From: Michal Simek <monstr@xxxxxxxxx> Signed-off-by: Michal Simek <monstr@xxxxxxxxx> --- arch/microblaze/kernel/prom.c | 1653 ++++++++++++++++++++++++++++++++++ include/asm-microblaze/of_device.h | 41 + include/asm-microblaze/of_platform.h | 45 + include/asm-microblaze/prom.h | 311 +++++++ 4 files changed, 2050 insertions(+), 0 deletions(-) create mode 100644 arch/microblaze/kernel/prom.c create mode 100644 include/asm-microblaze/of_device.h create mode 100644 include/asm-microblaze/of_platform.h create mode 100644 include/asm-microblaze/prom.h diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c new file mode 100644 index 0000000..7c9793a --- /dev/null +++ b/arch/microblaze/kernel/prom.c @@ -0,0 +1,1653 @@ +/* + * Procedures for creating, accessing and interpreting the device tree. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <stdarg.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/stringify.h> +#include <linux/delay.h> +#include <linux/initrd.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/kexec.h> +#include <linux/debugfs.h> +#include <linux/irq.h> +#include <linux/lmb.h> + +#include <asm/prom.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/mmu.h> +#include <asm/pgtable.h> +#include <asm/pci.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> + +#ifdef CONFIG_PPC_PSERIES +#include <asm/rtas.h> +#include <asm/kdump.h> +#include <asm/smp.h> +#include <asm/iommu.h> +#include <asm/btext.h> +#include <asm/machdep.h> +#include <asm/pSeries_reconfig.h> +#include <asm/phyp_dump.h> +#include <asm/kexec.h> +#endif + +static int __initdata dt_root_addr_cells; +static int __initdata dt_root_size_cells; + +#ifdef CONFIG_PPC64 +int __initdata iommu_is_off; +int __initdata iommu_force_on; +unsigned long tce_alloc_start, tce_alloc_end; +#endif + +typedef u32 cell_t; + +#if 0 +static struct boot_param_header *initial_boot_params __initdata; +#else +struct boot_param_header *initial_boot_params; +#endif + +extern struct device_node *allnodes; /* temporary while merging */ + +extern rwlock_t devtree_lock; /* temporary while merging */ + +/* export that to outside world */ +struct device_node *of_chosen; + +static inline char *find_flat_dt_string(u32 offset) +{ + return ((char *)initial_boot_params) + + initial_boot_params->off_dt_strings + offset; +} + +/** + * This function is used to scan the flattened device-tree, it is + * used to extract the memory informations at boot before we can + * unflatten the tree + */ +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + int rc = 0; + int depth = -1; + + do { + u32 tag = *((u32 *)p); + char *pathp; + + p += 4; + if (tag == OF_DT_END_NODE) { + depth--; + continue; + } + if (tag == OF_DT_NOP) + continue; + if (tag == OF_DT_END) + break; + if (tag == OF_DT_PROP) { + u32 sz = *((u32 *)p); + p += 8; + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + p += sz; + p = _ALIGN(p, 4); + continue; + } + if (tag != OF_DT_BEGIN_NODE) { + printk(KERN_WARNING "Invalid tag %x scanning flattened" + " device tree !\n", tag); + return -EINVAL; + } + depth++; + pathp = (char *)p; + p = _ALIGN(p + strlen(pathp) + 1, 4); + if ((*pathp) == '/') { + char *lp, *np; + for (lp = NULL, np = pathp; *np; np++) + if ((*np) == '/') + lp = np+1; + if (lp != NULL) + pathp = lp; + } + rc = it(p, pathp, depth, data); + if (rc != 0) + break; + } while (1); + + return rc; +} + +unsigned long __init of_get_flat_dt_root(void) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + + while (*((u32 *)p) == OF_DT_NOP) + p += 4; + BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE); + p += 4; + return _ALIGN(p + strlen((char *)p) + 1, 4); +} + +/** + * This function can be used within scan_flattened_dt callback to get + * access to properties + */ +void* __init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size) +{ + unsigned long p = node; + + do { + u32 tag = *((u32 *)p); + u32 sz, noff; + const char *nstr; + + p += 4; + if (tag == OF_DT_NOP) + continue; + if (tag != OF_DT_PROP) + return NULL; + + sz = *((u32 *)p); + noff = *((u32 *)(p + 4)); + p += 8; + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); + + nstr = find_flat_dt_string(noff); + if (nstr == NULL) { + printk(KERN_WARNING "Can't find property index" + " name !\n"); + return NULL; + } + if (strcmp(name, nstr) == 0) { + if (size) + *size = sz; + return (void *)p; + } + p += sz; + p = _ALIGN(p, 4); + } while (1); +} + +int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) +{ + const char *cp; + unsigned long cplen, l; + + cp = of_get_flat_dt_prop(node, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + if (strncasecmp(cp, compat, strlen(compat)) == 0) + return 1; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} + +static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, + unsigned long align) +{ + void *res; + + *mem = _ALIGN(*mem, align); + res = (void *)*mem; + *mem += size; + + return res; +} + +static unsigned long __init unflatten_dt_node(unsigned long mem, + unsigned long *p, + struct device_node *dad, + struct device_node ***allnextpp, + unsigned long fpsize) +{ + struct device_node *np; + struct property *pp, **prev_pp = NULL; + char *pathp; + u32 tag; + unsigned int l, allocl; + int has_name = 0; + int new_format = 0; + + tag = *((u32 *)(*p)); + if (tag != OF_DT_BEGIN_NODE) { + printk("Weird tag at start of node: %x\n", tag); + return mem; + } + *p += 4; + pathp = (char *)*p; + l = allocl = strlen(pathp) + 1; + *p = _ALIGN(*p + l, 4); + + /* version 0x10 has a more compact unit name here instead of the full + * path. we accumulate the full path size using "fpsize", we'll rebuild + * it later. We detect this because the first character of the name is + * not '/'. + */ + if ((*pathp) != '/') { + new_format = 1; + if (fpsize == 0) { + /* root node: special case. fpsize accounts for path + * plus terminating zero. root node only has '/', so + * fpsize should be 2, but we want to avoid the first + * level nodes to have two '/' so we use fpsize 1 here + */ + fpsize = 1; + allocl = 2; + } else { + /* account for '/' and path size minus terminal 0 + * already in 'l' + */ + fpsize += l; + allocl = fpsize; + } + } + + np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, + __alignof__(struct device_node)); + if (allnextpp) { + memset(np, 0, sizeof(*np)); + np->full_name = ((char *)np) + sizeof(struct device_node); + if (new_format) { + char *p = np->full_name; + /* rebuild full path for new format */ + if (dad && dad->parent) { + strcpy(p, dad->full_name); +#ifdef DEBUG + if ((strlen(p) + l + 1) != allocl) { + pr_debug("%s: p: %d, l: %d, a: %d\n", + pathp, (int)strlen(p), + l, allocl); + } +#endif + p += strlen(p); + } + *(p++) = '/'; + memcpy(p, pathp, l); + } else + memcpy(np->full_name, pathp, l); + prev_pp = &np->properties; + **allnextpp = np; + *allnextpp = &np->allnext; + if (dad != NULL) { + np->parent = dad; + /* we temporarily use the next field as `last_child'*/ + if (dad->next == 0) + dad->child = np; + else + dad->next->sibling = np; + dad->next = np; + } + kref_init(&np->kref); + } + while (1) { + u32 sz, noff; + char *pname; + + tag = *((u32 *)(*p)); + if (tag == OF_DT_NOP) { + *p += 4; + continue; + } + if (tag != OF_DT_PROP) + break; + *p += 4; + sz = *((u32 *)(*p)); + noff = *((u32 *)((*p) + 4)); + *p += 8; + if (initial_boot_params->version < 0x10) + *p = _ALIGN(*p, sz >= 8 ? 8 : 4); + + pname = find_flat_dt_string(noff); + if (pname == NULL) { + printk(KERN_INFO + "Can't find property name in list !\n"); + break; + } + if (strcmp(pname, "name") == 0) + has_name = 1; + l = strlen(pname) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property), + __alignof__(struct property)); + if (allnextpp) { + if (strcmp(pname, "linux,phandle") == 0) { + np->node = *((u32 *)*p); + if (np->linux_phandle == 0) + np->linux_phandle = np->node; + } + if (strcmp(pname, "ibm,phandle") == 0) + np->linux_phandle = *((u32 *)*p); + pp->name = pname; + pp->length = sz; + pp->value = (void *)*p; + *prev_pp = pp; + prev_pp = &pp->next; + } + *p = _ALIGN((*p) + sz, 4); + } + /* with version 0x10 we may not have the name property, recreate + * it here from the unit name if absent + */ + if (!has_name) { + char *p = pathp, *ps = pathp, *pa = NULL; + int sz; + + while (*p) { + if ((*p) == '@') + pa = p; + if ((*p) == '/') + ps = p + 1; + p++; + } + if (pa < ps) + pa = p; + sz = (pa - ps) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, + __alignof__(struct property)); + if (allnextpp) { + pp->name = "name"; + pp->length = sz; + pp->value = pp + 1; + *prev_pp = pp; + prev_pp = &pp->next; + memcpy(pp->value, ps, sz - 1); + ((char *)pp->value)[sz - 1] = 0; + pr_debug("fixed up name for %s -> %s\n", pathp, + (char *)pp->value); + } + } + if (allnextpp) { + *prev_pp = NULL; + np->name = of_get_property(np, "name", NULL); + np->type = of_get_property(np, "device_type", NULL); + + if (!np->name) + np->name = "<NULL>"; + if (!np->type) + np->type = "<NULL>"; + } + while (tag == OF_DT_BEGIN_NODE) { + mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); + tag = *((u32 *)(*p)); + } + if (tag != OF_DT_END_NODE) { + printk(KERN_INFO "Weird tag at end of node: %x\n", tag); + return mem; + } + *p += 4; + return mem; +} + +#ifdef CONFIG_PPC_PSERIES +static int __init early_parse_mem(char *p) +{ + if (!p) + return 1; + + memory_limit = PAGE_ALIGN(memparse(p, &p)); + pr_debug("memory limit = 0x%lx\n", memory_limit); + + return 0; +} +early_param("mem", early_parse_mem); + +/** + * move_device_tree - move tree to an unused area, if needed. + * + * The device tree may be allocated beyond our memory limit, or inside the + * crash kernel region for kdump. If so, move it out of the way. + */ +static void __init move_device_tree(void) +{ + unsigned long start, size; + void *p; + + pr_debug("-> move_device_tree\n"); + + start = __pa(initial_boot_params); + size = initial_boot_params->totalsize; + + if ((memory_limit && (start + size) > memory_limit) || + overlaps_crashkernel(start, size)) { + p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size)); + memcpy(p, initial_boot_params, size); + initial_boot_params = (struct boot_param_header *)p; + pr_debug("Moved device tree to 0x%p\n", p); + } + + pr_debug("<- move_device_tree\n"); +} +#endif + +/** + * unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used (this used to be done by finish_device_tree) + */ +void __init unflatten_device_tree(void) +{ + unsigned long start, mem, size; + struct device_node **allnextp = &allnodes; + + pr_debug(" -> unflatten_device_tree()\n"); + + /* First pass, scan for size */ + start = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + size = unflatten_dt_node(0, &start, NULL, NULL, 0); + size = (size | 3) + 1; + + pr_debug(" size is %lx, allocating...\n", size); + + /* Allocate memory for the expanded device tree */ + mem = lmb_alloc(size + 4, __alignof__(struct device_node)); + mem = (unsigned long) __va(mem); + + ((u32 *)mem)[size / 4] = 0xdeadbeef; + + pr_debug(" unflattening %lx...\n", mem); + + /* Second pass, do actual unflattening */ + start = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + unflatten_dt_node(mem, &start, NULL, &allnextp, 0); + if (*((u32 *)start) != OF_DT_END) + printk(KERN_WARNING "Weird tag at end of tree: %08x\n", + *((u32 *)start)); + if (((u32 *)mem)[size / 4] != 0xdeadbeef) + printk(KERN_WARNING "End of tree marker overwritten: %08x\n", + ((u32 *)mem)[size / 4]); + *allnextp = NULL; + + /* Get pointer to OF "/chosen" node for use everywhere */ + of_chosen = of_find_node_by_path("/chosen"); + if (of_chosen == NULL) + of_chosen = of_find_node_by_path("/chosen@0"); + + pr_debug(" <- unflatten_device_tree()\n"); +} + +#ifdef CONFIG_PPC_PSERIES +/* + * ibm,pa-features is a per-cpu property that contains a string of + * attribute descriptors, each of which has a 2 byte header plus up + * to 254 bytes worth of processor attribute bits. First header + * byte specifies the number of bytes following the header. + * Second header byte is an "attribute-specifier" type, of which + * zero is the only currently-defined value. + * Implementation: Pass in the byte and bit offset for the feature + * that we are interested in. The function will return -1 if the + * pa-features property is missing, or a 1/0 to indicate if the feature + * is supported/not supported. Note that the bit numbers are + * big-endian to match the definition in PAPR. + */ +static struct ibm_pa_feature { + unsigned long cpu_features; /* CPU_FTR_xxx bit */ + unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabit; /* bit number (big-endian) */ + unsigned char invert; /* if 1, pa bit set => clear feature */ +} ibm_pa_features[] __initdata = { + {0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, + {0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, + {CPU_FTR_SLB, 0, 0, 2, 0}, + {CPU_FTR_CTRL, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1}, + {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, + {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, +}; + +static void __init scan_features(unsigned long node, unsigned char *ftrs, + unsigned long tablelen, + struct ibm_pa_feature *fp, + unsigned long ft_size) +{ + unsigned long i, len, bit; + + /* find descriptor with type == 0 */ + for (;;) { + if (tablelen < 3) + return; + len = 2 + ftrs[0]; + if (tablelen < len) + return; /* descriptor 0 not found */ + if (ftrs[1] == 0) + break; + tablelen -= len; + ftrs += len; + } + + /* loop over bits we know about */ + for (i = 0; i < ft_size; ++i, ++fp) { + if (fp->pabyte >= ftrs[0]) + continue; + bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + if (bit ^ fp->invert) { + cur_cpu_spec->cpu_features |= fp->cpu_features; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + } else { + cur_cpu_spec->cpu_features &= ~fp->cpu_features; + cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + } + } +} + +static void __init check_cpu_pa_features(unsigned long node) +{ + unsigned char *pa_ftrs; + unsigned long tablelen; + + pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + if (pa_ftrs == NULL) + return; + + scan_features(node, pa_ftrs, tablelen, + ibm_pa_features, ARRAY_SIZE(ibm_pa_features)); +} + +#ifdef CONFIG_PPC64 +static void __init check_cpu_slb_size(unsigned long node) +{ + u32 *slb_size_ptr; + + slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL); + if (slb_size_ptr != NULL) { + mmu_slb_size = *slb_size_ptr; + } +} +#else +#define check_cpu_slb_size(node) do { } while(0) +#endif + +static struct feature_property { + const char *name; + u32 min_value; + unsigned long cpu_feature; + unsigned long cpu_user_ftr; +} feature_properties[] __initdata = { +#ifdef CONFIG_ALTIVEC + {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, + {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_PPC64 + {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP}, + {"ibm,purr", 1, CPU_FTR_PURR, 0}, + {"ibm,spurr", 1, CPU_FTR_SPURR, 0}, +#endif /* CONFIG_PPC64 */ +}; + +#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) +static inline void identical_pvr_fixup(unsigned long node) +{ + unsigned int pvr; + char *model = of_get_flat_dt_prop(node, "model", NULL); + + /* + * Since 440GR(x)/440EP(x) processors have the same pvr, + * we check the node path and set bit 28 in the cur_cpu_spec + * pvr for EP(x) processor version. This bit is always 0 in + * the "real" pvr. Then we call identify_cpu again with + * the new logical pvr to enable FPU support. + */ + if (model && strstr(model, "440EP")) { + pvr = cur_cpu_spec->pvr_value | 0x8; + identify_cpu(0, pvr); + DBG("Using logical pvr %x for %s\n", pvr, model); + } +} +#else +#define identical_pvr_fixup(node) do { } while(0) +#endif + +static void __init check_cpu_feature_properties(unsigned long node) +{ + unsigned long i; + struct feature_property *fp = feature_properties; + const u32 *prop; + + for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) { + prop = of_get_flat_dt_prop(node, fp->name, NULL); + if (prop && *prop >= fp->min_value) { + cur_cpu_spec->cpu_features |= fp->cpu_feature; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr; + } + } +} + +#endif /* CONFIG_PPC_PSERIES */ + +static int __init early_init_dt_scan_cpus(unsigned long node, + const char *uname, int depth, + void *data) +{ + static int logical_cpuid; + char *type = of_get_flat_dt_prop(node, "device_type", NULL); +#ifdef CONFIG_PPC_PSERIES + const u32 *prop; +#endif + const u32 *intserv; + int i, nthreads; + unsigned long len; + int found = 0; + + /* We are scanning "cpu" nodes only */ + if (type == NULL || strcmp(type, "cpu") != 0) + return 0; + + /* Get physical cpuid */ + intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); + if (intserv) { + nthreads = len / sizeof(int); + } else { + intserv = of_get_flat_dt_prop(node, "reg", NULL); + nthreads = 1; + } + + /* + * Now see if any of these threads match our boot cpu. + * NOTE: This must match the parsing done in smp_setup_cpu_maps. + */ + for (i = 0; i < nthreads; i++) { + /* + * version 2 of the kexec param format adds the phys cpuid of + * booted proc. + */ + if (initial_boot_params && initial_boot_params->version >= 2) { + if (intserv[i] == + initial_boot_params->boot_cpuid_phys) { + found = 1; + break; + } + } else { + /* + * Check if it's the boot-cpu, set it's hw index now, + * unfortunately this format did not support booting + * off secondary threads. + */ + if (of_get_flat_dt_prop(node, + "linux,boot-cpu", NULL) != NULL) { + found = 1; + break; + } + } + +#ifdef CONFIG_SMP + /* logical cpu id is always 0 on UP kernels */ + logical_cpuid++; +#endif + } + + if (found) { + pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid, + intserv[i]); + boot_cpuid = logical_cpuid; +#ifdef CONFIG_PPC_PSERIES + set_hard_smp_processor_id(boot_cpuid, intserv[i]); + + /* + * PAPR defines "logical" PVR values for cpus that + * meet various levels of the architecture: + * 0x0f000001 