data->pin_req, "adi-spi3");
-	if (ret < 0) {
-		dev_err(dev, "can not request spi pins\n");
-		goto err_free_rx_dma;
-	}
-
-	iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
-	iowrite32(0x0000FE00, &drv_data->regs->ssel);
-	iowrite32(0x0, &drv_data->regs->delay);
-
-	tasklet_init(&drv_data->pump_transfers,
-			adi_spi_pump_transfers, (unsigned long)drv_data);
-	/* register with the SPI framework */
-	ret = devm_spi_register_master(dev, master);
-	if (ret) {
-		dev_err(dev, "can not  register spi master\n");
-		goto err_free_peripheral;
-	}
-
-	return ret;
-
-err_free_peripheral:
-	peripheral_free_list(drv_data->pin_req);
-err_free_rx_dma:
-	free_dma(rx_dma);
-err_free_tx_dma:
-	free_dma(tx_dma);
-err_put_master:
-	spi_master_put(master);
-
-	return ret;
-}
-
-static int adi_spi_remove(struct platform_device *pdev)
-{
-	struct spi_master *master = platform_get_drvdata(pdev);
-	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
-
-	adi_spi_disable(drv_data);
-	peripheral_free_list(drv_data->pin_req);
-	free_dma(drv_data->rx_dma);
-	free_dma(drv_data->tx_dma);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int adi_spi_suspend(struct device *dev)
-{
-	struct spi_master *master = dev_get_drvdata(dev);
-	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
-
-	spi_master_suspend(master);
-
-	drv_data->control = ioread32(&drv_data->regs->control);
-	drv_data->ssel = ioread32(&drv_data->regs->ssel);
-
-	iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
-	iowrite32(0x0000FE00, &drv_data->regs->ssel);
-	dma_disable_irq(drv_data->rx_dma);
-	dma_disable_irq(drv_data->tx_dma);
-
-	return 0;
-}
-
-static int adi_spi_resume(struct device *dev)
-{
-	struct spi_master *master = dev_get_drvdata(dev);
-	struct adi_spi_master *drv_data = spi_master_get_devdata(master);
-	int ret = 0;
-
-	/* bootrom may modify spi and dma status when resume in spi boot mode */
-	disable_dma(drv_data->rx_dma);
-
-	dma_enable_irq(drv_data->rx_dma);
-	dma_enable_irq(drv_data->tx_dma);
-	iowrite32(drv_data->control, &drv_data->regs->control);
-	iowrite32(drv_data->ssel, &drv_data->regs->ssel);
-
-	ret = spi_master_resume(master);
-	if (ret) {
-		free_dma(drv_data->rx_dma);
-		free_dma(drv_data->tx_dma);
-	}
-
-	return ret;
-}
-#endif
-static const struct dev_pm_ops adi_spi_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(adi_spi_suspend, adi_spi_resume)
-};
-
-MODULE_ALIAS("platform:adi-spi3");
-static struct platform_driver adi_spi_driver = {
-	.driver	= {
-		.name	= "adi-spi3",
-		.pm     = &adi_spi_pm_ops,
-	},
-	.remove		= adi_spi_remove,
-};
-
-module_platform_driver_probe(adi_spi_driver, adi_spi_probe);
-
-MODULE_DESCRIPTION("Analog Devices SPI3 controller driver");
-MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@xxxxxxxxx>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
deleted file mode 100644
index 01d0ba9..0000000
--- a/drivers/spi/spi-bfin-sport.c
+++ /dev/null
@@ -1,919 +0,0 @@
-/*
- * SPI bus via the Blackfin SPORT peripheral
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright 2009-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
-
-#include <asm/portmux.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/blackfin.h>
-#include <asm/bfin_sport.h>
-#include <asm/cacheflush.h>
-
-#define DRV_NAME	"bfin-sport-spi"
-#define DRV_DESC	"SPI bus via the Blackfin SPORT"
-
-MODULE_AUTHOR("Cliff Cai");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bfin-sport-spi");
-
-enum bfin_sport_spi_state {
-	START_STATE,
-	RUNNING_STATE,
-	DONE_STATE,
-	ERROR_STATE,
-};
-
-struct bfin_sport_spi_master_data;
-
-struct bfin_sport_transfer_ops {
-	void (*write) (struct bfin_sport_spi_master_data *);
-	void (*read) (struct bfin_sport_spi_master_data *);
-	void (*duplex) (struct bfin_sport_spi_master_data *);
-};
-
-struct bfin_sport_spi_master_data {
-	/* Driver model hookup */
-	struct device *dev;
-
-	/* SPI framework hookup */
-	struct spi_master *master;
-
-	/* Regs base of SPI controller */
-	struct sport_register __iomem *regs;
-	int err_irq;
-
-	/* Pin request list */
-	u16 *pin_req;
-
-	struct work_struct pump_messages;
-	spinlock_t lock;
-	struct list_head queue;
-	int busy;
-	bool run;
-
-	/* Message Transfer pump */
-	struct tasklet_struct pump_transfers;
-
-	/* Current message transfer state info */
-	enum bfin_sport_spi_state state;
-	struct spi_message *cur_msg;
-	struct spi_transfer *cur_transfer;
-	struct bfin_sport_spi_slave_data *cur_chip;
-	union {
-		void *tx;
-		u8 *tx8;
-		u16 *tx16;
-	};
-	void *tx_end;
-	union {
-		void *rx;
-		u8 *rx8;
-		u16 *rx16;
-	};
-	void *rx_end;
-
-	int cs_change;
-	struct bfin_sport_transfer_ops *ops;
-};
-
-struct bfin_sport_spi_slave_data {
-	u16 ctl_reg;
-	u16 baud;
-	u16 cs_chg_udelay;	/* Some devices require > 255usec delay */
-	u32 cs_gpio;
-	u16 idle_tx_val;
-	struct bfin_sport_transfer_ops *ops;
-};
-
-static void
-bfin_sport_spi_enable(struct bfin_sport_spi_master_data *drv_data)
-{
-	bfin_write_or(&drv_data->regs->tcr1, TSPEN);
-	bfin_write_or(&drv_data->regs->rcr1, TSPEN);
-	SSYNC();
-}
-
-static void
-bfin_sport_spi_disable(struct bfin_sport_spi_master_data *drv_data)
-{
-	bfin_write_and(&drv_data->regs->tcr1, ~TSPEN);
-	bfin_write_and(&drv_data->regs->rcr1, ~TSPEN);
-	SSYNC();
-}
-
-/* Caculate the SPI_BAUD register value based on input HZ */
-static u16
-bfin_sport_hz_to_spi_baud(u32 speed_hz)
-{
-	u_long clk, sclk = get_sclk();
-	int div = (sclk / (2 * speed_hz)) - 1;
-
-	if (div < 0)
-		div = 0;
-
-	clk = sclk / (2 * (div + 1));
-
-	if (clk > speed_hz)
-		div++;
-
-	return div;
-}
-
-/* Chip select operation functions for cs_change flag */
-static void
-bfin_sport_spi_cs_active(struct bfin_sport_spi_slave_data *chip)
-{
-	gpio_direction_output(chip->cs_gpio, 0);
-}
-
-static void
-bfin_sport_spi_cs_deactive(struct bfin_sport_spi_slave_data *chip)
-{
-	gpio_direction_output(chip->cs_gpio, 1);
-	/* Move delay here for consistency */
-	if (chip->cs_chg_udelay)
-		udelay(chip->cs_chg_udelay);
-}
-
-static void
-bfin_sport_spi_stat_poll_complete(struct bfin_sport_spi_master_data *drv_data)
-{
-	unsigned long timeout = jiffies + HZ;
-	while (!(bfin_read(&drv_data->regs->stat) & RXNE)) {
-		if (!time_before(jiffies, timeout))
-			break;
-	}
-}
-
-static void
-bfin_sport_spi_u8_writer(struct bfin_sport_spi_master_data *drv_data)
-{
-	u16 dummy;
-
-	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tx16, *drv_data->tx8++);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		dummy = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static void
-bfin_sport_spi_u8_reader(struct bfin_sport_spi_master_data *drv_data)
-{
-	u16 tx_val = drv_data->cur_chip->idle_tx_val;
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tx16, tx_val);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		*drv_data->rx8++ = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static void
-bfin_sport_spi_u8_duplex(struct bfin_sport_spi_master_data *drv_data)
-{
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tx16, *drv_data->tx8++);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		*drv_data->rx8++ = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u8 = {
-	.write  = bfin_sport_spi_u8_writer,
-	.read   = bfin_sport_spi_u8_reader,
-	.duplex = bfin_sport_spi_u8_duplex,
-};
-
-static void
-bfin_sport_spi_u16_writer(struct bfin_sport_spi_master_data *drv_data)
-{
-	u16 dummy;
-
-	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tx16, *drv_data->tx16++);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		dummy = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static void
-bfin_sport_spi_u16_reader(struct bfin_sport_spi_master_data *drv_data)
-{
-	u16 tx_val = drv_data->cur_chip->idle_tx_val;
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tx16, tx_val);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		*drv_data->rx16++ = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static void
-bfin_sport_spi_u16_duplex(struct bfin_sport_spi_master_data *drv_data)
-{
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tx16, *drv_data->tx16++);
-		bfin_sport_spi_stat_poll_complete(drv_data);
-		*drv_data->rx16++ = bfin_read(&drv_data->regs->rx16);
-	}
-}
-
-static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u16 = {
-	.write  = bfin_sport_spi_u16_writer,
-	.read   = bfin_sport_spi_u16_reader,
-	.duplex = bfin_sport_spi_u16_duplex,
-};
-
-/* stop controller and re-config current chip */
-static void
-bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data)
-{
-	struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip;
-
-	bfin_sport_spi_disable(drv_data);
-	dev_dbg(drv_data->dev, "restoring spi ctl state\n");
-
-	bfin_write(&drv_data->regs->tcr1, chip->ctl_reg);
-	bfin_write(&drv_data->regs->tclkdiv, chip->baud);
-	SSYNC();
-
-	bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS));
-	SSYNC();
-
-	bfin_sport_spi_cs_active(chip);
-}
-
-/* test if there is more transfer to be done */
-static enum bfin_sport_spi_state
-bfin_sport_spi_next_transfer(struct bfin_sport_spi_master_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	struct spi_transfer *trans = drv_data->cur_transfer;
-
-	/* Move to next transfer */
-	if (trans->transfer_list.next != &msg->transfers) {
-		drv_data->cur_transfer =
-		    list_entry(trans->transfer_list.next,
-			       struct spi_transfer, transfer_list);
-		return RUNNING_STATE;
-	}
-
-	return DONE_STATE;
-}
-
-/*
- * caller already set message->status;
- * dma and pio irqs are blocked give finished message back
- */
-static void
-bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data)
-{
-	struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip;
-	unsigned long flags;
-	struct spi_message *msg;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-	msg = drv_data->cur_msg;
-	drv_data->state = START_STATE;
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	schedule_work(&drv_data->pump_messages);
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	if (!drv_data->cs_change)
-		bfin_sport_spi_cs_deactive(chip);
-
-	if (msg->complete)
-		msg->complete(msg->context);
-}
-
-static irqreturn_t
-sport_err_handler(int irq, void *dev_id)
-{
-	struct bfin_sport_spi_master_data *drv_data = dev_id;
-	u16 status;
-
-	dev_dbg(drv_data->dev, "%s enter\n", __func__);
-	status = bfin_read(&drv_data->regs->stat) & (TOVF | TUVF | ROVF | RUVF);
-
-	if (status) {
-		bfin_write(&drv_data->regs->stat, status);
-		SSYNC();
-
-		bfin_sport_spi_disable(drv_data);
-		dev_err(drv_data->dev, "status error:%s%s%s%s\n",
-			status & TOVF ? " TOVF" : "",
-			status & TUVF ? " TUVF" : "",
-			status & ROVF ? " ROVF" : "",
-			status & RUVF ? " RUVF" : "");
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void
-bfin_sport_spi_pump_transfers(unsigned long data)
-{
-	struct bfin_sport_spi_master_data *drv_data = (void *)data;
-	struct spi_message *message = NULL;
-	struct spi_transfer *transfer = NULL;
-	struct spi_transfer *previous = NULL;
-	struct bfin_sport_spi_slave_data *chip = NULL;
-	unsigned int bits_per_word;
-	u32 tranf_success = 1;
-	u32 transfer_speed;
-	u8 full_duplex = 0;
-
-	/* Get current state information */
-	message = drv_data->cur_msg;
-	transfer = drv_data->cur_transfer;
-	chip = drv_data->cur_chip;
-
-	transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz);
-	bfin_write(&drv_data->regs->tclkdiv, transfer_speed);
-	SSYNC();
-
-	/*
-	 * if msg is error or done, report it back using complete() callback
-	 */
-
-	 /* Handle for abort */
-	if (drv_data->state == ERROR_STATE) {
-		dev_dbg(drv_data->dev, "transfer: we've hit an error\n");
-		message->status = -EIO;
-		bfin_sport_spi_giveback(drv_data);
-		return;
-	}
-
-	/* Handle end of message */
-	if (drv_data->state == DONE_STATE) {
-		dev_dbg(drv_data->dev, "transfer: all done!\n");
-		message->status = 0;
-		bfin_sport_spi_giveback(drv_data);
-		return;
-	}
-
-	/* Delay if requested at end of transfer */
-	if (drv_data->state == RUNNING_STATE) {
-		dev_dbg(drv_data->dev, "transfer: still running ...\n");
-		previous = list_entry(transfer->transfer_list.prev,
-				      struct spi_transfer, transfer_list);
-		if (previous->delay_usecs)
-			udelay(previous->delay_usecs);
-	}
-
-	if (transfer->len == 0) {
-		/* Move to next transfer of this msg */
-		drv_data->state = bfin_sport_spi_next_transfer(drv_data);
-		/* Schedule next transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-	}
-
-	if (transfer->tx_buf != NULL) {
-		drv_data->tx = (void *)transfer->tx_buf;
-		drv_data->tx_end = drv_data->tx + transfer->len;
-		dev_dbg(drv_data->dev, "tx_buf is %p, tx_end is %p\n",
-			transfer->tx_buf, drv_data->tx_end);
-	} else
-		drv_data->tx = NULL;
-
-	if (transfer->rx_buf != NULL) {
-		full_duplex = transfer->tx_buf != NULL;
-		drv_data->rx = transfer->rx_buf;
-		drv_data->rx_end = drv_data->rx + transfer->len;
-		dev_dbg(drv_data->dev, "rx_buf is %p, rx_end is %p\n",
-			transfer->rx_buf, drv_data->rx_end);
-	} else
-		drv_data->rx = NULL;
-
-	drv_data->cs_change = transfer->cs_change;
-
-	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word;
-	if (bits_per_word == 16)
-		drv_data->ops = &bfin_sport_transfer_ops_u16;
-	else
-		drv_data->ops = &bfin_sport_transfer_ops_u8;
-	bfin_write(&drv_data->regs->tcr2, bits_per_word - 1);
-	bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1);
-	bfin_write(&drv_data->regs->rcr2, bits_per_word - 1);
-
-	drv_data->state = RUNNING_STATE;
-
-	if (drv_data->cs_change)
-		bfin_sport_spi_cs_active(chip);
-
-	dev_dbg(drv_data->dev,
-		"now pumping a transfer: width is %d, len is %d\n",
-		bits_per_word, transfer->len);
-
-	/* PIO mode write then read */
-	dev_dbg(drv_data->dev, "doing IO transfer\n");
-
-	bfin_sport_spi_enable(drv_data);
-	if (full_duplex) {
-		/* full duplex mode */
-		BUG_ON((drv_data->tx_end - drv_data->tx) !=
-		       (drv_data->rx_end - drv_data->rx));
-		drv_data->ops->duplex(drv_data);
-
-		if (drv_data->tx != drv_data->tx_end)
-			tranf_success = 0;
-	} else if (drv_data->tx != NULL) {
-		/* write only half duplex */
-
-		drv_data->ops->write(drv_data);
-
-		if (drv_data->tx != drv_data->tx_end)
-			tranf_success = 0;
-	} else if (drv_data->rx != NULL) {
-		/* read only half duplex */
-
-		drv_data->ops->read(drv_data);
-		if (drv_data->rx != drv_data->rx_end)
-			tranf_success = 0;
-	}
-	bfin_sport_spi_disable(drv_data);
-
-	if (!tranf_success) {
-		dev_dbg(drv_data->dev, "IO write error!\n");
-		drv_data->state = ERROR_STATE;
-	} else {
-		/* Update total byte transferred */
-		message->actual_length += transfer->len;
-		/* Move to next transfer of this msg */
-		drv_data->state = bfin_sport_spi_next_transfer(drv_data);
-		if (drv_data->cs_change)
-			bfin_sport_spi_cs_deactive(chip);
-	}
-
-	/* Schedule next transfer tasklet */
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-/* pop a msg from queue and kick off real transfer */
-static void
-bfin_sport_spi_pump_messages(struct work_struct *work)
-{
-	struct bfin_sport_spi_master_data *drv_data;
-	unsigned long flags;
-	struct spi_message *next_msg;
-
-	drv_data = container_of(work, struct bfin_sport_spi_master_data, pump_messages);
-
-	/* Lock queue and check for queue work */
-	spin_lock_irqsave(&drv_data->lock, flags);
-	if (list_empty(&drv_data->queue) || !drv_data->run) {
-		/* pumper kicked off but no work to do */
-		drv_data->busy = 0;
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Make sure we are not already running a message */
-	if (drv_data->cur_msg) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Extract head of queue */
-	next_msg = list_entry(drv_data->queue.next,
-		struct spi_message, queue);
-
-	drv_data->cur_msg = next_msg;
-
-	/* Setup the SSP using the per chip configuration */
-	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-
-	list_del_init(&drv_data->cur_msg->queue);
-
-	/* Initialize message state */
-	drv_data->cur_msg->state = START_STATE;
-	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-					    struct spi_transfer, transfer_list);
-	bfin_sport_spi_restore_state(drv_data);
-	dev_dbg(drv_data->dev, "got a message to pump, "
-		"state is set to: baud %d, cs_gpio %i, ctl 0x%x\n",
-		drv_data->cur_chip->baud, drv_data->cur_chip->cs_gpio,
-		drv_data->cur_chip->ctl_reg);
-
-	dev_dbg(drv_data->dev,
-		"the first transfer len is %d\n",
-		drv_data->cur_transfer->len);
-
-	/* Mark as busy and launch transfers */
-	tasklet_schedule(&drv_data->pump_transfers);
-
-	drv_data->busy = 1;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-}
-
-/*
- * got a msg to transfer, queue it in drv_data->queue.
- * And kick off message pumper
- */
-static int
-bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-{
-	struct bfin_sport_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (!drv_data->run) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -ESHUTDOWN;
-	}
-
-	msg->actual_length = 0;
-	msg->status = -EINPROGRESS;
-	msg->state = START_STATE;
-
-	dev_dbg(&spi->dev, "adding an msg in transfer()\n");
-	list_add_tail(&msg->queue, &drv_data->queue);
-
-	if (drv_data->run && !drv_data->busy)
-		schedule_work(&drv_data->pump_messages);
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	return 0;
-}
-
-/* Called every time common spi devices change state */
-static int
-bfin_sport_spi_setup(struct spi_device *spi)
-{
-	struct bfin_sport_spi_slave_data *chip, *first = NULL;
-	int ret;
-
-	/* Only alloc (or use chip_info) on first setup */
-	chip = spi_get_ctldata(spi);
-	if (chip == NULL) {
-		struct bfin5xx_spi_chip *chip_info;
-
-		chip = first = kzalloc(sizeof(*chip), GFP_KERNEL);
-		if (!chip)
-			return -ENOMEM;
-
-		/* platform chip_info isn't required */
-		chip_info = spi->controller_data;
-		if (chip_info) {
-			/*
-			 * DITFS and TDTYPE are only thing we don't set, but
-			 * they probably shouldn't be changed by people.
-			 */
-			if (chip_info->ctl_reg || chip_info->enable_dma) {
-				ret = -EINVAL;
-				dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields\n");
-				goto error;
-			}
-			chip->cs_chg_udelay = chip_info->cs_chg_udelay;
-			chip->idle_tx_val = chip_info->idle_tx_val;
-		}
-	}
-
-	/* translate common spi framework into our register
-	 * following configure contents are same for tx and rx.
-	 */
-
-	if (spi->mode & SPI_CPHA)
-		chip->ctl_reg &= ~TCKFE;
-	else
-		chip->ctl_reg |= TCKFE;
-
-	if (spi->mode & SPI_LSB_FIRST)
-		chip->ctl_reg |= TLSBIT;
-	else
-		chip->ctl_reg &= ~TLSBIT;
-
-	/* Sport in master mode */
-	chip->ctl_reg |= ITCLK | ITFS | TFSR | LATFS | LTFS;
-
-	chip->baud = bfin_sport_hz_to_spi_baud(spi->max_speed_hz);
-
-	chip->cs_gpio = spi->chip_select;
-	ret = gpio_request(chip->cs_gpio, spi->modalias);
-	if (ret)
-		goto error;
-
-	dev_dbg(&spi->dev, "setup spi chip %s, width is %d\n",
-			spi->modalias, spi->bits_per_word);
-	dev_dbg(&spi->dev, "ctl_reg is 0x%x, GPIO is %i\n",
-			chip->ctl_reg, spi->chip_select);
-
-	spi_set_ctldata(spi, chip);
-
-	bfin_sport_spi_cs_deactive(chip);
-
-	return ret;
-
- error:
-	kfree(first);
-	return ret;
-}
-
-/*
- * callback for spi framework.
- * clean driver specific data
- */
-static void
-bfin_sport_spi_cleanup(struct spi_device *spi)
-{
-	struct bfin_sport_spi_slave_data *chip = spi_get_ctldata(spi);
-
-	if (!chip)
-		return;
-
-	gpio_free(chip->cs_gpio);
-
-	kfree(chip);
-}
-
-static int
-bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data)
-{
-	INIT_LIST_HEAD(&drv_data->queue);
-	spin_lock_init(&drv_data->lock);
-
-	drv_data->run = false;
-	drv_data->busy = 0;
-
-	/* init transfer tasklet */
-	tasklet_init(&drv_data->pump_transfers,
-		     bfin_sport_spi_pump_transfers, (unsigned long)drv_data);
-
-	INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages);
-
-	return 0;
-}
-
-static int
-bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (drv_data->run || drv_data->busy) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -EBUSY;
-	}
-
-	drv_data->run = true;
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	schedule_work(&drv_data->pump_messages);
-
-	return 0;
-}
-
-static inline int
-bfin_sport_spi_stop_queue(struct bfin_sport_spi_master_data *drv_data)
-{
-	unsigned long flags;
-	unsigned limit = 500;
-	int status = 0;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	/*
-	 * This is a bit lame, but is optimized for the common execution path.
-	 * A wait_queue on the drv_data->busy could be used, but then the common
-	 * execution path (pump_messages) would be required to call wake_up or
-	 * friends on every SPI message. Do this instead
-	 */
-	drv_data->run = false;
-	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		msleep(10);
-		spin_lock_irqsave(&drv_data->lock, flags);
-	}
-
-	if (!list_empty(&drv_data->queue) || drv_data->busy)
-		status = -EBUSY;
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	return status;
-}
-
-static inline int
-bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data)
-{
-	int status;
-
-	status = bfin_sport_spi_stop_queue(drv_data);
-	if (status)
-		return status;
-
-	flush_work(&drv_data->pump_messages);
-
-	return 0;
-}
-
-static int bfin_sport_spi_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct bfin5xx_spi_master *platform_info;
-	struct spi_master *master;
-	struct resource *res, *ires;
-	struct bfin_sport_spi_master_data *drv_data;
-	int status;
-
-	platform_info = dev_get_platdata(dev);
-
-	/* Allocate master with space for drv_data */
-	master = spi_alloc_master(dev, sizeof(*master) + 16);
-	if (!master) {
-		dev_err(dev, "cannot alloc spi_master\n");
-		return -ENOMEM;
-	}
-
-	drv_data = spi_master_get_devdata(master);
-	drv_data->master = master;
-	drv_data->dev = dev;
-	drv_data->pin_req = platform_info->pin_req;
-
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
-	master->bus_num = pdev->id;
-	master->num_chipselect = platform_info->num_chipselect;
-	master->cleanup = bfin_sport_spi_cleanup;
-	master->setup = bfin_sport_spi_setup;
-	master->transfer = bfin_sport_spi_transfer;
-
-	/* Find and map our resources */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(dev, "cannot get IORESOURCE_MEM\n");
-		status = -ENOENT;
-		goto out_error_get_res;
-	}
-
-	drv_data->regs = ioremap(res->start, resource_size(res));
-	if (drv_data->regs == NULL) {
-		dev_err(dev, "cannot map registers\n");
-		status = -ENXIO;
-		goto out_error_ioremap;
-	}
-
-	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!ires) {
-		dev_err(dev, "cannot get IORESOURCE_IRQ\n");
-		status = -ENODEV;
-		goto out_error_get_ires;
-	}
-	drv_data->err_irq = ires->start;
-
-	/* Initial and start queue */
-	status = bfin_sport_spi_init_queue(drv_data);
-	if (status) {
-		dev_err(dev, "problem initializing queue\n");
-		goto out_error_queue_alloc;
-	}
-
-	status = bfin_sport_spi_start_queue(drv_data);
-	if (status) {
-		dev_err(dev, "problem starting queue\n");
-		goto out_error_queue_alloc;
-	}
-
-	status = request_irq(drv_data->err_irq, sport_err_handler,
-		0, "sport_spi_err", drv_data);
-	if (status) {
-		dev_err(dev, "unable to request sport err irq\n");
-		goto out_error_irq;
-	}
-
-	status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
-	if (status) {
-		dev_err(dev, "requesting peripherals failed\n");
-		goto out_error_peripheral;
-	}
-
-	/* Register with the SPI framework */
-	platform_set_drvdata(pdev, drv_data);
-	status = spi_register_master(master);
-	if (status) {
-		dev_err(dev, "problem registering spi master\n");
-		goto out_error_master;
-	}
-
-	dev_info(dev, "%s, regs_base@%p\n", DRV_DESC, drv_data->regs);
-	return 0;
-
- out_error_master:
-	peripheral_free_list(drv_data->pin_req);
- out_error_peripheral:
-	free_irq(drv_data->err_irq, drv_data);
- out_error_irq:
- out_error_queue_alloc:
-	bfin_sport_spi_destroy_queue(drv_data);
- out_error_get_ires:
-	iounmap(drv_data->regs);
- out_error_ioremap:
- out_error_get_res:
-	spi_master_put(master);
-
-	return status;
-}
-
-/* stop hardware and remove the driver */
-static int bfin_sport_spi_remove(struct platform_device *pdev)
-{
-	struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev);
-	int status = 0;
-
-	if (!drv_data)
-		return 0;
-
-	/* Remove the queue */
-	status = bfin_sport_spi_destroy_queue(drv_data);
-	if (status)
-		return status;
-
-	/* Disable the SSP at the peripheral and SOC level */
-	bfin_sport_spi_disable(drv_data);
-
-	/* Disconnect from the SPI framework */
-	spi_unregister_master(drv_data->master);
-
-	peripheral_free_list(drv_data->pin_req);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int bfin_sport_spi_suspend(struct device *dev)
-{
-	struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev);
-	int status;
-
-	status = bfin_sport_spi_stop_queue(drv_data);
-	if (status)
-		return status;
-
-	/* stop hardware */
-	bfin_sport_spi_disable(drv_data);
-
-	return status;
-}
-
-static int bfin_sport_spi_resume(struct device *dev)
-{
-	struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev);
-	int status;
-
-	/* Enable the SPI interface */
-	bfin_sport_spi_enable(drv_data);
-
-	/* Start the queue running */
-	status = bfin_sport_spi_start_queue(drv_data);
-	if (status)
-		dev_err(drv_data->dev, "problem resuming queue\n");
-
-	return status;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_sport_spi_pm_ops, bfin_sport_spi_suspend,
-			bfin_sport_spi_resume);
-
-#define BFIN_SPORT_SPI_PM_OPS		(&bfin_sport_spi_pm_ops)
-#else
-#define BFIN_SPORT_SPI_PM_OPS		NULL
-#endif
-
-static struct platform_driver bfin_sport_spi_driver = {
-	.driver	= {
-		.name	= DRV_NAME,
-		.pm	= BFIN_SPORT_SPI_PM_OPS,
-	},
-	.probe   = bfin_sport_spi_probe,
-	.remove  = bfin_sport_spi_remove,
-};
-module_platform_driver(bfin_sport_spi_driver);
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
deleted file mode 100644
index 249c7a3..0000000
--- a/drivers/spi/spi-bfin5xx.c
+++ /dev/null
@@ -1,1462 +0,0 @@
-/*
- * Blackfin On-Chip SPI Driver
- *
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/cacheflush.h>
-
-#define DRV_NAME	"bfin-spi"
-#define DRV_AUTHOR	"Bryan Wu, Luke Yang"
-#define DRV_DESC	"Blackfin on-chip SPI Controller Driver"
-#define DRV_VERSION	"1.0"
-
-MODULE_AUTHOR(DRV_AUTHOR);
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL");
-
-#define START_STATE	((void *)0)
-#define RUNNING_STATE	((void *)1)
-#define DONE_STATE	((void *)2)
-#define ERROR_STATE	((void *)-1)
-
-struct bfin_spi_master_data;
-
-struct bfin_spi_transfer_ops {
-	void (*write) (struct bfin_spi_master_data *);
-	void (*read) (struct bfin_spi_master_data *);
-	void (*duplex) (struct bfin_spi_master_data *);
-};
-
-struct bfin_spi_master_data {
-	/* Driver model hookup */
-	struct platform_device *pdev;
-
-	/* SPI framework hookup */
-	struct spi_master *master;
-
-	/* Regs base of SPI controller */
-	struct bfin_spi_regs __iomem *regs;
-
-	/* Pin request list */
-	u16 *pin_req;
-
-	/* BFIN hookup */
-	struct bfin5xx_spi_master *master_info;
-
-	struct work_struct pump_messages;
-	spinlock_t lock;
-	struct list_head queue;
-	int busy;
-	bool running;
-
-	/* Message Transfer pump */
-	struct tasklet_struct pump_transfers;
-
-	/* Current message transfer state info */
-	struct spi_message *cur_msg;
-	struct spi_transfer *cur_transfer;
-	struct bfin_spi_slave_data *cur_chip;
-	size_t len_in_bytes;
-	size_t len;
-	void *tx;
-	void *tx_end;
-	void *rx;
-	void *rx_end;
-
-	/* DMA stuffs */
-	int dma_channel;
-	int dma_mapped;
-	int dma_requested;
-	dma_addr_t rx_dma;
-	dma_addr_t tx_dma;
-
-	int irq_requested;
-	int spi_irq;
-
-	size_t rx_map_len;
-	size_t tx_map_len;
-	u8 n_bytes;
-	u16 ctrl_reg;
-	u16 flag_reg;
-
-	int cs_change;
-	const struct bfin_spi_transfer_ops *ops;
-};
-
-struct bfin_spi_slave_data {
-	u16 ctl_reg;
-	u16 baud;
-	u16 flag;
-
-	u8 chip_select_num;
-	u8 enable_dma;
-	u16 cs_chg_udelay;	/* Some devices require > 255usec delay */
-	u32 cs_gpio;
-	u16 idle_tx_val;
-	u8 pio_interrupt;	/* use spi data irq */
-	const struct bfin_spi_transfer_ops *ops;
-};
-
-static void bfin_spi_enable(struct bfin_spi_master_data *drv_data)
-{
-	bfin_write_or(&drv_data->regs->ctl, BIT_CTL_ENABLE);
-}
-
-static void bfin_spi_disable(struct bfin_spi_master_data *drv_data)
-{
-	bfin_write_and(&drv_data->regs->ctl, ~BIT_CTL_ENABLE);
-}
-
-/* Caculate the SPI_BAUD register value based on input HZ */
-static u16 hz_to_spi_baud(u32 speed_hz)
-{
-	u_long sclk = get_sclk();
-	u16 spi_baud = (sclk / (2 * speed_hz));
-
-	if ((sclk % (2 * speed_hz)) > 0)
-		spi_baud++;
-
-	if (spi_baud < MIN_SPI_BAUD_VAL)
-		spi_baud = MIN_SPI_BAUD_VAL;
-
-	return spi_baud;
-}
-
-static int bfin_spi_flush(struct bfin_spi_master_data *drv_data)
-{
-	unsigned long limit = loops_per_jiffy << 1;
-
-	/* wait for stop and clear stat */
-	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF) && --limit)
-		cpu_relax();
-
-	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
-
-	return limit;
-}
-
-/* Chip select operation functions for cs_change flag */
-static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip)
-{
-	if (likely(chip->chip_select_num < MAX_CTRL_CS))
-		bfin_write_and(&drv_data->regs->flg, ~chip->flag);
-	else
-		gpio_set_value(chip->cs_gpio, 0);
-}
-
-static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data,
-                                 struct bfin_spi_slave_data *chip)
-{
-	if (likely(chip->chip_select_num < MAX_CTRL_CS))
-		bfin_write_or(&drv_data->regs->flg, chip->flag);
-	else
-		gpio_set_value(chip->cs_gpio, 1);
-
-	/* Move delay here for consistency */
-	if (chip->cs_chg_udelay)
-		udelay(chip->cs_chg_udelay);
-}
-
-/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
-static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data,
-                                      struct bfin_spi_slave_data *chip)
-{
-	if (chip->chip_select_num < MAX_CTRL_CS)
-		bfin_write_or(&drv_data->regs->flg, chip->flag >> 8);
-}
-
-static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data,
-                                       struct bfin_spi_slave_data *chip)
-{
-	if (chip->chip_select_num < MAX_CTRL_CS)
-		bfin_write_and(&drv_data->regs->flg, ~(chip->flag >> 8));
-}
-
-/* stop controller and re-config current chip*/
-static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data)
-{
-	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
-
-	/* Clear status and disable clock */
-	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
-	bfin_spi_disable(drv_data);
-	dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
-
-	SSYNC();
-
-	/* Load the registers */
-	bfin_write(&drv_data->regs->ctl, chip->ctl_reg);
-	bfin_write(&drv_data->regs->baud, chip->baud);
-
-	bfin_spi_enable(drv_data);
-	bfin_spi_cs_active(drv_data, chip);
-}
-
-/* used to kick off transfer in rx mode and read unwanted RX data */
-static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data)
-{
-	(void) bfin_read(&drv_data->regs->rdbr);
-}
-
-static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data)
-{
-	/* clear RXS (we check for RXS inside the loop) */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++)));
-		/* wait until transfer finished.
-		   checking SPIF or TXS may not guarantee transfer completion */
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		/* discard RX data and clear RXS */
-		bfin_spi_dummy_read(drv_data);
-	}
-}
-
-static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data)
-{
-	u16 tx_val = drv_data->cur_chip->idle_tx_val;
-
-	/* discard old RX data and clear RXS */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tdbr, tx_val);
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		*(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr);
-	}
-}
-
-static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data)
-{
-	/* discard old RX data and clear RXS */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++)));
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		*(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr);
-	}
-}
-
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = {
-	.write  = bfin_spi_u8_writer,
-	.read   = bfin_spi_u8_reader,
-	.duplex = bfin_spi_u8_duplex,
-};
-
-static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data)
-{
-	/* clear RXS (we check for RXS inside the loop) */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->tx < drv_data->tx_end) {
-		bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx)));
-		drv_data->tx += 2;
-		/* wait until transfer finished.
-		   checking SPIF or TXS may not guarantee transfer completion */
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		/* discard RX data and clear RXS */
-		bfin_spi_dummy_read(drv_data);
-	}
-}
-
-static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data)
-{
-	u16 tx_val = drv_data->cur_chip->idle_tx_val;
-
-	/* discard old RX data and clear RXS */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tdbr, tx_val);
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		*(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr);
-		drv_data->rx += 2;
-	}
-}
-
-static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data)
-{
-	/* discard old RX data and clear RXS */
-	bfin_spi_dummy_read(drv_data);
-
-	while (drv_data->rx < drv_data->rx_end) {
-		bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx)));
-		drv_data->tx += 2;
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-			cpu_relax();
-		*(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr);
-		drv_data->rx += 2;
-	}
-}
-
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = {
-	.write  = bfin_spi_u16_writer,
-	.read   = bfin_spi_u16_reader,
-	.duplex = bfin_spi_u16_duplex,
-};
-
-/* test if there is more transfer to be done */
-static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	struct spi_transfer *trans = drv_data->cur_transfer;
-
-	/* Move to next transfer */
-	if (trans->transfer_list.next != &msg->transfers) {
-		drv_data->cur_transfer =
-		    list_entry(trans->transfer_list.next,
-			       struct spi_transfer, transfer_list);
-		return RUNNING_STATE;
-	} else
-		return DONE_STATE;
-}
-
-/*
- * caller already set message->status;
- * dma and pio irqs are blocked give finished message back
- */
-static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data)
-{
-	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
-	unsigned long flags;
-	struct spi_message *msg;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-	msg = drv_data->cur_msg;
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	schedule_work(&drv_data->pump_messages);
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	msg->state = NULL;
-
-	if (!drv_data->cs_change)
-		bfin_spi_cs_deactive(drv_data, chip);
-
-	/* Not stop spi in autobuffer mode */
-	if (drv_data->tx_dma != 0xFFFF)
-		bfin_spi_disable(drv_data);
-
-	if (msg->complete)
-		msg->complete(msg->context);
-}
-
-/* spi data irq handler */
-static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
-{
-	struct bfin_spi_master_data *drv_data = dev_id;
-	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
-	struct spi_message *msg = drv_data->cur_msg;
-	int n_bytes = drv_data->n_bytes;
-	int loop = 0;
-
-	/* wait until transfer finished. */
-	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
-		cpu_relax();
-
-	if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) ||
-		(drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) {
-		/* last read */
-		if (drv_data->rx) {
-			dev_dbg(&drv_data->pdev->dev, "last read\n");
-			if (!(n_bytes % 2)) {
-				u16 *buf = (u16 *)drv_data->rx;
-				for (loop = 0; loop < n_bytes / 2; loop++)
-					*buf++ = bfin_read(&drv_data->regs->rdbr);
-			} else {
-				u8 *buf = (u8 *)drv_data->rx;
-				for (loop = 0; loop < n_bytes; loop++)
-					*buf++ = bfin_read(&drv_data->regs->rdbr);
-			}
-			drv_data->rx += n_bytes;
-		}
-
-		msg->actual_length += drv_data->len_in_bytes;
-		if (drv_data->cs_change)
-			bfin_spi_cs_deactive(drv_data, chip);
-		/* Move to next transfer */
-		msg->state = bfin_spi_next_transfer(drv_data);
-
-		disable_irq_nosync(drv_data->spi_irq);
-
-		/* Schedule transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-		return IRQ_HANDLED;
-	}
-
-	if (drv_data->rx && drv_data->tx) {
-		/* duplex */
-		dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n");
-		if (!(n_bytes % 2)) {
-			u16 *buf = (u16 *)drv_data->rx;
-			u16 *buf2 = (u16 *)drv_data->tx;
-			for (loop = 0; loop < n_bytes / 2; loop++) {
-				*buf++ = bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, *buf2++);
-			}
-		} else {
-			u8 *buf = (u8 *)drv_data->rx;
-			u8 *buf2 = (u8 *)drv_data->tx;
-			for (loop = 0; loop < n_bytes; loop++) {
-				*buf++ = bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, *buf2++);
-			}
-		}
-	} else if (drv_data->rx) {
-		/* read */
-		dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n");
-		if (!(n_bytes % 2)) {
-			u16 *buf = (u16 *)drv_data->rx;
-			for (loop = 0; loop < n_bytes / 2; loop++) {
-				*buf++ = bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
-			}
-		} else {
-			u8 *buf = (u8 *)drv_data->rx;
-			for (loop = 0; loop < n_bytes; loop++) {
-				*buf++ = bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
-			}
-		}
-	} else if (drv_data->tx) {
-		/* write */
-		dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n");
-		if (!(n_bytes % 2)) {
-			u16 *buf = (u16 *)drv_data->tx;
-			for (loop = 0; loop < n_bytes / 2; loop++) {
-				bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, *buf++);
-			}
-		} else {
-			u8 *buf = (u8 *)drv_data->tx;
-			for (loop = 0; loop < n_bytes; loop++) {
-				bfin_read(&drv_data->regs->rdbr);
-				bfin_write(&drv_data->regs->tdbr, *buf++);
-			}
-		}
-	}
-
-	if (drv_data->tx)
-		drv_data->tx += n_bytes;
-	if (drv_data->rx)
-		drv_data->rx += n_bytes;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
-{
-	struct bfin_spi_master_data *drv_data = dev_id;
-	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
-	struct spi_message *msg = drv_data->cur_msg;
-	unsigned long timeout;
-	unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel);
-	u16 spistat = bfin_read(&drv_data->regs->stat);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
-		dmastat, spistat);
-
-	if (drv_data->rx != NULL) {
-		u16 cr = bfin_read(&drv_data->regs->ctl);
-		/* discard old RX data and clear RXS */
-		bfin_spi_dummy_read(drv_data);
-		bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_ENABLE); /* Disable SPI */
-		bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_TIMOD); /* Restore State */
-		bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); /* Clear Status */
-	}
-
-	clear_dma_irqstat(drv_data->dma_channel);
-
-	/*
-	 * wait for the last transaction shifted out.  HRM states:
-	 * at this point there may still be data in the SPI DMA FIFO waiting
-	 * to be transmitted ... software needs to poll TXS in the SPI_STAT
-	 * register until it goes low for 2 successive reads
-	 */
-	if (drv_data->tx != NULL) {
-		while ((bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS) ||
-		       (bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS))
-			cpu_relax();
-	}
-
-	dev_dbg(&drv_data->pdev->dev,
-		"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
-		dmastat, bfin_read(&drv_data->regs->stat));
-
-	timeout = jiffies + HZ;
-	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
-		if (!time_before(jiffies, timeout)) {
-			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
-			break;
-		} else
-			cpu_relax();
-
-	if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) {
-		msg->state = ERROR_STATE;
-		dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n");
-	} else {
-		msg->actual_length += drv_data->len_in_bytes;
-
-		if (drv_data->cs_change)
-			bfin_spi_cs_deactive(drv_data, chip);
-
-		/* Move to next transfer */
-		msg->state = bfin_spi_next_transfer(drv_data);
-	}
-
-	/* Schedule transfer tasklet */
-	tasklet_schedule(&drv_data->pump_transfers);
-
-	/* free the irq handler before next transfer */
-	dev_dbg(&drv_data->pdev->dev,
-		"disable dma channel irq%d\n",
-		drv_data->dma_channel);
-	dma_disable_irq_nosync(drv_data->dma_channel);
-
-	return IRQ_HANDLED;
-}
-
-static void bfin_spi_pump_transfers(unsigned long data)
-{
-	struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data;
-	struct spi_message *message = NULL;
-	struct spi_transfer *transfer = NULL;
-	struct spi_transfer *previous = NULL;
-	struct bfin_spi_slave_data *chip = NULL;
-	unsigned int bits_per_word;
-	u16 cr, cr_width = 0, dma_width, dma_config;
-	u32 tranf_success = 1;
-	u8 full_duplex = 0;
-
-	/* Get current state information */
-	message = drv_data->cur_msg;
-	transfer = drv_data->cur_transfer;
-	chip = drv_data->cur_chip;
-
-	/*
-	 * if msg is error or done, report it back using complete() callback
-	 */
-
-	 /* Handle for abort */
-	if (message->state == ERROR_STATE) {
-		dev_dbg(&drv_data->pdev->dev, "transfer: we've hit an error\n");
-		message->status = -EIO;
-		bfin_spi_giveback(drv_data);
-		return;
-	}
-
-	/* Handle end of message */
-	if (message->state == DONE_STATE) {
-		dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n");
-		message->status = 0;
-		bfin_spi_flush(drv_data);
-		bfin_spi_giveback(drv_data);
-		return;
-	}
-
-	/* Delay if requested at end of transfer */
-	if (message->state == RUNNING_STATE) {
-		dev_dbg(&drv_data->pdev->dev, "transfer: still running ...\n");
-		previous = list_entry(transfer->transfer_list.prev,
-				      struct spi_transfer, transfer_list);
-		if (previous->delay_usecs)
-			udelay(previous->delay_usecs);
-	}
-
-	/* Flush any existing transfers that may be sitting in the hardware */
-	if (bfin_spi_flush(drv_data) == 0) {
-		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
-		message->status = -EIO;
-		bfin_spi_giveback(drv_data);
-		return;
-	}
-
-	if (transfer->len == 0) {
-		/* Move to next transfer of this msg */
-		message->state = bfin_spi_next_transfer(drv_data);
-		/* Schedule next transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-		return;
-	}
-
-	if (transfer->tx_buf != NULL) {
-		drv_data->tx = (void *)transfer->tx_buf;
-		drv_data->tx_end = drv_data->tx + transfer->len;
-		dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n",
-			transfer->tx_buf, drv_data->tx_end);
-	} else {
-		drv_data->tx = NULL;
-	}
-
-	if (transfer->rx_buf != NULL) {
-		full_duplex = transfer->tx_buf != NULL;
-		drv_data->rx = transfer->rx_buf;
-		drv_data->rx_end = drv_data->rx + transfer->len;
-		dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
-			transfer->rx_buf, drv_data->rx_end);
-	} else {
-		drv_data->rx = NULL;
-	}
-
-	drv_data->rx_dma = transfer->rx_dma;
-	drv_data->tx_dma = transfer->tx_dma;
-	drv_data->len_in_bytes = transfer->len;
-	drv_data->cs_change = transfer->cs_change;
-
-	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word;
-	if (bits_per_word == 16) {
-		drv_data->n_bytes = bits_per_word/8;
-		drv_data->len = (transfer->len) >> 1;
-		cr_width = BIT_CTL_WORDSIZE;
-		drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
-	} else if (bits_per_word == 8) {
-		drv_data->n_bytes = bits_per_word/8;
-		drv_data->len = transfer->len;
-		drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
-	}
-	cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);
-	cr |= cr_width;
-	bfin_write(&drv_data->regs->ctl, cr);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n",
-		drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8);
-
-	message->state = RUNNING_STATE;
-	dma_config = 0;
-
-	bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
-
-	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
-	bfin_spi_cs_active(drv_data, chip);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"now pumping a transfer: width is %d, len is %d\n",
-		cr_width, transfer->len);
-
-	/*
-	 * Try to map dma buffer and do a dma transfer.  If successful use,
-	 * different way to r/w according to the enable_dma settings and if
-	 * we are not doing a full duplex transfer (since the hardware does
-	 * not support full duplex DMA transfers).
