Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx> create mode 100644 arch/h8300/Kconfig create mode 100644 arch/h8300/Kconfig.cpu create mode 100644 arch/h8300/Kconfig.debug create mode 100644 arch/h8300/Makefile diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig new file mode 100644 index 0000000..970dd9a --- /dev/null +++ b/arch/h8300/Kconfig @@ -0,0 +1,121 @@ +config H8300 + bool + default y + select HAVE_IDE + select GENERIC_ATOMIC64 + select HAVE_UID16 + select VIRT_TO_BUS + select ARCH_WANT_IPC_PARSE_VERSION + select GENERIC_IRQ_SHOW + select ARCH_WANT_FRAME_POINTER + select GENERIC_CPU_DEVICES + select MODULES_USE_ELF_RELA + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + +config MMU + bool + default n + +config SWAP + bool + default n + +config ZONE_DMA + bool + default y + +config FPU + bool + default n + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default n + +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config GENERIC_BUG + bool + depends on BUG + +config TIME_LOW_RES + bool + default y + +config NO_IOPORT + def_bool y + +config NO_DMA + def_bool y + +config ISA + bool + default y + +config PCI + bool + default n + +config HZ + int + default 100 + +config NR_CPUS + int + default 1 + +config NO_IOPORT_MAP + def_bool y + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +source "arch/h8300/Kconfig.cpu" + +menu "Kernel Features" + +source "kernel/Kconfig.preempt" + +source "mm/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/h8300/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu new file mode 100644 index 0000000..5fe6c5e --- /dev/null +++ b/arch/h8300/Kconfig.cpu @@ -0,0 +1,132 @@ +menu "Processor type and features" + +choice + prompt "H8/300 platform" + +config H8300_AE3068 + bool "AE-3068/69" + select H83069 + select RAMKERNEL + help + AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support + More Information. (Japanese Only) + <http://akizukidenshi.com/catalog/default.aspx> + AE-3068/69 Evaluation Board Support + More Information. + <http://www.microtronique.com/ae3069lan.htm> + +config H8300_H8MAX + bool "H8MAX" + select H83069 + select RAMKERNEL + help + H8MAX Evaluation Board Support + More Information. (Japanese Only) + <http://strawberry-linux.com/h8/index.html> + +config H8300_KANEBEBE + bool "KaneBebe" + select H83069 + select RAMKERNEL + help + KaneBebe Evalition Board Support + +config H8300H_SIM + bool "H8/300H GDB Simulator" + select H83069 + select ROMKERNEL + help + GDB Simulator Support + More Information. + <http://sourceware.org/sid/> + +config H8S_EDOSK2674 + bool "EDOSK-2674" + select H8S2678 + select RAMKERNEL + help + Renesas EDOSK-2674 Evaluation Board Support + More Information. + <http://www.azpower.com/H8-uClinux/index.html> + <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp> + +config H8S_SIM + bool "H8S GDB Simulator" + select H8S2678 + select ROMKERNEL + help + GDB Simulator Support + More Information. + <http://sourceware.org/sid/> + +endchoice + +choice + prompt "CPU Selection" + +config H83069 + bool "H8/3065,3066,3067,3068,3069" + select CPU_H8300H + +config H8S2678 + bool "H8S/2670,2673,2674R,2675,2676" + select CPU_H8S + +endchoice + +config CPU_CLOCK + int "CPU Clock Frequency" + depends on ROMKERNEL + default "200000000" if H8300H_AKI3068NET || H8300H_SIM + default "250000000" if H8300H_H8MAX || H8300H_KANEBEBE + default "333333333" if H8S_EDOSK2674 || H8S_SIM + help + CPU Clock Frequency + +choice + prompt "Kernel executes from" + ---help--- + Choose the memory type that the kernel will be running in. + +config RAMKERNEL + bool "RAM" + help + The kernel will be resident in RAM when running. + +config ROMKERNEL + bool "ROM" + help + The kernel will be resident in FLASH/ROM when running. +endchoice + +config CPU_H8300H + bool + depends on H83069 + default y + +config CPU_H8S + bool + depends on H8S2678 + default y + +config ROMSIZE + hex "ROM size" + depends on ROMKERNEL + default 0x200000 + +config RAMBASE + hex "RAM base address" + default 0x400000 + +config RAMSIZE + hex "RAM size" + depends on ROMKERNEL + default 0x200000 if H8300_AE3068 || H8300_H8MAX || H8300H_SIM + default 0x400000 if H8300_KANEBEBE + default 0x800000 if H8S_EDOSK2674 || H8S_SIM + +config OFFSET + hex "Load offset" + default 0 + +endmenu diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug new file mode 100644 index 0000000..ff2e592 --- /dev/null +++ b/arch/h8300/Kconfig.debug @@ -0,0 +1,65 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config FULLDEBUG + bool "Full Symbolic/Source Debugging support" + help + Enable debugging symbols on kernel build. + +config HIGHPROFILE + bool "Use fast second timer for profiling" + help + Use a fast secondary clock to produce profiling information. + +config NO_KERNEL_MSG + bool "Suppress Kernel BUG Messages" + help + Do not output any debug BUG messages within the kernel. + +config EARLY_PRINTK + bool "Early printk support" + +config SYSCALL_PRINT + bool "SystemCall trace print" + help + output history of systemcall + +config GDB_DEBUG + bool "Use gdb stub" + depends on (!H8300H_SIM && !H8S_SIM) + help + gdb stub exception support + +config SH_STANDARD_BIOS + bool "Use gdb protocol serial console" + depends on (!H8300H_SIM && !H8S_SIM) + help + serial console output using GDB protocol. + Require eCos/RedBoot + +config DEFAULT_CMDLINE + bool "Use builtin commandline" + default n + help + builtin kernel commandline enabled. + +config KERNEL_COMMAND + string "Buildin command string" + depends on DEFAULT_CMDLINE + help + builtin kernel commandline strings. + +config BLKDEV_RESERVE + bool "BLKDEV Reserved Memory" + default n + help + Reserved BLKDEV area. + +config BLKDEV_RESERVE_ADDRESS + hex 'start address' + depends on BLKDEV_RESERVE + help + BLKDEV start address. + +endmenu diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile new file mode 100644 index 0000000..f688160 --- /dev/null +++ b/arch/h8300/Makefile @@ -0,0 +1,46 @@ +# +# arch/h8300/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# (C) Copyright 2002,2003 Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx> +# + +cflags-$(CONFIG_CPU_H8300H) := -mh +aflags-$(CONFIG_CPU_H8300H) := -mh -Wa,--mach=h8300h +ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf_linux +cflags-$(CONFIG_CPU_H8S) := -ms +aflags-$(CONFIG_CPU_H8S) := -ms -Wa,--mach=h8300s +ldflags-$(CONFIG_CPU_H8S) := -mh8300self_linux + +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += -mint32 -fno-builtin +KBUILD_CFLAGS += -D__linux__ +KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" +KBUILD_AFLAGS += $(aflags-y) +LDFLAGS += $(ldflags-y) + +CROSS_COMPILE := h8300-unknown-linux- +LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ + +libs-y += arch/$(ARCH)/lib/ $(LIBGCC) + +boot := arch/h8300/boot + +archmrproper: + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + +vmlinux.srec vmlinux.bin zImage uImage.bin: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +define archhelp + @echo 'vmlinux.bin - Create raw binary' + @echo 'vmlinux.srec - Create srec binary' + @echo 'zImage - Compressed kernel image' +endef -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
