On Tue, Apr 4, 2017 at 4:00 PM, Wesley Terpstra <wesley@xxxxxxxxxx> wrote: >> Yeah, everything seems mostly working. The "invalid BAR" things >> *could* be an issue -- those registers are not what the PCI spec says >> they should be. > > The devices in question are: > 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) > 06:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe > SATA 6Gb/s Controller (rev 11) > > I am going to plug them in to an Intel machine with 4.11 and see if I > get the same warnings. What the devil! I just booted the riscv machine again and the "Firmware Bug" warnings were gone. All the other warnings remain the same. I've tried to reproduce it, but I can't. It's possible that I got the cards into a bad state from reprogramming my FPGA repeatedly with sometimes bad firmware. After the cold start that made the warnings go away, I can't get them back. I'm going to chalk those warnings up to "only happens when exposed to a bad processor image". Thanks again for your help.