-	 */
-	if (!full_duplex && drv_data->cur_chip->enable_dma
-				&& drv_data->len > 6) {
-
-		unsigned long dma_start_addr, flags;
-
-		disable_dma(drv_data->dma_channel);
-		clear_dma_irqstat(drv_data->dma_channel);
-
-		/* config dma channel */
-		dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
-		set_dma_x_count(drv_data->dma_channel, drv_data->len);
-		if (cr_width == BIT_CTL_WORDSIZE) {
-			set_dma_x_modify(drv_data->dma_channel, 2);
-			dma_width = WDSIZE_16;
-		} else {
-			set_dma_x_modify(drv_data->dma_channel, 1);
-			dma_width = WDSIZE_8;
-		}
-
-		/* poll for SPI completion before start */
-		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
-			cpu_relax();
-
-		/* dirty hack for autobuffer DMA mode */
-		if (drv_data->tx_dma == 0xFFFF) {
-			dev_dbg(&drv_data->pdev->dev,
-				"doing autobuffer DMA out.\n");
-
-			/* no irq in autobuffer mode */
-			dma_config =
-			    (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
-			set_dma_config(drv_data->dma_channel, dma_config);
-			set_dma_start_addr(drv_data->dma_channel,
-					(unsigned long)drv_data->tx);
-			enable_dma(drv_data->dma_channel);
-
-			/* start SPI transfer */
-			bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TIMOD_DMA_TX);
-
-			/* just return here, there can only be one transfer
-			 * in this mode
-			 */
-			message->status = 0;
-			bfin_spi_giveback(drv_data);
-			return;
-		}
-
-		/* In dma mode, rx or tx must be NULL in one transfer */
-		dma_config = (RESTART | dma_width | DI_EN);
-		if (drv_data->rx != NULL) {
-			/* set transfer mode, and enable SPI */
-			dev_dbg(&drv_data->pdev->dev, "doing DMA in to %p (size %zx)\n",
-				drv_data->rx, drv_data->len_in_bytes);
-
-			/* invalidate caches, if needed */
-			if (bfin_addr_dcacheable((unsigned long) drv_data->rx))
-				invalidate_dcache_range((unsigned long) drv_data->rx,
-							(unsigned long) (drv_data->rx +
-							drv_data->len_in_bytes));
-
-			dma_config |= WNR;
-			dma_start_addr = (unsigned long)drv_data->rx;
-			cr |= BIT_CTL_TIMOD_DMA_RX | BIT_CTL_SENDOPT;
-
-		} else if (drv_data->tx != NULL) {
-			dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
-
-			/* flush caches, if needed */
-			if (bfin_addr_dcacheable((unsigned long) drv_data->tx))
-				flush_dcache_range((unsigned long) drv_data->tx,
-						(unsigned long) (drv_data->tx +
-						drv_data->len_in_bytes));
-
-			dma_start_addr = (unsigned long)drv_data->tx;
-			cr |= BIT_CTL_TIMOD_DMA_TX;
-
-		} else
-			BUG();
-
-		/* oh man, here there be monsters ... and i dont mean the
-		 * fluffy cute ones from pixar, i mean the kind that'll eat
-		 * your data, kick your dog, and love it all.  do *not* try
-		 * and change these lines unless you (1) heavily test DMA
-		 * with SPI flashes on a loaded system (e.g. ping floods),
-		 * (2) know just how broken the DMA engine interaction with
-		 * the SPI peripheral is, and (3) have someone else to blame
-		 * when you screw it all up anyways.
-		 */
-		set_dma_start_addr(drv_data->dma_channel, dma_start_addr);
-		set_dma_config(drv_data->dma_channel, dma_config);
-		local_irq_save(flags);
-		SSYNC();
-		bfin_write(&drv_data->regs->ctl, cr);
-		enable_dma(drv_data->dma_channel);
-		dma_enable_irq(drv_data->dma_channel);
-		local_irq_restore(flags);
-
-		return;
-	}
-
-	/*
-	 * We always use SPI_WRITE mode (transfer starts with TDBR write).
-	 * SPI_READ mode (transfer starts with RDBR read) seems to have
-	 * problems with setting up the output value in TDBR prior to the
-	 * start of the transfer.
-	 */
-	bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TXMOD);
-
-	if (chip->pio_interrupt) {
-		/* SPI irq should have been disabled by now */
-
-		/* discard old RX data and clear RXS */
-		bfin_spi_dummy_read(drv_data);
-
-		/* start transfer */
-		if (drv_data->tx == NULL)
-			bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
-		else {
-			int loop;
-			if (bits_per_word == 16) {
-				u16 *buf = (u16 *)drv_data->tx;
-				for (loop = 0; loop < bits_per_word / 16;
-						loop++) {
-					bfin_write(&drv_data->regs->tdbr, *buf++);
-				}
-			} else if (bits_per_word == 8) {
-				u8 *buf = (u8 *)drv_data->tx;
-				for (loop = 0; loop < bits_per_word / 8; loop++)
-					bfin_write(&drv_data->regs->tdbr, *buf++);
-			}
-
-			drv_data->tx += drv_data->n_bytes;
-		}
-
-		/* once TDBR is empty, interrupt is triggered */
-		enable_irq(drv_data->spi_irq);
-		return;
-	}
-
-	/* IO mode */
-	dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
-
-	if (full_duplex) {
-		/* full duplex mode */
-		BUG_ON((drv_data->tx_end - drv_data->tx) !=
-		       (drv_data->rx_end - drv_data->rx));
-		dev_dbg(&drv_data->pdev->dev,
-			"IO duplex: cr is 0x%x\n", cr);
-
-		drv_data->ops->duplex(drv_data);
-
-		if (drv_data->tx != drv_data->tx_end)
-			tranf_success = 0;
-	} else if (drv_data->tx != NULL) {
-		/* write only half duplex */
-		dev_dbg(&drv_data->pdev->dev,
-			"IO write: cr is 0x%x\n", cr);
-
-		drv_data->ops->write(drv_data);
-
-		if (drv_data->tx != drv_data->tx_end)
-			tranf_success = 0;
-	} else if (drv_data->rx != NULL) {
-		/* read only half duplex */
-		dev_dbg(&drv_data->pdev->dev,
-			"IO read: cr is 0x%x\n", cr);
-
-		drv_data->ops->read(drv_data);
-		if (drv_data->rx != drv_data->rx_end)
-			tranf_success = 0;
-	}
-
-	if (!tranf_success) {
-		dev_dbg(&drv_data->pdev->dev,
-			"IO write error!\n");
-		message->state = ERROR_STATE;
-	} else {
-		/* Update total byte transferred */
-		message->actual_length += drv_data->len_in_bytes;
-		/* Move to next transfer of this msg */
-		message->state = bfin_spi_next_transfer(drv_data);
-		if (drv_data->cs_change && message->state != DONE_STATE) {
-			bfin_spi_flush(drv_data);
-			bfin_spi_cs_deactive(drv_data, chip);
-		}
-	}
-
-	/* Schedule next transfer tasklet */
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-/* pop a msg from queue and kick off real transfer */
-static void bfin_spi_pump_messages(struct work_struct *work)
-{
-	struct bfin_spi_master_data *drv_data;
-	unsigned long flags;
-
-	drv_data = container_of(work, struct bfin_spi_master_data, pump_messages);
-
-	/* Lock queue and check for queue work */
-	spin_lock_irqsave(&drv_data->lock, flags);
-	if (list_empty(&drv_data->queue) || !drv_data->running) {
-		/* pumper kicked off but no work to do */
-		drv_data->busy = 0;
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Make sure we are not already running a message */
-	if (drv_data->cur_msg) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Extract head of queue */
-	drv_data->cur_msg = list_entry(drv_data->queue.next,
-				       struct spi_message, queue);
-
-	/* Setup the SSP using the per chip configuration */
-	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-	bfin_spi_restore_state(drv_data);
-
-	list_del_init(&drv_data->cur_msg->queue);
-
-	/* Initial message state */
-	drv_data->cur_msg->state = START_STATE;
-	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-					    struct spi_transfer, transfer_list);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"got a message to pump, state is set to: baud "
-		"%d, flag 0x%x, ctl 0x%x\n",
-		drv_data->cur_chip->baud, drv_data->cur_chip->flag,
-		drv_data->cur_chip->ctl_reg);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"the first transfer len is %d\n",
-		drv_data->cur_transfer->len);
-
-	/* Mark as busy and launch transfers */
-	tasklet_schedule(&drv_data->pump_transfers);
-
-	drv_data->busy = 1;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-}
-
-/*
- * got a msg to transfer, queue it in drv_data->queue.
