On Wednesday 29 June 2011 10:13:17 Geert Uytterhoeven wrote:
> + drivers/block/paride/comm.c: error: implicit declaration of function 'inb': => 54
> + drivers/block/paride/comm.c: error: implicit declaration of function 'inl': => 140
> + drivers/bluetooth/bluecard_cs.c: error: implicit declaration of function 'inb': => 348
> + drivers/char/pcmcia/cm4000_cs.c: error: implicit declaration of function 'outb': => 429
> + drivers/char/tpm/tpm_atmel.h: error: implicit declaration of function 'ioport_map': => 129
> + drivers/hwmon/dme1737.c: error: implicit declaration of function 'inb': => 556
> + drivers/hwmon/f71882fg.c: error: implicit declaration of function 'outb': => 1051
> + drivers/hwmon/it87.c: error: implicit declaration of function 'inb': => 83
> + drivers/isdn/hardware/avm/avmcard.h: error: implicit declaration of function 'insb': => 426
These and hundreds of others are all ISA/PCMCIA/PCI drivers that should
only be built if the respective PIO functions are provided. We already
have a CONFIG_HAS_IOPORT symbol for that, but use it inconsistently.
I want to eventually change all ARM subarchitectures that don't have any
of the buses mentioned above to not provide them any more, and to avoid
the build errors, my preferred solution would be to add
'depends on HAS_IOPORT' to a lot of places, like in the (incomplete)
patch below.
This also depends on serial8250 cleanup work that I started.
arch/arm/Kconfig | 1 +
arch/arm/kernel/setup.c | 4 ++++
drivers/base/platform.c | 2 ++
drivers/char/tpm/Kconfig | 2 +-
drivers/gpio/Kconfig | 1 +
drivers/input/gameport/Kconfig | 1 +
drivers/input/joystick/Kconfig | 12 ++++++++++++
drivers/input/touchscreen/Kconfig | 1 +
drivers/pcmcia/Kconfig | 1 +
drivers/rtc/Kconfig | 2 ++
drivers/staging/altera-stapl/Kconfig | 1 +
drivers/usb/host/Kconfig | 1 +
kernel/resource.c | 27 +++++++++++++++++++--------
security/integrity/ima/Kconfig | 2 +-
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 66e28e7..793dfa2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -819,6 +819,7 @@ config ARCH_U8500
bool "ST-Ericsson U8500 Series"
depends on MMU
select CPU_V7
+ select NO_IOPORT
select ARM_AMBA
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index edcab02..3bec937 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -164,6 +164,7 @@ static struct resource mem_res[] = {
#define kernel_code mem_res[1]
#define kernel_data mem_res[2]
+#ifdef CONFIG_HAS_IOPORT
static struct resource io_res[] = {
{
.name = "reserved",
@@ -188,6 +189,7 @@ static struct resource io_res[] = {
#define lp0 io_res[0]
#define lp1 io_res[1]
#define lp2 io_res[2]
+#endif
static const char *proc_arch[] = {
"undefined/unknown",
@@ -566,6 +568,7 @@ static void __init request_standard_resources(struct machine_desc *mdesc)
request_resource(&iomem_resource, &video_ram);
}
+#ifdef CONFIG_HAS_IOPORT
/*
* Some machines don't have the possibility of ever
* possessing lp0, lp1 or lp2
@@ -576,6 +579,7 @@ static void __init request_standard_resources(struct machine_desc *mdesc)
request_resource(&ioport_resource, &lp1);
if (mdesc->reserve_lp2)
request_resource(&ioport_resource, &lp2);
+#endif
}
/*
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 1c291af..ee97499 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -268,8 +268,10 @@ int platform_device_add(struct platform_device *pdev)
if (!p) {
if (resource_type(r) == IORESOURCE_MEM)
p = &iomem_resource;
+#ifdef CONFIG_HAS_IOPORT
else if (resource_type(r) == IORESOURCE_IO)
p = &ioport_resource;
+#endif
}
if (p && insert_resource(p, r)) {
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index f6595ab..b8224ed 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -4,7 +4,7 @@
menuconfig TCG_TPM
tristate "TPM Hardware Support"
- depends on HAS_IOMEM
+ depends on HAS_IOMEM && HAS_IOPORT
depends on EXPERIMENTAL
select SECURITYFS
---help---
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 2967002..e67de4c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -83,6 +83,7 @@ config GPIO_BASIC_MMIO
config GPIO_IT8761E
tristate "IT8761E GPIO support"
+ depends on HAS_IOPORT
help
Say yes here to support GPIO functionality of IT8761E super I/O chip.
diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index d279454..9a06c93 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -3,6 +3,7 @@
#
config GAMEPORT
tristate "Gameport support"
+ depends on HAS_IOPORT
---help---
Gameport support is for the standard 15-pin PC gameport. If you
have a joystick, gamepad, gameport card, a soundcard with a gameport
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 56eb471..04f3fca 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -17,6 +17,7 @@ if INPUT_JOYSTICK
config JOYSTICK_ANALOG
tristate "Classic PC analog joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
---help---
Say Y here if you have a joystick that connects to the PC
gameport. In addition to the usual PC analog joystick, this driver
@@ -34,6 +35,7 @@ config JOYSTICK_ANALOG
config JOYSTICK_A3D
tristate "Assassin 3D and MadCatz Panther devices"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have an FPGaming or MadCatz controller using the
A3D protocol over the PC gameport.
@@ -44,6 +46,7 @@ config JOYSTICK_A3D
config JOYSTICK_ADI
tristate "Logitech ADI digital joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Logitech controller using the ADI
protocol over the PC gameport.
@@ -54,6 +57,7 @@ config JOYSTICK_ADI
config JOYSTICK_COBRA
tristate "Creative Labs Blaster Cobra gamepad"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Creative Labs Blaster Cobra gamepad.
@@ -63,6 +67,7 @@ config JOYSTICK_COBRA
config JOYSTICK_GF2K
tristate "Genius Flight2000 Digital joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Genius Flight2000 or MaxFighter digitally
communicating joystick or gamepad.
@@ -73,6 +78,7 @@ config JOYSTICK_GF2K
config JOYSTICK_GRIP
tristate "Gravis GrIP joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Gravis controller using the GrIP protocol
over the PC gameport.
@@ -83,6 +89,7 @@ config JOYSTICK_GRIP
config JOYSTICK_GRIP_MP
tristate "Gravis GrIP MultiPort"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have the original Gravis GrIP MultiPort, a hub
that connects to the gameport and you connect gamepads to it.
@@ -93,6 +100,7 @@ config JOYSTICK_GRIP_MP
config JOYSTICK_GUILLEMOT
tristate "Guillemot joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Guillemot joystick using a digital
protocol over the PC gameport.
@@ -103,6 +111,7 @@ config JOYSTICK_GUILLEMOT
config JOYSTICK_INTERACT
tristate "InterAct digital joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have an InterAct gameport or joystick
communicating digitally over the gameport.
@@ -113,6 +122,7 @@ config JOYSTICK_INTERACT
config JOYSTICK_SIDEWINDER
tristate "Microsoft SideWinder digital joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a Microsoft controller using the Digital
Overdrive protocol over PC gameport.
@@ -123,6 +133,7 @@ config JOYSTICK_SIDEWINDER
config JOYSTICK_TMDC
tristate "ThrustMaster DirectConnect joysticks and gamepads"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you have a ThrustMaster controller using the
DirectConnect (BSP) protocol over the PC gameport.
@@ -268,6 +279,7 @@ config JOYSTICK_AS5011
config JOYSTICK_JOYDUMP
tristate "Gameport data dumper"
select GAMEPORT
+ depends on HAS_IOPORT
help
Say Y here if you want to dump data from your joystick into the system
log for debugging purposes. Say N if you are making a production
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cabd9e5..b5b99b0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -310,6 +310,7 @@ config TOUCHSCREEN_INTEL_MID
config TOUCHSCREEN_MK712
tristate "ICS MicroClock MK712 touchscreen"
+ depends on HAS_IOPORT
help
Say Y here if you have the ICS MicroClock MK712 touchscreen
controller chip in your system.
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 6e318ce..9eca7e7 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -19,6 +19,7 @@ if PCCARD
config PCMCIA
tristate "16-bit PCMCIA support"
+ depends on HAVE_PCMCIA
select CRC32
default y
---help---
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ce2aabf..df52628 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -481,6 +481,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS || SPARC64
+ depends on HAS_IOPORT
default y if X86
help
Say "yes" here to get direct support for the real time clock
@@ -636,6 +637,7 @@ config RTC_MXC
config RTC_DRV_BQ4802
tristate "TI BQ4802"
+ depends on HAS_IOPORT
help
If you say Y here you will get support for the TI
BQ4802 RTC chip.
diff --git a/drivers/staging/altera-stapl/Kconfig b/drivers/staging/altera-stapl/Kconfig
index 7f01d8e..9fab568 100644
--- a/drivers/staging/altera-stapl/Kconfig
+++ b/drivers/staging/altera-stapl/Kconfig
@@ -3,6 +3,7 @@ comment "Altera FPGA firmware download module"
config ALTERA_STAPL
tristate "Altera FPGA firmware download module"
depends on I2C
+ depends on HAS_IOPORT
default n
help
An Altera FPGA module. Say Y when you want to support this tool.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5f9f399..787492e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -260,6 +260,7 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
depends on USB
+ depends on HAS_IOPORT
default N
---help---
Supports the Philips ISP1362 chip as a host controller
diff --git a/kernel/resource.c b/kernel/resource.c
index 798e2fa..f104185 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -21,7 +21,7 @@
#include <linux/pfn.h>
#include <asm/io.h>
-
+#ifdef IO_SPACE_LIMIT
struct resource ioport_resource = {
.name = "PCI IO",
.start = 0,
@@ -29,6 +29,7 @@ struct resource ioport_resource = {
.flags = IORESOURCE_IO,
};
EXPORT_SYMBOL(ioport_resource);
+#endif
struct resource iomem_resource = {
.name = "PCI mem",
@@ -97,6 +98,7 @@ static const struct seq_operations resource_op = {
.show = r_show,
};
+#ifdef IO_SPACE_LIMIT
static int ioports_open(struct inode *inode, struct file *file)
{
int res = seq_open(file, &resource_op);
@@ -107,6 +109,14 @@ static int ioports_open(struct inode *inode, struct file *file)
return res;
}
+static const struct file_operations proc_ioports_operations = {
+ .open = ioports_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#endif
+
static int iomem_open(struct inode *inode, struct file *file)
{
int res = seq_open(file, &resource_op);
@@ -117,13 +127,6 @@ static int iomem_open(struct inode *inode, struct file *file)
return res;
}
-static const struct file_operations proc_ioports_operations = {
- .open = ioports_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
static const struct file_operations proc_iomem_operations = {
.open = iomem_open,
.read = seq_read,
@@ -133,7 +136,9 @@ static const struct file_operations proc_iomem_operations = {
static int __init ioresources_init(void)
{
+#ifdef IO_SPACE_LIMIT
proc_create("ioports", 0, NULL, &proc_ioports_operations);
+#endif
proc_create("iomem", 0, NULL, &proc_iomem_operations);
return 0;
}
@@ -941,8 +946,14 @@ static int __init reserve_setup(char *str)
res->end = io_start + io_num - 1;
res->flags = IORESOURCE_BUSY;
res->child = NULL;
+#ifdef IO_SPACE_LIMIT
if (request_resource(res->start >= 0x10000 ? &iomem_resource : &ioport_resource, res) == 0)
reserved = x+1;
+#else
+ if (request_resource(&iomem_resource, res) == 0)
+ reserved = x+1;
+
+#endif
}
}
return 1;
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index b6ecfd4..c0bdabc 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -8,7 +8,7 @@ config IMA
select CRYPTO_HMAC
select CRYPTO_MD5
select CRYPTO_SHA1
- select TCG_TPM if !S390
+ select TCG_TPM if HAS_IOPORT
select TCG_TIS if TCG_TPM
help
The Trusted Computing Group(TCG) runtime Integrity
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
