The MTD headers traditionally use stdint types rather than
the kernel integer types. This converts them to do the
same as all the others.
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
include/linux/jffs2.h | 26 ++++++++--------
include/mtd/inftl-user.h | 36 ++++++++++++------------
include/mtd/jffs2-user.h | 4 +-
include/mtd/mtd-abi.h | 64 +++++++++++++++++++++---------------------
include/mtd/nftl-user.h | 30 ++++++++++----------
include/mtd/ubi-user.h | 70 +++++++++++++++++++++++-----------------------
6 files changed, 115 insertions(+), 115 deletions(-)
Index: linux-2.6/include/linux/jffs2.h
===================================================================
--- linux-2.6.orig/include/linux/jffs2.h
+++ linux-2.6/include/linux/jffs2.h
@@ -12,6 +12,7 @@
#ifndef __LINUX_JFFS2_H__
#define __LINUX_JFFS2_H__
+#include <linux/types.h>
#include <linux/magic.h>
/* You must include something which defines the C99 uintXX_t types.
@@ -91,15 +92,15 @@
byteswapping */
typedef struct {
- uint32_t v32;
+ __u32 v32;
} __attribute__((packed)) jint32_t;
typedef struct {
- uint32_t m;
+ __u32 m;
} __attribute__((packed)) jmode_t;
typedef struct {
- uint16_t v16;
+ __u16 v16;
} __attribute__((packed)) jint16_t;
struct jffs2_unknown_node
@@ -121,12 +122,12 @@ struct jffs2_raw_dirent
jint32_t version;
jint32_t ino; /* == zero for unlink */
jint32_t mctime;
- uint8_t nsize;
- uint8_t type;
- uint8_t unused[2];
+ __u8 nsize;
+ __u8 type;
+ __u8 unused[2];
jint32_t node_crc;
jint32_t name_crc;
- uint8_t name[0];
+ __u8 name[0];
};
/* The JFFS2 raw inode structure: Used for storage on physical media. */
@@ -153,12 +154,12 @@ struct jffs2_raw_inode
jint32_t offset; /* Where to begin to write. */
jint32_t csize; /* (Compressed) data size */
jint32_t dsize; /* Size of the node's data. (after decompression) */
- uint8_t compr; /* Compression algorithm used */
- uint8_t usercompr; /* Compression algorithm requested by the user */
+ __u8 compr; /* Compression algorithm used */
+ __u8 usercompr; /* Compression algorithm requested by the user */
jint16_t flags; /* See JFFS2_INO_FLAG_* */
jint32_t data_crc; /* CRC for the (compressed) data. */
jint32_t node_crc; /* CRC for the raw inode (excluding data) */
- uint8_t data[0];
+ __u8 data[0];
};
struct jffs2_raw_xattr {
@@ -168,12 +169,12 @@ struct jffs2_raw_xattr {
jint32_t hdr_crc;
jint32_t xid; /* XATTR identifier number */
jint32_t version;
- uint8_t xprefix;
- uint8_t name_len;
+ __u8 xprefix;
+ __u8 name_len;
jint16_t value_len;
jint32_t data_crc;
jint32_t node_crc;
- uint8_t data[0];
+ __u8 data[0];
} __attribute__((packed));
struct jffs2_raw_xref
Index: linux-2.6/include/mtd/inftl-user.h
===================================================================
--- linux-2.6.orig/include/mtd/inftl-user.h
+++ linux-2.6/include/mtd/inftl-user.h
@@ -16,33 +16,33 @@
/* Block Control Information */
struct inftl_bci {
- uint8_t ECCsig[6];
- uint8_t Status;
- uint8_t Status1;
+ __u8 ECCsig[6];
+ __u8 Status;
+ __u8 Status1;
} __attribute__((packed));
struct inftl_unithead1 {
- uint16_t virtualUnitNo;
- uint16_t prevUnitNo;
- uint8_t ANAC;
- uint8_t NACs;
- uint8_t parityPerField;
- uint8_t discarded;
+ __u16 virtualUnitNo;
+ __u16 prevUnitNo;
+ __u8 ANAC;
+ __u8 NACs;
+ __u8 parityPerField;
+ __u8 discarded;
} __attribute__((packed));
struct inftl_unithead2 {
- uint8_t parityPerField;
- uint8_t ANAC;
- uint16_t prevUnitNo;
- uint16_t virtualUnitNo;
- uint8_t NACs;
- uint8_t discarded;
+ __u8 parityPerField;
+ __u8 ANAC;
+ __u16 prevUnitNo;
+ __u16 virtualUnitNo;
+ __u8 NACs;
+ __u8 discarded;
} __attribute__((packed));
struct inftl_unittail {
- uint8_t Reserved[4];
- uint16_t EraseMark;
- uint16_t EraseMark1;
+ __u8 Reserved[4];
+ __u16 EraseMark;
+ __u16 EraseMark1;
} __attribute__((packed));
union inftl_uci {
Index: linux-2.6/include/mtd/jffs2-user.h
===================================================================
--- linux-2.6.orig/include/mtd/jffs2-user.h
+++ linux-2.6/include/mtd/jffs2-user.h
@@ -7,6 +7,7 @@
/* This file is blessed for inclusion by userspace */
#include <linux/jffs2.h>
+#include <linux/types.h>
#include <endian.h>
#include <byteswap.h>
@@ -19,8 +20,8 @@
extern int target_endian;
-#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
-#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
+#define t16(x) ({ __u16 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
+#define t32(x) ({ __u32 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
#define cpu_to_je16(x) ((jint16_t){t16(x)})
#define cpu_to_je32(x) ((jint32_t){t32(x)})
Index: linux-2.6/include/mtd/mtd-abi.h
===================================================================
--- linux-2.6.orig/include/mtd/mtd-abi.h
+++ linux-2.6/include/mtd/mtd-abi.h
@@ -5,14 +5,16 @@
#ifndef __MTD_ABI_H__
#define __MTD_ABI_H__
+#include <linux/types.h>
+
struct erase_info_user {
- uint32_t start;
- uint32_t length;
+ __u32 start;
+ __u32 length;
};
struct mtd_oob_buf {
- uint32_t start;
- uint32_t length;
+ __u32 start;
+ __u32 length;
unsigned char __user *ptr;
};
@@ -48,30 +50,30 @@ struct mtd_oob_buf {
#define MTD_OTP_USER 2
struct mtd_info_user {
- uint8_t type;
- uint32_t flags;
- uint32_t size; // Total size of the MTD
- uint32_t erasesize;
- uint32_t writesize;
- uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
+ __u8 type;
+ __u32 flags;
+ __u32 size; // Total size of the MTD
+ __u32 erasesize;
+ __u32 writesize;
+ __u32 oobsize; // Amount of OOB data per block (e.g. 16)
/* The below two fields are obsolete and broken, do not use them
* (TODO: remove at some point) */
- uint32_t ecctype;
- uint32_t eccsize;
+ __u32 ecctype;
+ __u32 eccsize;
};
struct region_info_user {
- uint32_t offset; /* At which this region starts,
+ __u32 offset; /* At which this region starts,
* from the beginning of the MTD */
- uint32_t erasesize; /* For this region */
- uint32_t numblocks; /* Number of blocks in this region */
- uint32_t regionindex;
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
+ __u32 regionindex;
};
struct otp_info {
- uint32_t start;
- uint32_t length;
- uint32_t locked;
+ __u32 start;
+ __u32 length;
+ __u32 locked;
};
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
@@ -99,15 +101,15 @@ struct otp_info {
* interfaces
*/
struct nand_oobinfo {
- uint32_t useecc;
- uint32_t eccbytes;
- uint32_t oobfree[8][2];
- uint32_t eccpos[32];
+ __u32 useecc;
+ __u32 eccbytes;
+ __u32 oobfree[8][2];
+ __u32 eccpos[32];
};
struct nand_oobfree {
- uint32_t offset;
- uint32_t length;
+ __u32 offset;
+ __u32 length;
};
#define MTD_MAX_OOBFREE_ENTRIES 8
@@ -116,9 +118,9 @@ struct nand_oobfree {
* diagnosis and to allow creation of raw images
*/
struct nand_ecclayout {
- uint32_t eccbytes;
- uint32_t eccpos[64];
- uint32_t oobavail;
+ __u32 eccbytes;
+ __u32 eccpos[64];
+ __u32 oobavail;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
};
@@ -131,10 +133,10 @@ struct nand_ecclayout {
* @bbtblocks: number of blocks reserved for bad block tables
*/
struct mtd_ecc_stats {
- uint32_t corrected;
- uint32_t failed;
- uint32_t badblocks;
- uint32_t bbtblocks;
+ __u32 corrected;
+ __u32 failed;
+ __u32 badblocks;
+ __u32 bbtblocks;
};
/*
Index: linux-2.6/include/mtd/nftl-user.h
===================================================================
--- linux-2.6.orig/include/mtd/nftl-user.h
+++ linux-2.6/include/mtd/nftl-user.h
@@ -6,33 +6,35 @@
#ifndef __MTD_NFTL_USER_H__
#define __MTD_NFTL_USER_H__
+#include <linux/types.h>
+
/* Block Control Information */
struct nftl_bci {
unsigned char ECCSig[6];
- uint8_t Status;
- uint8_t Status1;
+ __u8 Status;
+ __u8 Status1;
}__attribute__((packed));
/* Unit Control Information */
struct nftl_uci0 {
- uint16_t VirtUnitNum;
- uint16_t ReplUnitNum;
- uint16_t SpareVirtUnitNum;
- uint16_t SpareReplUnitNum;
+ __u16 VirtUnitNum;
+ __u16 ReplUnitNum;
+ __u16 SpareVirtUnitNum;
+ __u16 SpareReplUnitNum;
} __attribute__((packed));
struct nftl_uci1 {
- uint32_t WearInfo;
- uint16_t EraseMark;
- uint16_t EraseMark1;
+ __u32 WearInfo;
+ __u16 EraseMark;
+ __u16 EraseMark1;
} __attribute__((packed));
struct nftl_uci2 {
- uint16_t FoldMark;
- uint16_t FoldMark1;
- uint32_t unused;
+ __u16 FoldMark;
+ __u16 FoldMark1;
+ __u32 unused;
} __attribute__((packed));
union nftl_uci {
@@ -50,9 +52,9 @@ struct nftl_oob {
struct NFTLMediaHeader {
char DataOrgID[6];
- uint16_t NumEraseUnits;
- uint16_t FirstPhysicalEUN;
- uint32_t FormattedSize;
+ __u16 NumEraseUnits;
+ __u16 FirstPhysicalEUN;
+ __u32 FormattedSize;
unsigned char UnitSizeFactor;
} __attribute__((packed));
Index: linux-2.6/include/mtd/ubi-user.h
===================================================================
--- linux-2.6.orig/include/mtd/ubi-user.h
+++ linux-2.6/include/mtd/ubi-user.h
@@ -21,6 +21,8 @@
#ifndef __UBI_USER_H__
#define __UBI_USER_H__
+#include <linux/types.h>
+
/*
* UBI device creation (the same as MTD device attachment)
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -152,7 +154,7 @@
/* Create an UBI volume */
#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
/* Remove an UBI volume */
-#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
/* Re-size an UBI volume */
#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
/* Re-name volumes */
@@ -165,24 +167,24 @@
/* Attach an MTD device */
#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
/* Detach an MTD device */
-#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t)
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
/* ioctl commands of UBI volume character devices */
#define UBI_VOL_IOC_MAGIC 'O'
/* Start UBI volume update */
-#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
/* LEB erasure command, used for debugging, disabled by default */
-#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
/* Atomic LEB change command */
-#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
/* Map LEB command */
#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
/* Unmap LEB command */
-#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t)
+#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
/* Check if LEB is mapped command */
-#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t)
+#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
/* Set an UBI volume property */
#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req)
@@ -260,10 +262,10 @@ enum {
* sub-page of the first page and add needed padding.
*/
struct ubi_attach_req {
- int32_t ubi_num;
- int32_t mtd_num;
- int32_t vid_hdr_offset;
- int8_t padding[12];
+ __s32 ubi_num;
+ __s32 mtd_num;
+ __s32 vid_hdr_offset;
+ __s8 padding[12];
};
/**
@@ -298,13 +300,13 @@ struct ubi_attach_req {
* BLOBs, without caring about how to properly align them.
*/
struct ubi_mkvol_req {
- int32_t vol_id;
- int32_t alignment;
- int64_t bytes;
- int8_t vol_type;
- int8_t padding1;
- int16_t name_len;
- int8_t padding2[4];
+ __s32 vol_id;
+ __s32 alignment;
+ __s64 bytes;
+ __s8 vol_type;
+ __s8 padding1;
+ __s16 name_len;
+ __s8 padding2[4];
char name[UBI_MAX_VOLUME_NAME + 1];
} __attribute__ ((packed));
@@ -320,8 +322,8 @@ struct ubi_mkvol_req {
* zero number of bytes).
*/
struct ubi_rsvol_req {
- int64_t bytes;
- int32_t vol_id;
+ __s64 bytes;
+ __s32 vol_id;
} __attribute__ ((packed));
/**
@@ -356,12 +358,12 @@ struct ubi_rsvol_req {
* re-name request.
*/
struct ubi_rnvol_req {
- int32_t count;
- int8_t padding1[12];
+ __s32 count;
+ __s8 padding1[12];
struct {
- int32_t vol_id;
- int16_t name_len;
- int8_t padding2[2];
+ __s32 vol_id;
+ __s16 name_len;
+ __s8 padding2[2];
char name[UBI_MAX_VOLUME_NAME + 1];
} ents[UBI_MAX_RNVOL];
} __attribute__ ((packed));
@@ -375,10 +377,10 @@ struct ubi_rnvol_req {
* @padding: reserved for future, not used, has to be zeroed
*/
struct ubi_leb_change_req {
- int32_t lnum;
- int32_t bytes;
- int8_t dtype;
- int8_t padding[7];
+ __s32 lnum;
+ __s32 bytes;
+ __s8 dtype;
+ __s8 padding[7];
} __attribute__ ((packed));
/**
@@ -388,9 +390,9 @@ struct ubi_leb_change_req {
* @padding: reserved for future, not used, has to be zeroed
*/
struct ubi_map_req {
- int32_t lnum;
- int8_t dtype;
- int8_t padding[3];
+ __s32 lnum;
+ __s8 dtype;
+ __s8 padding[3];
} __attribute__ ((packed));
@@ -402,9 +404,9 @@ struct ubi_map_req {
* @value: value to set
*/
struct ubi_set_prop_req {
- uint8_t property;
- uint8_t padding[7];
- uint64_t value;
+ __u8 property;
+ __u8 padding[7];
+ __u64 value;
} __attribute__ ((packed));
#endif /* __UBI_USER_H__ */
--
--
To unsubscribe from this list: send the line "unsubscribe linux-arch" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
