On Tue, Jun 15, 2010 at 12:10:53PM +0100, Catalin Marinas wrote: > On Sat, 2010-06-12 at 02:30 +0100, Robert Hancock wrote: > > > So if that's the API for the above case and we are strictly referring to > > > the sata_sil24 patch I sent - shouldn't we just add wmb() in the driver > > > between the write to the DMA buffer and the writel() to start the DMA > > > transfer? Do we need to move the wmb() to the writel() macro? > > > > I think it would be best if writel, etc. did the write buffer flushing > > by default. As Nick said, if there are some performance critical areas > > then those can use the relaxed versions but it's safest if the default > > behavior works as drivers expect. > > I went through the past discussion pointed to by Fujita (thanks!) but I > wouldn't say it resulted in a definitive guideline on how architectures > should implement the I/O accessors. > > >From an ARM perspective, I would prefer to add wmb() in the drivers > where it matters - basically only those using DMA coherent buffers. A > lot of drivers already have this in place and that's already documented > in DMA-API.txt (maybe with a bit of clarification). > > Some statistics - grepping drivers/ for alloc_coherent shows 285 files. > Of these, 69 already use barriers. It's not trivial to go through 200+ > drivers and add barriers but I wouldn't say that's impossible. I disagree. Firstly, you will get subtle bugs, not able to be reproduced and situations where driver writers don't even have that architecture to test on. Secondly, it is not a one-time audit and be done with it, code is constantly being changed and added. Driver code is going to be written and tested and run on different archs or even different implementations that do different things to ordering. On the other hand, a performance slowdown should be far more reproducible and traceable. > If we go the other route of adding mb() in writel() (though I don't > prefer it), there are two additional issues: > > (1) how relaxed would the "writel_relaxed" etc. accessors be? Are they > relaxed only with regards to coherent DMA buffers or relaxed with other > I/O operations as well? Can the compiler reorder them? That was up for debate. I think totally weak (like SMP ordering) should be fine, but that may require that we need some more barriers like io_wmb() (which just orders two writels from the same CPU). Remember we want to restrict their use outside critical fastpaths of important drivers -- this is a far smaller task than auditing all accesses in all drivers. > (2) do we go through all the drivers that currently have *mb() and > remove them? A quick grep in drivers/ shows over 1600 occurrences of > *mb(). No need, but the ones that matter will get updated slowly. The ones that don't will continue to work (from an ordering point of view) on obscure or untested hardware. -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html