Re: arm: Only load TLS values when needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi André

(I've put RMK and LAKML back on Cc: they got dropped somewhere along the way)

On 14/08/13 22:21, André Hentschel wrote:
[...]
Now we've only got one instruction between the store and the load
and risk stalling the pipeline...

Dave M cautiously says "The ancient advice was that one instruction
was enough" but this is very core dependent... I wonder if anyone
has a good idea about whether this is an issue here...?

We could use a ldrd at the top, that'd be nearly what we have right
now, don't we?

Yea, that'd be good - as far as I can see from an 1136 TRM, the ldrd *may* be two cycles (depending on alignment of the words) but the ldr and ldrne will always be two cycles. Ahhh, the joys of modifying the fast path ;)

Was expecting to see something that reflected this discussion,

Ah ok, i misunderstood that, sry.
Something like that?

From: André Hentschel <nerv@xxxxxxxxxxx>

This patch intents to reduce loading instructions when the resulting value is not used.
It's a follow up on a4780adeefd042482f624f5e0d577bf9cdcbb760


You caught me just before running away for a week of holiday, but I've managed to squeeze in a bit of testing - hope this helps - I'll try to be clear about what I have/haven't tested so you can judge for yourself how much weight to give this.

What I've tested:

* Apply your code to 3.11-rc5
* Boot on Integrator CP (1176 r1p0) and run a full Debian Wheezy init

--> It works!

I also applied the following diff and rebuilt to check that we were really testing the V6 NOT V6K path here:

diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 31743f7..71dfe82 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -43,6 +43,7 @@
 #define switch_tls     switch_tls_v6
 #elif defined(CONFIG_CPU_32v6K)
 #define tls_emu                0
+#error
 #define has_tls_reg            1
 #define switch_tls     switch_tls_v6k
 #else

What I've *not* tested:
* As this CPU does not have the tls register, I haven't run any tests that try to read/write it, but we wouldn't expect that to work, right?
* Haven't tried a V7 platform, as I understand you've already done that.
* Haven't verified it still builds for v4 (which was the problem for ldrd in the past and now we've put it back, so that's important)
* Performance impact

I think it'd be good if you can verify the bottom two points - especially the ldrd one: perhaps Russell can tell you which platform it broke on before?

So, that's a
Tested-by: Jonathan Austin <jonathan.austin@xxxxxxx>

If you want it :)
Hope that helps,

Jonny

Signed-off-by: André Hentschel <nerv@xxxxxxxxxxx>

---
This patch is against 28fbc8b6a29c849a3f03a6b05010d4b584055665

diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 83259b8..31743f7 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -3,29 +3,31 @@

  #ifdef __ASSEMBLY__
  #include <asm/asm-offsets.h>
-	.macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
+	.macro switch_tls_none, prev, next, tp, tpuser, tmp1, tmp2
  	.endm

-	.macro switch_tls_v6k, base, tp, tpuser, tmp1, tmp2
+	.macro switch_tls_v6k, prev, next, tp, tpuser, tmp1, tmp2
+	ldrd	\tp, \tpuser, [\next, #TI_TP_VALUE]	@ get the next TLS and user r/w register
  	mrc	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
  	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
  	mcr	p15, 0, \tpuser, c13, c0, 2	@ and the user r/w register
-	str	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
+	str	\tmp2, [\prev, #TI_TP_VALUE + 4] @ save it
  	.endm

-	.macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
+	.macro switch_tls_v6, prev, next, tp, tpuser, tmp1, tmp2
+	ldrd	\tp, \tpuser, [\next, #TI_TP_VALUE]
  	ldr	\tmp1, =elf_hwcap
  	ldr	\tmp1, [\tmp1, #0]
  	mov	\tmp2, #0xffff0fff
  	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
  	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
-	mrcne	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
+	mrcne	p15, 0, \tmp2, c13, c0, 2	@ get the previous user r/w register
  	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
  	mcrne	p15, 0, \tpuser, c13, c0, 2	@ set user r/w register
-	strne	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
+	strne	\tmp2, [\prev, #TI_TP_VALUE + 4] @ save it
  	.endm

-	.macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
+	.macro switch_tls_software, prev, next, tp, tpuser, tmp1, tmp2
  	mov	\tmp1, #0xffff0fff
  	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
  	.endm
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d40d0ef..11112de 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -689,12 +689,10 @@ ENTRY(__switch_to)
   THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
   THUMB(	str	sp, [ip], #4		   )
   THUMB(	str	lr, [ip], #4		   )
-	ldr	r4, [r2, #TI_TP_VALUE]
-	ldr	r5, [r2, #TI_TP_VALUE + 4]
  #ifdef CONFIG_CPU_USE_DOMAINS
  	ldr	r6, [r2, #TI_CPU_DOMAIN]
  #endif
-	switch_tls r1, r4, r5, r3, r7
+	switch_tls r1, r2, r4, r5, r3, r7
  #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
  	ldr	r7, [r2, #TI_TASK]
  	ldr	r8, =__stack_chk_guard





--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux