Re: [PATCH v5 09/15] dt-bindings: Document the STM32 USART bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 3, 2015 at 12:01 PM, Maxime Coquelin
<mcoquelin.stm32@xxxxxxxxx> wrote:
> This adds documentation of device tree bindings for the
> STM32 USART
>
> Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> ---
>  .../devicetree/bindings/serial/st,stm32-usart.txt  | 32 ++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
> new file mode 100644
> index 0000000..090a3a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
> @@ -0,0 +1,32 @@
> +* STMicroelectronics STM32 USART
> +
> +Required properties:
> +- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on
> +whether the device supports synchronous mode.
> +- reg: The address and length of the peripheral registers space
> +- interrupts: The interrupt line of the USART instance
> +- clocks: The input clock of the USART instance
> +
> +Optional properties:
> +- pinctrl: The reference on the pins configuration
> +- st,hw-flow-ctrl: bool flag to enable hardware flow control.

We already have "auto-flow-control" for 8250. Does that work for you?

> +
> +Examples:
> +usart4: serial@40004c00 {
> +       compatible = "st,stm32-uart";
> +       reg = <0x40004c00 0x400>;
> +       interrupts = <52>;
> +       clocks = <&clk_pclk1>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_usart4>;
> +};
> +
> +usart2: serial@40004400 {
> +       compatible = "st,stm32-usart", "st,stm32-uart";
> +       reg = <0x40004400 0x400>;
> +       interrupts = <38>;
> +       clocks = <&clk_pclk1>;
> +       st,hw-flow-ctrl;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux