Dear Uwe, 2011/3/29 Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>: > On Tue, Mar 29, 2011 at 12:01:40PM +0530, Madhavi Manchala wrote: >> Dear All, >> >> I have defined a MACHINE_START macro in my board C file as follows. >> >> MACHINE_START(S3C2510, "S3C2510") >> .init_irq = s3c2510_init_irq, >> .timer = &s3c2510_time_init, >> MACHINE_END >> >> When I try to compile this C file, I am seeing the following error message. >> >> arch/arm/mach-s3c2510/s3c2510.c:35:1: error: 'MACH_TYPE_S3C2510' >> undeclared here (not in a function) > you need a line defining S3C2510 in arch/arm/tools/mach-types. Yeah. It is there in the arch/arm/tools/mach-types file. I did not add to it, but it is automatically generated. The few lines from the arch/arm/tools/mach-types file are as follows. izarus MACH_IZARUS IZARUS 573 pxa_rts MACH_RTS RTS 574 se5100 MACH_SE5100 SE5100 575 s3c2510 MACH_S3C2510 S3C2510 576 csb437tl MACH_CSB437TL CSB437TL 577 slauson MACH_SLAUSON SLAUSON 578 pearlriver MACH_PEARLRIVER PEARLRIVER 579 tdc_p210 MACH_TDC_P210 TDC_P210 580 The machine S3C2510 is there in that file. Thanks and Regards, Madhavi M. > Best regards > Uwe > > -- > Pengutronix e.K. | Uwe Kleine-König | > Industrial Linux Solutions | http://www.pengutronix.de/ | > -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
