On Tue, Aug 23, 2016 at 11:26:33AM +1000, Nicholas Piggin wrote:
> On Fri, 19 Aug 2016 14:34:02 -0700
> mcgrof@xxxxxxxxxx wrote:
> > +/**
> > + * DOC: Standard ELF section use in Linux
> > + *
> > + * Linux makes use of the standard ELF sections, this sections documents
> > + * these.
> > + */
> > +
> > +/**
> > + * DOC: SECTION_RODATA
> > + *
> > + * Macro name for code which must be protected from write access, read only
> > + * data.
> > + */
> > +#define SECTION_RODATA .rodata
>
> These, for example. The exact name of the section is important in linker
> scripts and asm, so I can't see the benefit of hiding it. I could be
> missing the bigger picture.
There's two goals by using a macro for these core names. One is to allow us
to easily aggregate documentation in central place for each, the second is
to then provide more easily grep'able helpers so we can use them when devising
extensions or using them in extensions which further customize the sections
in the kernel.
> > +/**
> > + * DOC: SECTION_TEXT
> > + *
> > + * Macro name used to annotate code (functions) used during regular
> > + * kernel run time. This is combined with `SECTION_RODATA`, only this
> > + * section also allows for execution.
> > + *
> > + */
> > +#define SECTION_TEXT .text
>
> I can't see how these comments are right. .rodata doesn't seem like it
> should be combined with .text, and is not currently on powerpc. I think
> it's for data, not code.
On x86 and powerpc .rodata follows .text. On power currently the comment
above in .rodata is:
/* Text, read only data and other permanent read-only sections */
When this was introduced however read commit 14cf11af6cf60 ("powerpc: Merge
enough to start building in arch/powerpc.")
/* Read-only sections, merged into text segment: */
The format and style of putting rodata after text is kept from the older
commits.
This begs the question. What the hell is this thing talking about?
On Linux this is done via mark_rodata_ro() on init/main.c when CONFIG_DEBUG_RODATA
on architectures that support it. Architectures that implement this typically use
issues set_memory_ro() -- on x86 a start address used is PFN_ALIGN(_text) with
an end address of &__end_rodata_hpage_align.
When architectures do not have CONFIG_DEBUG_RODATA() you end up with:
static inline void mark_readonly(void)
{
pr_warn("This architecture does not have kernel memory protection.\n");
}
So -- I should I clarify then in Linux we strive to have helpers adjust text and
rodata set to ro with memory protection implemented via mark_readonly(). Architectures
that do not support memory protection will lack a mark_readonly() implementation.
For now I figured a less controversial introduction to the documentation as
bland as it was above in my original patch would suffice, we can then expand on
it with something like the above. Thoughts?
> > +/*
> > + * These section _ALL() helpers are for use on linker scripts and helpers
> > + */
> > +#define SECTION_ALL(__section) \
> > + __section##.*
>
> This is another example. We know what .text.* does in the linker scripts
> -- it's self documenting. But SECTION_ALL(.text)? I'm not sure that's an
> improvement. Actually I saw it in the linker script changes and had to
> come find the definition because I was a bit mislead:
>
> SECTION_ALL(.text)
>
> Initially I would expect this to be
>
> .text*
>
> Not
>
> .text.*
>
> The latter does not grab the .text section!
Its not intended to grab .text but rather its for helpers that provide customizations
based on a core section as base, in this case given your example it would be used by
section ranges and linker tables for .text. Both section ranges and linker tables
use postfix .something for their customizations. The SECTION_ALL() macro then is
a helper for customizations on a core section.
If the name is misleading would SECTION_CORE_ALL() be better with some documentation
explaining this and the above goal ?
> > +/*
> > + * As per gcc's documentation a common asm separator is a new line followed
> > + * by tab [0], it however seems possible to also just use a newline as its
> > + * the most commonly empirically observed semantic and folks seem to agree
> > + * this even works on S390. In case your architecture disagrees you may
> > + * override this and define your own and keep the rest of the macros.
> > + *
> > + * [0] https://gcc.gnu.org/onlinedocs/gcc/Basic-Asm.html#Basic-Asm
> > + */
> > +# ifndef ASM_CMD_SEP
> > +# define ASM_CMD_SEP "\n"
> > +# endif
>
> This does not seem like it belongs here. The name is fairly ugly too.
Help me bikeshed, any name suggestions?
> I guess something might be needed like this when dealing with generic
> as directives common to all architectures, though.
Indeed, it actually seems we don't have much in this area, so this is small
baby step in that direction.
> I would say include/asm-generic/asm.h should be a better place.
I thought about this -- I'd be adding a new asm-generic/asm.h -- are folks OK
with that right now? Or should we do that as a secondary step ? I preferred to
do this as a secondary step as this series is long enough already and there is
quite a bit that can be dumped in a common asm-generic/asm.h, a few thoughts
on this already:
o x86's asm/asm.h's use of __ASM_FORM() and include/linux/stringify.h share
some traits which deserve possible consideration / rebranding.
o Since C asm() just wrap things in strings defining a core set of
helpers for a task seems justifiable, so for example we have
__set_section_core_type(). Raw asm code then would use __set_section_core_type()
directly and C asm() would just __stringify() it.
I figured a bit of bikeshedding would be possible here, so I decided to leave
this for a later set of patches. But indeed, I agree with you. If we want
this meshed out now.. let me know and lets bikeshed away...
> > diff --git a/include/linux/sections.h b/include/linux/sections.h
> > new file mode 100644
> > index 000000000000..f21c6ee88ded
> > --- /dev/null
> > +++ b/include/linux/sections.h
> > @@ -0,0 +1,111 @@
> > +#ifndef _LINUX_SECTIONS_H
> > +#define _LINUX_SECTIONS_H
> > +/*
> > + * Linux de-facto sections
> > + *
> > + * Copyright (C) 2016 Luis R. Rodriguez <mcgrof@xxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of copyleft-next (version 0.3.1 or later) as published
> > + * at http://copyleft-next.org/.
> > + */
> > +
> > +#include <asm/section-core.h>
> > +#include <linux/export.h>
> > +
> > +#ifndef __ASSEMBLY__
> > +
> > +/**
> > + * DOC: Introduction
> > + *
> > + * Linux defines a set of common helpers which can be used to against its use
> > + * of standard or custom Linux sections, this section is dedicated to these
> > + * helpers.
>
> I'm still not quite sure what a Linux de-facto/standard/common section is
> after this. Are they output sections?
We have ELF standard sections, and we have then sections which Linux has introduced
over the years which are now just known to be expected part of Linux, such as init
stuff which we free after boot. The combination of the ELF standard sections and
series of expected sections in Linux across all architectures is what this refers
to as Linux de-facto/standard/common sections. The header file is intended to
document these, step by step, and also provide helpers which allow further
customizations based on these sections.
>
> I think it would be reasonable to drop the LINUX_ prefix and references to
> Linux.
I'm not so sure about this for section stuff -- are we certain we won't ever
clash with some built in compiler things? I'm fine to drop the prefix --
bikeshedding -- will drop it for the next series unless I hear otherwise...
Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
