On Fri, May 8, 2015 at 5:04 PM, Yoshinori Sato
<ysato@xxxxxxxxxxxxxxxxxxxx> wrote:
> Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
> diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
> new file mode 100644
> index 0000000..582af79
> --- /dev/null
> +++ b/arch/h8300/include/asm/uaccess.h
> @@ -0,0 +1,131 @@
> +#ifndef __H8300_UACCESS_H
> +#define __H8300_UACCESS_H
> +
> +/*
> + * User space memory access functions
> + */
> +#include <linux/sched.h>
> +#include <linux/mm.h>
> +#include <linux/string.h>
> +
> +#include <asm/segment.h>
> +
> +#define VERIFY_READ 0
> +#define VERIFY_WRITE 1
> +
> +/* We let the MMU do all checking */
> +#define access_ok(type, addr, size) __access_ok((unsigned long)addr, size)
> +static inline int __access_ok(unsigned long addr, unsigned long size)
> +{
> + return 1;
> +}
> +
> +/*
> + * The exception table consists of pairs of addresses: the first is the
> + * address of an instruction that is allowed to fault, and the second is
> + * the address at which the program should continue. No registers are
> + * modified, so it is entirely up to the continuation code to figure out
> + * what to do.
> + *
> + * All the routines below use bits of fixup code that are out of line
> + * with the main instruction path. This means when everything is well,
> + * we don't even have to jump over them. Further, they do not intrude
> + * on our cache or tlb entries.
> + */
> +
> +struct exception_table_entry {
> + unsigned long insn, fixup;
> +};
> +
> +/* Returns 0 if exception not found and fixup otherwise. */
> +extern unsigned long search_exception_table(unsigned long);
> +
> +
> +/*
> + * These are the main single-value transfer routines. They automatically
> + * use the right size if we just have the right pointer type.
> + */
> +
> +#define put_user(x, ptr) \
> +({ \
> + int __pu_err = 0; \
> + typeof(*(ptr)) __pu_val = (x); \
> + switch (sizeof(*(ptr))) { \
> + case 1: \
> + /* falll through */ \
> + case 2: \
> + /* fall through */ \
> + case 4: \
> + *(ptr) = x; \
> + break; \
> + case 8: \
> + memcpy(ptr, &__pu_val, sizeof(*(ptr))); \
> + break; \
> + default: \
> + __pu_err = __put_user_bad(); \
> + break; \
> + } \
> + __pu_err; \
> +})
> +
> +#define __put_user(x, ptr) put_user(x, ptr)
> +
> +extern int __put_user_bad(void);
> +
> +/*
> + * Tell gcc we read from memory instead of writing: this is because
> + * we do not write to any memory gcc knows about, so there are no
> + * aliasing issues.
> + */
> +
> +#define __ptr(x) ((unsigned long *)(x))
> +
> +/*
> + * Tell gcc we read from memory instead of writing: this is because
> + * we do not write to any memory gcc knows about, so there are no
> + * aliasing issues.
> + */
> +
> +#define get_user(x, ptr) \
> +({ \
> + typeof(*(ptr)) __gu_val; \
> + int __gu_err = 0; \
> + switch (sizeof(*(ptr))) { \
> + case 1: \
> + *(u8 *)&__gu_val = *((u8 *)(ptr)); \
> + break; \
> + case 2: \
> + *(u16 *)&__gu_val = *((u16 *)ptr); \
> + break; \
> + case 4: \
> + *(u32 *)&__gu_val = *((u32 *)ptr); \
> + break; \
> + case 8: \
> + memcpy((void *)&__gu_val, ptr, sizeof(*(ptr))); \
> + break; \
> + default: \
> + __gu_err = __get_user_bad(); \
> + break; \
> + } \
> + (x) = (typeof(*(ptr)))__gu_val; \
> + __gu_err; \
> +})
> +#define __get_user(x, ptr) get_user(x, ptr)
> +
> +extern int __get_user_bad(void);
> +
> +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
> +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
> +
> +#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
> +#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
> +#define __copy_to_user_inatomic __copy_to_user
> +#define __copy_from_user_inatomic __copy_from_user
> +
> +unsigned long clear_user(void __user *addr, unsigned long size);
> +#define strnlen_user(s, n) (strnlen(s, n) + 1)
> +long strncpy_from_user(char *d, const char *s, long n);
> +
> +#define __clear_user clear_user
> +
> +#endif /* _H8300_UACCESS_H */
Nothing serious, but I think you can drop most code in this file by
using asm-generic/uaccess.h.
--
Thanks,
//richard
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
