From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> This introduce memblock.current_limit which is used to limit allocations from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE). The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still be used with memblock_alloc_base() to allocate really anywhere. It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears. Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I strongly recommend that you ensure that you set an appropriate limit during boot in order to guarantee that an memblock_alloc() at any time results in something that is accessible with a simple __va(). The reason is that a subsequent patch will introduce the ability for the array to resize itself by reallocating itself. The MEMBLOCK core will honor the current limit when performing those allocations. Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> --- arch/microblaze/include/asm/memblock.h | 3 --- arch/powerpc/include/asm/memblock.h | 7 ------- arch/powerpc/kernel/prom.c | 20 +++++++++++++++++++- arch/powerpc/kernel/setup_32.c | 2 +- arch/powerpc/mm/40x_mmu.c | 5 +++-- arch/powerpc/mm/fsl_booke_mmu.c | 3 ++- arch/powerpc/mm/hash_utils_64.c | 3 ++- arch/powerpc/mm/init_32.c | 29 +++++++---------------------- arch/powerpc/mm/ppc_mmu_32.c | 3 +-- arch/powerpc/mm/tlb_nohash.c | 2 ++ arch/sh/include/asm/memblock.h | 2 -- arch/sparc/include/asm/memblock.h | 2 -- include/linux/memblock.h | 16 +++++++++++++++- mm/memblock.c | 19 +++++++++++-------- 14 files changed, 63 insertions(+), 53 deletions(-) diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h index f9c2fa3..20a8e25 100644 --- a/arch/microblaze/include/asm/memblock.h +++ b/arch/microblaze/include/asm/memblock.h @@ -9,9 +9,6 @@ #ifndef _ASM_MICROBLAZE_MEMBLOCK_H #define _ASM_MICROBLAZE_MEMBLOCK_H -/* MEMBLOCK limit is OFF */ -#define MEMBLOCK_REAL_LIMIT 0xFFFFFFFF - #endif /* _ASM_MICROBLAZE_MEMBLOCK_H */ diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h index 3c29728..43efc34 100644 --- a/arch/powerpc/include/asm/memblock.h +++ b/arch/powerpc/include/asm/memblock.h @@ -5,11 +5,4 @@ #define MEMBLOCK_DBG(fmt...) udbg_printf(fmt) -#ifdef CONFIG_PPC32 -extern phys_addr_t lowmem_end_addr; -#define MEMBLOCK_REAL_LIMIT lowmem_end_addr -#else -#define MEMBLOCK_REAL_LIMIT 0 -#endif - #endif /* _ASM_POWERPC_MEMBLOCK_H */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 9d39539..f665d1b 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -98,7 +98,7 @@ static void __init move_device_tree(void) if ((memory_limit && (start + size) > memory_limit) || overlaps_crashkernel(start, size)) { - p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size)); + p = __va(memblock_alloc(size, PAGE_SIZE)); memcpy(p, initial_boot_params, size); initial_boot_params = (struct boot_param_header *)p; DBG("Moved device tree to 0x%p\n", p); @@ -655,6 +655,21 @@ static void __init phyp_dump_reserve_mem(void) static inline void __init phyp_dump_reserve_mem(void) {} #endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ +static void set_boot_memory_limit(void) +{ +#ifdef CONFIG_PPC32 + /* 601 can only access 16MB at the moment */ + if (PVR_VER(mfspr(SPRN_PVR)) == 1) + memblock_set_current_limit(0x01000000); + /* 8xx can only access 8MB at the moment */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) + memblock_set_current_limit(0x00800000); + else + memblock_set_current_limit(0x10000000); +#else + memblock_set_current_limit(memblock.rmo_size); +#endif +} void __init early_init_devtree(void *params) { @@ -683,6 +698,7 @@ void __init early_init_devtree(void *params) /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); + of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); @@ -718,6 +734,8 @@ void __init early_init_devtree(void *params) DBG("Phys. mem: %llx\n", memblock_phys_mem_size()); + set_boot_memory_limit(); + /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ move_device_tree(); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index a10ffc8..b7eb1de 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -246,7 +246,7 @@ static void __init irqstack_early_init(void) unsigned int i; /* interrupt stacks must be in lowmem, we get that for free on ppc32 - * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ + * as the memblock is limited to lowmem by default */ for_each_possible_cpu(i) { softirq_ctx[i] = (struct thread_info *) __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 1dc2fa5..58969b5 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/memblock.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -47,6 +48,7 @@ #include <asm/bootx.h> #include <asm/machdep.h> #include <asm/setup.h> + #include "mmu_decl.h" extern int __map_without_ltlbs; @@ -139,8 +141,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top) * coverage with normal-sized pages (or other reasons) do not * attempt to allocate outside the allowed range. */ - - __initial_memory_limit_addr = memstart_addr + mapped; + memblock_set_current_limit(memstart_addr + mapped); return mapped; } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index cdc7526..e525f86 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -40,6 +40,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/memblock.