On Thursday 28 January 2016 17:42:41 you wrote:
> On Thu, Jan 28, 2016 at 11:14:35AM +0800, Fengguang Wu wrote:
> > On Wed, Jan 27, 2016 at 10:44:01AM +0100, Arnd Bergmann wrote:
> > > - CONFIG_PHYS_OFFSET needs to be entered manually to be a number
> > > in 'make config'
> >
> > That's a problem for auto tests.
>
> I'm really against the idea of providing some kind of "default" to it.
> Not providing a default means that people _have_ to do some research
> for their particular system in order to provide a value, and they're
> more likely to get the right value. Providing a default will lead to
> the assumption that the value is okay, and then we'll end up with
> people complaining that their kernel doesn't boot, and is totally
> silent.
>
> The only default I'd accept is one based on the rest of the config -
> in other words, re-introducing all the physical address of RAM that
> we used to have in the mach/memory.h files...
This doesn't sound too hard. I've picked the defaults out of the
git history in the patch below. The only tricky part was davinci,
which has two different addresses and requires a little rework
to avoid circular dependencies.
Most platforms these days hardcode ARCH_PATCH_PHS_VIRT anyway,
so we only need to list the bunch of remaining ones.
> There's other ways around these kinds of things, the Kconfig system
> does allow a Kconfig fragment which can be used to pre-set some
> configuration options to particular values - and so which can be used
> to set CONFIG_PHYS_OFFSET prior to an allrandconfig or similar.
I don't know what Fenguang's problem was with that approach, but
at least at the moment he's using a fixup after running randconfig.
In my own tests, I'm doing yet another approach by marking a
handful of symbols as 'depends on BROKEN' in my testing patches,
but clearly that does not work when building other people's trees.
The other related issue is the DEBUG_UART_{VIRT,PHYS} setting,
where there is no safe platform-specific default. I have two
ideas for working around that, maybe one of them sounds ok to
you:
a) find a way to warn and/or disable DEBUG_LL when no address
is set, rather than failing the build
b) add 'default 0 if COMPILE_TEST' to make it harder to get this
wrong by accident (hopefully nobody tries to run a COMPILE_TEST
kernel). Also maybe add a #warning if DEBUG_UART_VIRT is
outside of VMALLOC_START...PCI_IOBASE area, which would cover
this case as well.
Arnd
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2217ec9726c9..1d2b5e6cab14 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,15 +273,29 @@ config PHYS_OFFSET
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
+ ARCH_DOVE || \
ARCH_FOOTBRIDGE || \
+ (ARCH_GEMINI && GEMINI_MEM_SWAP) || \
ARCH_INTEGRATOR || \
+ ARCH_IOP33X || \
ARCH_IOP13XX || \
+ ARCH_IXP4XX || \
ARCH_KS8695 || \
- (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
- default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) || \
+ ARCH_W90X900
+ default 0x10000000 if (ARCH_GEMINI && !GEMINI_MEM_SWAP) || \
+ ARCH_OMAP1 || \
+ ARCH_RPC
default 0x20000000 if ARCH_S5PV210
+ default 0x30000000 if ARCH_S3C24XX
default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
- default 0xc0000000 if ARCH_SA1100
+ default 0x80000000 if (ARCH_DAVINCI_DMx && !ARCH_DAVINCI_DA8XX) || \
+ ARCH_NETX || \
+ ARCH_LPC32XX
+ default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+ default 0xc0000000 if (ARCH_DAVINCI_DA8XX && !ARCH_DAVINCI_DMx) || \
+ ARCH_CLPS711X || \
+ ARCH_SA1100
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -627,6 +641,7 @@ config ARCH_DAVINCI
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 7a9f2b8c0a42..36c8f5324e43 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -9,7 +9,6 @@ config CP_INTC
config ARCH_DAVINCI_DMx
bool
- select CPU_ARM926T
menu "TI DaVinci Implementations"
@@ -32,7 +31,7 @@ config ARCH_DAVINCI_DM646x
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
- depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+ depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
select ARCH_DAVINCI_DA8XX
# needed on silicon revs 1.0, 1.1:
select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -40,13 +39,12 @@ config ARCH_DAVINCI_DA830
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
- depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+ depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
select ARCH_DAVINCI_DA8XX
select CP_INTC
config ARCH_DAVINCI_DA8XX
bool
- select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
