Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Hirokazu Takata <takata@xxxxxxxxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
---
arch/m32r/platforms/mappi/setup.c | 53 ++++++++++++++++++--------------------
1 file changed, 26 insertions(+), 27 deletions(-)
Index: linux-2.6/arch/m32r/platforms/mappi/setup.c
===================================================================
--- linux-2.6.orig/arch/m32r/platforms/mappi/setup.c
+++ linux-2.6/arch/m32r/platforms/mappi/setup.c
@@ -38,39 +38,30 @@ static void enable_mappi_irq(unsigned in
outl(data, port);
}
-static void mask_and_ack_mappi(unsigned int irq)
+static void mask_mappi(struct irq_data *data)
{
- disable_mappi_irq(irq);
+ disable_mappi_irq(data->irq);
}
-static void end_mappi_irq(unsigned int irq)
+static void unmask_mappi(struct irq_data *data)
{
- enable_mappi_irq(irq);
+ enable_mappi_irq(data->irq);
}
-static unsigned int startup_mappi_irq(unsigned int irq)
-{
- enable_mappi_irq(irq);
- return (0);
-}
-
-static void shutdown_mappi_irq(unsigned int irq)
+static void shutdown_mappi(struct irq_data *data)
{
unsigned long port;
- port = irq2port(irq);
+ port = irq2port(data->irq);
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct irq_chip mappi_irq_type =
{
- .name = "MAPPI-IRQ",
- .startup = startup_mappi_irq,
- .shutdown = shutdown_mappi_irq,
- .enable = enable_mappi_irq,
- .disable = disable_mappi_irq,
- .ack = mask_and_ack_mappi,
- .end = end_mappi_irq
+ .name = "MAPPI-IRQ",
+ .irq_shutdown = shutdown_mappi,
+ .irq_mask = mask_mappi,
+ .irq_unmask = unmask_mappi,
};
void __init init_IRQ(void)
@@ -84,46 +75,54 @@ void __init init_IRQ(void)
#ifdef CONFIG_NE2000
/* INT0 : LAN controller (RTL8019AS) */
- set_irq_chip(M32R_IRQ_INT0, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_INT0, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
disable_mappi_irq(M32R_IRQ_INT0);
#endif /* CONFIG_M32R_NE2000 */
/* MFT2 : system timer */
- set_irq_chip(M32R_IRQ_MFT2, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_MFT2, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
disable_mappi_irq(M32R_IRQ_MFT2);
#ifdef CONFIG_SERIAL_M32R_SIO
/* SIO0_R : uart receive data */
- set_irq_chip(M32R_IRQ_SIO0_R, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_SIO0_R, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_SIO0_R].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO0_R);
/* SIO0_S : uart send data */
- set_irq_chip(M32R_IRQ_SIO0_S, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_SIO0_S, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_SIO0_S].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO0_S);
/* SIO1_R : uart receive data */
- set_irq_chip(M32R_IRQ_SIO1_R, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_SIO1_R, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_SIO1_R].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO1_R);
/* SIO1_S : uart send data */
- set_irq_chip(M32R_IRQ_SIO1_S, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_SIO1_S, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_SIO1_S].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO1_S);
#endif /* CONFIG_SERIAL_M32R_SIO */
#if defined(CONFIG_M32R_PCC)
/* INT1 : pccard0 interrupt */
- set_irq_chip(M32R_IRQ_INT1, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_INT1, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00;
disable_mappi_irq(M32R_IRQ_INT1);
/* INT2 : pccard1 interrupt */
- set_irq_chip(M32R_IRQ_INT2, &mappi_irq_type);
+ set_irq_chip_and_handler(M32R_IRQ_INT2, &mappi_irq_type,
+ handle_level_irq);
icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00;
disable_mappi_irq(M32R_IRQ_INT2);
#endif /* CONFIG_M32RPCC */
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
