>From a7928ed5ab8b1f8f1b1b2bd8a9cb59819f46a522 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Date: Sun, 9 Jan 2011 09:13:22 +0100
Subject: [PATCH 1/2] kbuild: asm-generic support
There is an increasing amount of header files
shared between individual architectures in asm-generic.
To avoid a lot of dummy wrapper files that just
include the corresponding file in asm-generic provide
some basic support in kbuild for this.
With the following patch an architecture can maintain
a list of files in the file arch/$(ARCH)/include/asm/Kbuild
To use a generic file just add:
generic-y += <name-of-header-file.h>
For each file listed kbuild will generate the necessary
wrapper in arch/$(ARCH)/include/generated/asm.
When installing userspace headers a wrapper is likewise created.
The original inspiration for this came from the unicor32
patchset - although is used a different method.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Guan Xuetao <guanxuetao@xxxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
---
.gitignore | 1 +
Documentation/kbuild/makefiles.txt | 31 +++++++++++++++++
Makefile | 15 ++++++--
include/asm-generic/Kbuild.asm | 66 ++++++++++++++++++------------------
scripts/Makefile.headersinst | 19 +++++++++--
scripts/asm-generic.sh | 23 ++++++++++++
6 files changed, 115 insertions(+), 40 deletions(-)
create mode 100644 scripts/asm-generic.sh
diff --git a/.gitignore b/.gitignore
index 8faa6c0..e3cfd57 100644
--- a/.gitignore
+++ b/.gitignore
@@ -56,6 +56,7 @@ modules.builtin
include/config
include/linux/version.h
include/generated
+arch/*/include/generated
# stgit generated dirs
patches-*
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 0ef00bd..7763786 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1250,6 +1250,37 @@ See subsequent chapter for the syntax of the Kbuild file.
In the example above all exported headers in the Kbuild file
will be located in the directory "include/linux" when exported.
+ --- 7.4 generic-y
+
+ If an architecture uses a verbatim copy of a header from
+ include/asm-generic then this is listed in the file
+ arch/$(ARCH)/include/asm/Kbuild like this:
+
+ Example:
+ #arch/x86/include/asm/Kbuild
+ generic-y += termios.h
+ generic-y += rtc.h
+
+ During the prepare phase of the build a wrapper include
+ file is generated in the directory:
+
+ arch/$(ARCH)/include/generated/asm
+
+ When a header is exported where the architecture uses
+ the generic header a similar wrapper is generated as part
+ of the set of exported headers.
+
+ --- 7.5 generic-export-y
+
+ List of generic headers to be exported if the architecture
+ does not have their own variants.
+
+ Example:
+ #include/asm-generic/Kbuild.asm
+ generic-export-y += termios.h
+
+ See "generic-y" for a description of how an architectue
+ define which headers are used from the generic set.
=== 8 Kbuild Variables
diff --git a/Makefile b/Makefile
index 74b2555..9eeb44e 100644
--- a/Makefile
+++ b/Makefile
@@ -344,7 +344,8 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \
+LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \
+ -Iarch/$(hdr-arch)/include/generated -Iinclude \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-include include/generated/autoconf.h
@@ -411,6 +412,11 @@ ifneq ($(KBUILD_SRC),)
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/asm-generic.sh $(SRCARCH)
+
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
@@ -942,7 +948,7 @@ ifneq ($(KBUILD_SRC),)
endif
# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile asm-generic
prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
include/config/auto.conf
@@ -1016,7 +1022,7 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
PHONY += __headers
-__headers: include/linux/version.h scripts_basic FORCE
+__headers: include/linux/version.h scripts_basic asm-generic FORCE
$(Q)$(MAKE) $(build)=scripts scripts/unifdef
PHONY += headers_install_all
@@ -1131,7 +1137,8 @@ CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config usr/include include/generated
+MRPROPER_DIRS += include/config usr/include include/generated \
+ arch/*/include/generated
MRPROPER_FILES += .config .config.old .version .old_version \
include/linux/version.h \
Module.symvers tags TAGS cscope*
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index c5d2e5d..a9e89f3 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,45 +1,45 @@
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
$(srctree)/include/asm-$(SRCARCH)/kvm.h),)
-header-y += kvm.h
+generic-export-y += kvm.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
-header-y += kvm_para.h
+generic-export-y += kvm_para.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
$(srctree)/include/asm-$(SRCARCH)/a.out.h),)
-header-y += a.out.h
+generic-export-y += a.out.h
endif
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+generic-export-y += auxvec.h
+generic-export-y += bitsperlong.h
+generic-export-y += byteorder.h
+generic-export-y += errno.h
+generic-export-y += fcntl.h
+generic-export-y += ioctl.h
+generic-export-y += ioctls.h
+generic-export-y += ipcbuf.h
+generic-export-y += mman.h
+generic-export-y += msgbuf.h
+generic-export-y += param.h
+generic-export-y += poll.h
+generic-export-y += posix_types.h
+generic-export-y += ptrace.h
+generic-export-y += resource.h
+generic-export-y += sembuf.h
+generic-export-y += setup.h
+generic-export-y += shmbuf.h
+generic-export-y += sigcontext.h
+generic-export-y += siginfo.h
+generic-export-y += signal.h
+generic-export-y += socket.h
+generic-export-y += sockios.h
+generic-export-y += stat.h
+generic-export-y += statfs.h
+generic-export-y += swab.h
+generic-export-y += termbits.h
+generic-export-y += termios.h
+generic-export-y += types.h
+generic-export-y += unistd.h
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index f89cb87..3a630c2 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,6 +14,7 @@ kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
_dst := $(if $(destination-y),$(destination-y),$(_dst))
+_src := $(srctree)/$(obj)
include scripts/Kbuild.include
@@ -27,10 +28,17 @@ header-y := $(filter-out %/, $(header-y))
install-file := $(install)/.install
check-file := $(install)/.check
+# generic-export-y list all generic headers to be exported
+# generic-y list all files an architecture uses from asm-generic
+# Use this to build a list of headers which require a wrapper
+wrapper-files := $(filter $(generic-export-y), $(generic-y))
+
# all headers files for this dir
-all-files := $(header-y) $(objhdr-y)
-input-files := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+header-y := $(filter-out $(wrapper-files), $(header-y))
+all-files := $(header-y) $(objhdr-y) $(generic-y)
+input-files := $(addprefix $(_src)/,$(header-y)) \
$(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+
output-files := $(addprefix $(install)/, $(all-files))
# Work out what needs to be removed
@@ -47,8 +55,12 @@ quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
cmd_install = \
$(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
$(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+ for F in $(wrapper-files); do \
+ echo "\#include <asm-generic/$$F>" > $(install)/$$F; \
+ done; \
touch $@
+
quiet_cmd_remove = REMOVE $(unwanted)
cmd_remove = rm -f $(unwanted-file)
@@ -69,7 +81,8 @@ __headersinst: $(subdirs) $(install-file)
@:
targets += $(install-file)
-$(install-file): scripts/headers_install.pl $(input-files) FORCE
+$(install-file): scripts/headers_install.pl \
+ $(input-files) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
diff --git a/scripts/asm-generic.sh b/scripts/asm-generic.sh
new file mode 100644
index 0000000..bc04f08
--- /dev/null
+++ b/scripts/asm-generic.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# include/asm-generic contains a lot of files that are used
+# verbatim by several architectures.
+#
+# This scripts read the file arch/$(ARCH)/include/asm/Kbuild
+# and for each file listed in this file with generic-y create
+# a small wrapper file in arch/$(ARCH)/include/generated/
+
+# read list of header files form Kbuild
+# The file has make syntax which looks like this:
+#
+# generic-y += <filename>
+files=$( cat ${srctree}/arch/$1/include/asm/Kbuild | \
+ grep -v ^# | grep generic-y | cut -d '=' -f 2)
+
+gendir=arch/$1/include/generated/asm
+mkdir -p ${gendir}
+
+# create include files for each file used form asm-generic
+for F in ${files}; do
+ echo "#include <asm-generic/$F>" > ${gendir}/$F
+done
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
