Now that we've got a generic perf-events based oprofile backend we might as well make use of it seeing as SH doesn't do anything special with its oprofile backend. Also introduce a new CONFIG_HW_PERF_EVENTS symbol so that we can fallback to using the timer interrupt for oprofile if the CPU doesn't support perf events. Also, to avoid a section mismatch warning we need to annotate oprofile_arch_exit() with an __exit marker. Signed-off-by: Matt Fleming <matt@xxxxxxxxxxxxxxxxx> Acked-by: Paul Mundt <lethal@xxxxxxxxxxxx> --- arch/sh/Kconfig | 13 +++++ arch/sh/oprofile/Makefile | 4 ++ arch/sh/oprofile/common.c | 115 +++++++++----------------------------------- arch/sh/oprofile/op_impl.h | 33 ------------- 4 files changed, 40 insertions(+), 125 deletions(-) delete mode 100644 arch/sh/oprofile/op_impl.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 33990fa..35b6c3f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -249,6 +249,11 @@ config ARCH_SHMOBILE select PM select PM_RUNTIME +config CPU_HAS_PMU + depends on CPU_SH4 || CPU_SH4A + default y + bool + if SUPERH32 choice @@ -738,6 +743,14 @@ config GUSA_RB LLSC, this should be more efficient than the other alternative of disabling interrupts around the atomic sequence. +config HW_PERF_EVENTS + bool "Enable hardware performance counter support for perf events" + depends on PERF_EVENTS && CPU_HAS_PMU + default y + help + Enable hardware performance counter support for perf events. If + disabled, perf events will use software events only. + source "drivers/sh/Kconfig" endmenu diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 4886c5c..e85aae7 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -6,4 +6,8 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) +ifeq ($(CONFIG_HW_PERF_EVENTS),y) +DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o) +endif + oprofile-y := $(DRIVER_OBJS) common.o backtrace.o diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index ac60493..e10d893 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -17,114 +17,45 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/perf_event.h> #include <asm/processor.h> -#include "op_impl.h" - -static struct op_sh_model *model; - -static struct op_counter_config ctr[20]; +#ifdef CONFIG_HW_PERF_EVENTS extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth); -static int op_sh_setup(void) -{ - /* Pre-compute the values to stuff in the hardware registers. */ - model->reg_setup(ctr); - - /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, NULL, 1); - - return 0; -} - -static int op_sh_create_files(struct super_block *sb, struct dentry *root) +char *op_name_from_perf_id(void) { - int i, ret = 0; + const char *pmu; + char buf[20]; + int size; - for (i = 0; i < model->num_counters; i++) { - struct dentry *dir; - char buf[4]; + pmu = perf_pmu_name(); + if (!pmu) + return NULL; - snprintf(buf, sizeof(buf), "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); + size = snprintf(buf, sizeof(buf), "sh/%s", pmu); + if (size > -1 && size < sizeof(buf)) + return buf; - ret |= oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - ret |= oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - ret |= oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - ret |= oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - - if (model->create_files) - ret |= model->create_files(sb, dir); - else - ret |= oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - - /* Dummy entries */ - ret |= oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); - } - - return ret; + return NULL; } -static int op_sh_start(void) +int __init oprofile_arch_init(struct oprofile_operations *ops) { - /* Enable performance monitoring for all counters. */ - on_each_cpu(model->cpu_start, NULL, 1); + ops->backtrace = sh_backtrace; - return 0; + return oprofile_perf_init(ops); } -static void op_sh_stop(void) +void __exit oprofile_arch_exit(void) { - /* Disable performance monitoring for all counters. */ - on_each_cpu(model->cpu_stop, NULL, 1); + oprofile_perf_exit(); } - +#else int __init oprofile_arch_init(struct oprofile_operations *ops) { - struct op_sh_model *lmodel = NULL; - int ret; - - /* - * Always assign the backtrace op. If the counter initialization - * fails, we fall back to the timer which will still make use of - * this. - */ - ops->backtrace = sh_backtrace; - - /* - * XXX - * - * All of the SH7750/SH-4A counters have been converted to perf, - * this infrastructure hook is left for other users until they've - * had a chance to convert over, at which point all of this - * will be deleted. - */ - - if (!lmodel) - return -ENODEV; - if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER)) - return -ENODEV; - - ret = lmodel->init(); - if (unlikely(ret != 0)) - return ret; - - model = lmodel; - - ops->setup = op_sh_setup; - ops->create_files = op_sh_create_files; - ops->start = op_sh_start; - ops->stop = op_sh_stop; - ops->cpu_type = lmodel->cpu_type; - - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", - lmodel->cpu_type); - - return 0; -} - -void oprofile_arch_exit(void) -{ - if (model && model->exit) - model->exit(); + pr_info("oprofile: hardware counters not available\n"); + return -ENODEV; } +void __exit oprofile_arch_exit(void) {} +#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h deleted file mode 100644 index 1244479..0000000 --- a/arch/sh/oprofile/op_impl.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __OP_IMPL_H -#define __OP_IMPL_H - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long enabled; - unsigned long event; - - unsigned long count; - - /* Dummy values for userspace tool compliance */ - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; -}; - -/* Per-architecture configury and hooks. */ -struct op_sh_model { - void (*reg_setup)(struct op_counter_config *); - int (*create_files)(struct super_block *sb, struct dentry *dir); - void (*cpu_setup)(void *dummy); - int (*init)(void); - void (*exit)(void); - void (*cpu_start)(void *args); - void (*cpu_stop)(void *args); - char *cpu_type; - unsigned char num_counters; -}; - -/* arch/sh/oprofile/common.c */ -extern void sh_backtrace(struct pt_regs * const regs, unsigned int depth); - -#endif /* __OP_IMPL_H */ -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html