On Wednesday 10 June 2015 06:31 PM, Will Deacon wrote:
> On Wed, Jun 10, 2015 at 11:58:40AM +0100, Peter Zijlstra wrote:
>> On Wed, Jun 10, 2015 at 09:34:18AM +0000, Vineet Gupta wrote:
>>> On Tuesday 09 June 2015 06:10 PM, Peter Zijlstra wrote:
>> I think the most interesting part is the device side.
>>
>>>>> +/*
>>>>> + * DSYNC:
>>>>> + * - Waits for completion of all outstanding memory operations before any new
>>>>> + * operations can begin
>>>>> + * - Includes implicit memory operations such as cache/TLB/BPU maintenance ops
>>>>> + * - Lighter version of SYNC as it doesn't wait for non-memory operations
>>>>> + */
>>>>> +#define mb() asm volatile("dsync\n" : : : "memory")
>>>> So mb() is supposed to order against things like DMA memory ops, is DMA
>>>> part of point 1 or 3, if 3, this is not a suitable instruction.
>>> Can u please explain the DMA case a bit more ? From what I understood and used in
>>> say ethernet driver, it is more of a line drawn between say cpu updating a shared
>>> buffer descriptor and kicking a MMIO register (which in turn could initiate a DMA)
>>> but I'm not sure how mb() can possibly order with DMA per se (unless there's some
>>> advanced form of IO-coherency)
>> I'm afraid I might not be the best of sources here, I tend to stay away
>> from actual device stuff like that. I've Cc'ed Will Deacon who might be
>> able to shed a bit more light on this aspect.
> I'd definitely expect mb() to order arbitrary memory accesses against each
> other (i.e. regardless of whether or not they're to RAM or MMIO devices).
> Some drivers use it to "flush the writebuffer" but I don't think that makes
> a whole lot of sense. Certainly, on ARM, if we want to know that something
> reached an MMIO endpoint then we'll need a read-back as well as the barrier
> for the general case.
>
> You also need that guarantee in your readl/writel family of macros. It's
> extremely heavy and rarely needed, which is why I added the _relaxed
> versions to all architectures.
Wow - adding that to these accessors will really be heavy - given that a whole
bunch of drivers still use the stock API (or perhaps don't know / care whether
they need the readl or the relaxed api. And it is practically impossible to switch
them over - after if ain't broken how can u fix it. So far we've been testing this
implementation (readl/writel - w/o any explicit barrier) on slower FPGA builds and
this includes a whole bunch of designware IP - mmc, eth, gpio.... and don't see
any ill effects - do you reckon we still need to add it.
> The "ordering against DMA" is something like reading an MMIO register to
> determine whether the DMA has completed, then going off to read the contents
> out of the DMA buffer. The comment you have about DSYNC makes it sound like
> it's not sufficient for this case.
IMHO this use case is slightly pedantic - since DMA completion will typically
follow up with an interrupt (I understand it's still possible to poll a dma status
reg). at any rate when it comes to dwaring a line between memory accesses -
regular or mmio, DSYNC is all we got in the ISA so ARCV2 mb() has to use it -
there's no better option.
-Vineet
> Will
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