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -212,5 +213,5 @@ void __init adjust_total_lowmem(void) pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20, (unsigned int)((total_lowmem - __max_low_memory) >> 20)); - __initial_memory_limit_addr = memstart_addr + __max_low_memory; + memblock_set_current_limit(memstart_addr + __max_low_memory); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c630b4f..79f9445 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -696,7 +696,8 @@ static void __init htab_initialize(void) #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); - } + } + memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE); /* * If we have a memory_limit and we've allocated TCEs then we need to diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 6a6975d..59b208b 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -92,12 +92,6 @@ int __allow_ioremap_reserved; unsigned long __max_low_memory = MAX_LOW_MEM; /* - * address of the limit of what is accessible with initial MMU setup - - * 256MB usually, but only 16MB on 601. - */ -phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000; - -/* * Check for command-line options that affect what MMU_init will do. */ void MMU_setup(void) @@ -126,13 +120,6 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:enter", 0x111); - /* 601 can only access 16MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 1) - __initial_memory_limit_addr = 0x01000000; - /* 8xx can only access 8MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - __initial_memory_limit_addr = 0x00800000; - /* parse args from command line */ MMU_setup(); @@ -190,20 +177,18 @@ void __init MMU_init(void) #ifdef CONFIG_BOOTX_TEXT btext_unmap(); #endif + + /* Shortly after that, the entire linear mapping will be available */ + memblock_set_current_limit(lowmem_end_addr); } /* This is only called until mem_init is done. */ void __init *early_get_page(void) { - void *p; - - if (init_bootmem_done) { - p = alloc_bootmem_pages(PAGE_SIZE); - } else { - p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, - __initial_memory_limit_addr)); - } - return p; + if (init_bootmem_done) + return alloc_bootmem_pages(PAGE_SIZE); + else + return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); } /* Free up now-unused memory */ diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index f8a0182..7d34e17 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -223,8 +223,7 @@ void __init MMU_init_hw(void) * Find some memory for the hash table. */ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); - Hash = __va(memblock_alloc_base(Hash_size, Hash_size, - __initial_memory_limit_addr)); + Hash = __va(memblock_alloc(Hash_size, Hash_size)); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index d8695b0..7ba32e7 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -432,6 +432,8 @@ static void __early_init_mmu(int boot_cpu) * the MMU configuration */ mb(); + + memblock_set_current_limit(linear_map_top); } void __init early_init_mmu(void) diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h index dfe683b..e87063f 100644 --- a/arch/sh/include/asm/memblock.h +++ b/arch/sh/include/asm/memblock.h @@ -1,6 +1,4 @@ #ifndef __ASM_SH_MEMBLOCK_H #define __ASM_SH_MEMBLOCK_H -#define MEMBLOCK_REAL_LIMIT 0 - #endif /* __ASM_SH_MEMBLOCK_H */ diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h index f12af88..c67b047 100644 --- a/arch/sparc/include/asm/memblock.h +++ b/arch/sparc/include/asm/memblock.h @@ -5,6 +5,4 @@ #define MEMBLOCK_DBG(fmt...) prom_printf(fmt) -#define MEMBLOCK_REAL_LIMIT 0 - #endif /* !(_SPARC64_MEMBLOCK_H) */ diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 5853752..aabdcdd 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -34,6 +34,7 @@ struct memblock_type { struct memblock { unsigned long debug; u64 rmo_size; + u64 current_limit; struct memblock_type memory; struct memblock_type reserved; }; @@ -46,11 +47,16 @@ extern long memblock_add(u64 base, u64 size); extern long memblock_remove(u64 base, u64 size); extern long __init memblock_free(u64 base, u64 size); extern long __init memblock_reserve(u64 base, u64 size); + extern u64 __init memblock_alloc_nid(u64 size, u64 align, int nid); extern u64 __init memblock_alloc(u64 size, u64 align); + +/* Flags for memblock_alloc_base() amd __memblock_alloc_base() */ +#define MEMBLOCK_ALLOC_ANYWHERE (~(u64)0) +#define MEMBLOCK_ALLOC_ACCESSIBLE 0 + extern u64 __init memblock_alloc_base(u64 size, u64, u64 max_addr); -#define MEMBLOCK_ALLOC_ANYWHERE 0 extern u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr); extern u64 __init memblock_phys_mem_size(void); @@ -64,6 +70,14 @@ extern void memblock_dump_all(void); /* Provided by the architecture */ extern u64 memblock_nid_range(u64 start, u64 end, int *nid); +/** + * memblock_set_current_limit - Set the current allocation limit to allow + * limiting allocations to what is currently + * accessible during boot + * @limit: New limit value (physical address) + */ +extern void memblock_set_current_limit(u64 limit); + /* * pfn conversion functions diff --git a/mm/memblock.c b/mm/memblock.c index 0ad7626..cdb35ba 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -115,6 +115,8 @@ void __init memblock_init(void) memblock.reserved.regions[0].base = 0; memblock.reserved.regions[0].size = 0; memblock.reserved.cnt = 1; + + memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE; } void __init memblock_analyze(void) @@ -373,7 +375,7 @@ u64 __init memblock_alloc_nid(u64 size, u64 align, int nid) u64 __init memblock_alloc(u64 size, u64 align) { - return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); + return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); } u64 __init memblock_alloc_base(u64 size, u64 align, u64 max_addr) @@ -399,14 +401,9 @@ u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr) size = memblock_align_up(size, align); - /* On some platforms, make sure we allocate lowmem */ - /* Note that MEMBLOCK_REAL_LIMIT may be MEMBLOCK_ALLOC_ANYWHERE */ - if (max_addr == MEMBLOCK_ALLOC_ANYWHERE) - max_addr = MEMBLOCK_REAL_LIMIT; - /* Pump up max_addr */ - if (max_addr == MEMBLOCK_ALLOC_ANYWHERE) - max_addr = ~(u64)0; + if (max_addr == MEMBLOCK_ALLOC_ACCESSIBLE) + max_addr = memblock.current_limit; /* We do a top-down search, this tends to limit memory * fragmentation by keeping early boot allocs near the @@ -501,3 +498,9 @@ int memblock_is_region_reserved(u64 base, u64 size) return memblock_overlaps_region(&memblock.reserved, base, size); } + +void __init memblock_set_current_limit(u64 limit) +{ + memblock.current_limit = limit; +} + -- 1.6.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html