- * And kick off message pumper
- */
-static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-{
-	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (!drv_data->running) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -ESHUTDOWN;
-	}
-
-	msg->actual_length = 0;
-	msg->status = -EINPROGRESS;
-	msg->state = START_STATE;
-
-	dev_dbg(&spi->dev, "adding an msg in transfer() \n");
-	list_add_tail(&msg->queue, &drv_data->queue);
-
-	if (drv_data->running && !drv_data->busy)
-		schedule_work(&drv_data->pump_messages);
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	return 0;
-}
-
-#define MAX_SPI_SSEL	7
-
-static const u16 ssel[][MAX_SPI_SSEL] = {
-	{P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
-	P_SPI0_SSEL4, P_SPI0_SSEL5,
-	P_SPI0_SSEL6, P_SPI0_SSEL7},
-
-	{P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
-	P_SPI1_SSEL4, P_SPI1_SSEL5,
-	P_SPI1_SSEL6, P_SPI1_SSEL7},
-
-	{P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
-	P_SPI2_SSEL4, P_SPI2_SSEL5,
-	P_SPI2_SSEL6, P_SPI2_SSEL7},
-};
-
-/* setup for devices (may be called multiple times -- not just first setup) */
-static int bfin_spi_setup(struct spi_device *spi)
-{
-	struct bfin5xx_spi_chip *chip_info;
-	struct bfin_spi_slave_data *chip = NULL;
-	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
-	u16 bfin_ctl_reg;
-	int ret = -EINVAL;
-
-	/* Only alloc (or use chip_info) on first setup */
-	chip_info = NULL;
-	chip = spi_get_ctldata(spi);
-	if (chip == NULL) {
-		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-		if (!chip) {
-			dev_err(&spi->dev, "cannot allocate chip data\n");
-			ret = -ENOMEM;
-			goto error;
-		}
-
-		chip->enable_dma = 0;
-		chip_info = spi->controller_data;
-	}
-
-	/* Let people set non-standard bits directly */
-	bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO |
-		BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ;
-
-	/* chip_info isn't always needed */
-	if (chip_info) {
-		/* Make sure people stop trying to set fields via ctl_reg
-		 * when they should actually be using common SPI framework.
-		 * Currently we let through: WOM EMISO PSSE GM SZ.
-		 * Not sure if a user actually needs/uses any of these,
-		 * but let's assume (for now) they do.
-		 */
-		if (chip_info->ctl_reg & ~bfin_ctl_reg) {
-			dev_err(&spi->dev,
-				"do not set bits in ctl_reg that the SPI framework manages\n");
-			goto error;
-		}
-		chip->enable_dma = chip_info->enable_dma != 0
-		    && drv_data->master_info->enable_dma;
-		chip->ctl_reg = chip_info->ctl_reg;
-		chip->cs_chg_udelay = chip_info->cs_chg_udelay;
-		chip->idle_tx_val = chip_info->idle_tx_val;
-		chip->pio_interrupt = chip_info->pio_interrupt;
-	} else {
-		/* force a default base state */
-		chip->ctl_reg &= bfin_ctl_reg;
-	}
-
-	/* translate common spi framework into our register */
-	if (spi->mode & SPI_CPOL)
-		chip->ctl_reg |= BIT_CTL_CPOL;
-	if (spi->mode & SPI_CPHA)
-		chip->ctl_reg |= BIT_CTL_CPHA;
-	if (spi->mode & SPI_LSB_FIRST)
-		chip->ctl_reg |= BIT_CTL_LSBF;
-	/* we dont support running in slave mode (yet?) */
-	chip->ctl_reg |= BIT_CTL_MASTER;
-
-	/*
-	 * Notice: for blackfin, the speed_hz is the value of register
-	 * SPI_BAUD, not the real baudrate
-	 */
-	chip->baud = hz_to_spi_baud(spi->max_speed_hz);
-	chip->chip_select_num = spi->chip_select;
-	if (chip->chip_select_num < MAX_CTRL_CS) {
-		if (!(spi->mode & SPI_CPHA))
-			dev_warn(&spi->dev,
-				"Warning: SPI CPHA not set: Slave Select not under software control!\n"
-				"See Documentation/blackfin/bfin-spi-notes.txt\n");
-
-		chip->flag = (1 << spi->chip_select) << 8;
-	} else
-		chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
-
-	if (chip->enable_dma && chip->pio_interrupt) {
-		dev_err(&spi->dev,
-			"enable_dma is set, do not set pio_interrupt\n");
-		goto error;
-	}
-	/*
-	 * if any one SPI chip is registered and wants DMA, request the
-	 * DMA channel for it
-	 */
-	if (chip->enable_dma && !drv_data->dma_requested) {
-		/* register dma irq handler */
-		ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA");
-		if (ret) {
-			dev_err(&spi->dev,
-				"Unable to request BlackFin SPI DMA channel\n");
-			goto error;
-		}
-		drv_data->dma_requested = 1;
-
-		ret = set_dma_callback(drv_data->dma_channel,
-			bfin_spi_dma_irq_handler, drv_data);
-		if (ret) {
-			dev_err(&spi->dev, "Unable to set dma callback\n");
-			goto error;
-		}
-		dma_disable_irq(drv_data->dma_channel);
-	}
-
-	if (chip->pio_interrupt && !drv_data->irq_requested) {
-		ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler,
-			0, "BFIN_SPI", drv_data);
-		if (ret) {
-			dev_err(&spi->dev, "Unable to register spi IRQ\n");
-			goto error;
-		}
-		drv_data->irq_requested = 1;
-		/* we use write mode, spi irq has to be disabled here */
-		disable_irq(drv_data->spi_irq);
-	}
-
-	if (chip->chip_select_num >= MAX_CTRL_CS) {
-		/* Only request on first setup */
-		if (spi_get_ctldata(spi) == NULL) {
-			ret = gpio_request(chip->cs_gpio, spi->modalias);
-			if (ret) {
-				dev_err(&spi->dev, "gpio_request() error\n");
-				goto pin_error;
-			}
-			gpio_direction_output(chip->cs_gpio, 1);
-		}
-	}
-
-	dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",
-			spi->modalias, spi->bits_per_word, chip->enable_dma);
-	dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
-			chip->ctl_reg, chip->flag);
-
-	spi_set_ctldata(spi, chip);
-
-	dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
-	if (chip->chip_select_num < MAX_CTRL_CS) {
-		ret = peripheral_request(ssel[spi->master->bus_num]
-		                         [chip->chip_select_num-1], spi->modalias);
-		if (ret) {
-			dev_err(&spi->dev, "peripheral_request() error\n");
-			goto pin_error;
-		}
-	}
-
-	bfin_spi_cs_enable(drv_data, chip);
-	bfin_spi_cs_deactive(drv_data, chip);
-
-	return 0;
-
- pin_error:
-	if (chip->chip_select_num >= MAX_CTRL_CS)
-		gpio_free(chip->cs_gpio);
-	else
-		peripheral_free(ssel[spi->master->bus_num]
-			[chip->chip_select_num - 1]);
- error:
-	if (chip) {
-		if (drv_data->dma_requested)
-			free_dma(drv_data->dma_channel);
-		drv_data->dma_requested = 0;
-
-		kfree(chip);
-		/* prevent free 'chip' twice */
-		spi_set_ctldata(spi, NULL);
-	}
-
-	return ret;
-}
-
-/*
- * callback for spi framework.
- * clean driver specific data
- */
-static void bfin_spi_cleanup(struct spi_device *spi)
-{
-	struct bfin_spi_slave_data *chip = spi_get_ctldata(spi);
-	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
-
-	if (!chip)
-		return;
-
-	if (chip->chip_select_num < MAX_CTRL_CS) {
-		peripheral_free(ssel[spi->master->bus_num]
-					[chip->chip_select_num-1]);
-		bfin_spi_cs_disable(drv_data, chip);
-	} else
-		gpio_free(chip->cs_gpio);
-
-	kfree(chip);
-	/* prevent free 'chip' twice */
-	spi_set_ctldata(spi, NULL);
-}
-
-static int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data)
-{
-	INIT_LIST_HEAD(&drv_data->queue);
-	spin_lock_init(&drv_data->lock);
-
-	drv_data->running = false;
-	drv_data->busy = 0;
-
-	/* init transfer tasklet */
-	tasklet_init(&drv_data->pump_transfers,
-		     bfin_spi_pump_transfers, (unsigned long)drv_data);
-
-	INIT_WORK(&drv_data->pump_messages, bfin_spi_pump_messages);
-
-	return 0;
-}
-
-static int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (drv_data->running || drv_data->busy) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -EBUSY;
-	}
-
-	drv_data->running = true;
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	schedule_work(&drv_data->pump_messages);
-
-	return 0;
-}
-
-static int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data)
-{
-	unsigned long flags;
-	unsigned limit = 500;
-	int status = 0;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	/*
-	 * This is a bit lame, but is optimized for the common execution path.
-	 * A wait_queue on the drv_data->busy could be used, but then the common
-	 * execution path (pump_messages) would be required to call wake_up or
-	 * friends on every SPI message. Do this instead
-	 */
-	drv_data->running = false;
-	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		msleep(10);
-		spin_lock_irqsave(&drv_data->lock, flags);
-	}
-
-	if (!list_empty(&drv_data->queue) || drv_data->busy)
-		status = -EBUSY;
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	return status;
-}
-
-static int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data)
-{
-	int status;
-
-	status = bfin_spi_stop_queue(drv_data);
-	if (status != 0)
-		return status;
-
-	flush_work(&drv_data->pump_messages);
-
-	return 0;
-}
-
-static int bfin_spi_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct bfin5xx_spi_master *platform_info;
-	struct spi_master *master;
-	struct bfin_spi_master_data *drv_data;
-	struct resource *res;
-	int status = 0;
-
-	platform_info = dev_get_platdata(dev);
-
-	/* Allocate master with space for drv_data */
-	master = spi_alloc_master(dev, sizeof(*drv_data));
-	if (!master) {
-		dev_err(&pdev->dev, "can not alloc spi_master\n");
-		return -ENOMEM;
-	}
-
-	drv_data = spi_master_get_devdata(master);
-	drv_data->master = master;
-	drv_data->master_info = platform_info;
-	drv_data->pdev = pdev;
-	drv_data->pin_req = platform_info->pin_req;
-
-	/* the spi->mode bits supported by this driver: */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
-	master->bus_num = pdev->id;
-	master->num_chipselect = platform_info->num_chipselect;
-	master->cleanup = bfin_spi_cleanup;
-	master->setup = bfin_spi_setup;
-	master->transfer = bfin_spi_transfer;
-
-	/* Find and map our resources */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(dev, "Cannot get IORESOURCE_MEM\n");
-		status = -ENOENT;
-		goto out_error_get_res;
-	}
-
-	drv_data->regs = ioremap(res->start, resource_size(res));
-	if (drv_data->regs == NULL) {
-		dev_err(dev, "Cannot map IO\n");
-		status = -ENXIO;
-		goto out_error_ioremap;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (res == NULL) {
-		dev_err(dev, "No DMA channel specified\n");
-		status = -ENOENT;
-		goto out_error_free_io;
-	}
-	drv_data->dma_channel = res->start;
-
-	drv_data->spi_irq = platform_get_irq(pdev, 0);
-	if (drv_data->spi_irq < 0) {
-		dev_err(dev, "No spi pio irq specified\n");
-		status = -ENOENT;
-		goto out_error_free_io;
-	}
-
-	/* Initial and start queue */
-	status = bfin_spi_init_queue(drv_data);
-	if (status != 0) {
-		dev_err(dev, "problem initializing queue\n");
-		goto out_error_queue_alloc;
-	}
-
-	status = bfin_spi_start_queue(drv_data);
-	if (status != 0) {
-		dev_err(dev, "problem starting queue\n");
-		goto out_error_queue_alloc;
-	}
-
-	status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
-	if (status != 0) {
-		dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
-		goto out_error_queue_alloc;
-	}
-
-	/* Reset SPI registers. If these registers were used by the boot loader,
-	 * the sky may fall on your head if you enable the dma controller.
-	 */
-	bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER);
-	bfin_write(&drv_data->regs->flg, 0xFF00);
-
-	/* Register with the SPI framework */
-	platform_set_drvdata(pdev, drv_data);
-	status = spi_register_master(master);
-	if (status != 0) {
-		dev_err(dev, "problem registering spi master\n");
-		goto out_error_queue_alloc;
-	}
-
-	dev_info(dev, "%s, Version %s, regs@%p, dma channel@%d\n",
-		DRV_DESC, DRV_VERSION, drv_data->regs,
-		drv_data->dma_channel);
-	return status;
-
-out_error_queue_alloc:
-	bfin_spi_destroy_queue(drv_data);
-out_error_free_io:
-	iounmap(drv_data->regs);
-out_error_ioremap:
-out_error_get_res:
-	spi_master_put(master);
-
-	return status;
-}
-
-/* stop hardware and remove the driver */
-static int bfin_spi_remove(struct platform_device *pdev)
-{
-	struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
-	int status = 0;
-
-	if (!drv_data)
-		return 0;
-
-	/* Remove the queue */
-	status = bfin_spi_destroy_queue(drv_data);
-	if (status != 0)
-		return status;
-
-	/* Disable the SSP at the peripheral and SOC level */
-	bfin_spi_disable(drv_data);
-
-	/* Release DMA */
-	if (drv_data->master_info->enable_dma) {
-		if (dma_channel_active(drv_data->dma_channel))
-			free_dma(drv_data->dma_channel);
-	}
-
-	if (drv_data->irq_requested) {
-		free_irq(drv_data->spi_irq, drv_data);
-		drv_data->irq_requested = 0;
-	}
-
-	/* Disconnect from the SPI framework */
-	spi_unregister_master(drv_data->master);
-
-	peripheral_free_list(drv_data->pin_req);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int bfin_spi_suspend(struct device *dev)
-{
-	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
-	int status = 0;
-
-	status = bfin_spi_stop_queue(drv_data);
-	if (status != 0)
-		return status;
-
-	drv_data->ctrl_reg = bfin_read(&drv_data->regs->ctl);
-	drv_data->flag_reg = bfin_read(&drv_data->regs->flg);
-
-	/*
-	 * reset SPI_CTL and SPI_FLG registers
-	 */
-	bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER);
-	bfin_write(&drv_data->regs->flg, 0xFF00);
-
-	return 0;
-}
-
-static int bfin_spi_resume(struct device *dev)
-{
-	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
-	int status = 0;
-
-	bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg);
-	bfin_write(&drv_data->regs->flg, drv_data->flag_reg);
-
-	/* Start the queue running */
-	status = bfin_spi_start_queue(drv_data);
-	if (status != 0) {
-		dev_err(dev, "problem starting queue (%d)\n", status);
-		return status;
-	}
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_spi_pm_ops, bfin_spi_suspend, bfin_spi_resume);
-
-#define BFIN_SPI_PM_OPS		(&bfin_spi_pm_ops)
-#else
-#define BFIN_SPI_PM_OPS		NULL
-#endif
-
-MODULE_ALIAS("platform:bfin-spi");
-static struct platform_driver bfin_spi_driver = {
-	.driver	= {
-		.name	= DRV_NAME,
-		.pm	= BFIN_SPI_PM_OPS,
-	},
-	.probe		= bfin_spi_probe,
-	.remove		= bfin_spi_remove,
-};
-
-static int __init bfin_spi_init(void)
-{
-	return platform_driver_register(&bfin_spi_driver);
-}
-subsys_initcall(bfin_spi_init);
-
-static void __exit bfin_spi_exit(void)
-{
-	platform_driver_unregister(&bfin_spi_driver);
-}
-module_exit(bfin_spi_exit);
-- 
2.7.4