Architecture version 2.04 + * 0x0f000002 Architecture version 2.05 + * If the cpu-version property in the cpu node contains + * such a value, we call identify_cpu again with the + * logical PVR value in order to use the cpu feature + * bits appropriate for the architecture level. + * + * A POWER6 partition in "POWER6 architected" mode + * uses the 0x0f000002 PVR value; in POWER5+ mode + * it uses 0x0f000001. + */ + prop = of_get_flat_dt_prop(node, "cpu-version", NULL); + if (prop && (*prop & 0xff000000) == 0x0f000000) + identify_cpu(0, *prop); + + identical_pvr_fixup(node); +#endif + } + +#ifdef CONFIG_PPC_PSERIES + check_cpu_feature_properties(node); + check_cpu_pa_features(node); + check_cpu_slb_size(node); + + if (nthreads > 1) + cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + else + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; +#endif + return 0; +} + +#ifdef CONFIG_BLK_DEV_INITRD +static void __init early_init_dt_check_for_initrd(unsigned long node) +{ + unsigned long l; + u32 *prop; + + pr_debug("Looking for initrd properties... "); + + prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); + if (prop) { + initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4)); + + prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); + if (prop) { + initrd_end = (unsigned long) + __va(of_read_ulong(prop, l/4)); + initrd_below_start_ok = 1; + } else { + initrd_start = 0; + } + } + + pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", + initrd_start, initrd_end); +} +#else +static inline void early_init_dt_check_for_initrd(unsigned long node) +{ +} +#endif /* CONFIG_BLK_DEV_INITRD */ + +static int __init early_init_dt_scan_chosen(unsigned long node, + const char *uname, int depth, void *data) +{ + unsigned long l; + char *p; + + pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + + if (depth != 1 || + (strcmp(uname, "chosen") != 0 && + strcmp(uname, "chosen@0") != 0)) + return 0; + +#ifdef CONFIG_PPC64 + /* check if iommu is forced on or off */ + if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) + iommu_is_off = 1; + if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) + iommu_force_on = 1; +#endif + +#ifdef CONFIG_PPC_PSERIES + /* mem=x on the command line is the preferred mechanism */ + lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); + if (lprop) + memory_limit = *lprop; +#endif + +#ifdef CONFIG_PPC64 + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); + if (lprop) + tce_alloc_start = *lprop; + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); + if (lprop) + tce_alloc_end = *lprop; +#endif + +#ifdef CONFIG_KEXEC + lprop = (u64 *)of_get_flat_dt_prop(node, + "linux,crashkernel-base", NULL); + if (lprop) + crashk_res.start = *lprop; + + lprop = (u64 *)of_get_flat_dt_prop(node, + "linux,crashkernel-size", NULL); + if (lprop) + crashk_res.end = crashk_res.start + *lprop - 1; +#endif + + early_init_dt_check_for_initrd(node); + + /* Retreive command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + +#ifdef CONFIG_CMDLINE + if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + pr_debug("Command line is: %s\n", cmd_line); + + /* break now */ + return 1; +} + +static int __init early_init_dt_scan_root(unsigned long node, + const char *uname, int depth, void *data) +{ + u32 *prop; + + if (depth != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); + dt_root_size_cells = (prop == NULL) ? 1 : *prop; + pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); + + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); + dt_root_addr_cells = (prop == NULL) ? 2 : *prop; + pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); + + /* break now */ + return 1; +} + +static u64 __init dt_mem_next_cell(int s, cell_t **cellp) +{ + cell_t *p = *cellp; + + *cellp = p + s; + return of_read_number(p, s); +} + +#ifdef CONFIG_PPC_PSERIES +/* + * Interpret the ibm,dynamic-memory property in the + * /ibm,dynamic-reconfiguration-memory node. + * This contains a list of memory blocks along with NUMA affinity + * information. + */ +static int __init early_init_dt_scan_drconf_memory(unsigned long node) +{ + cell_t *dm, *ls; + unsigned long l, n, flags; + u64 base, size, lmb_size; + + ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l); + if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t)) + return 0; + lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls); + + dm = (cell_t *)of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l); + if (dm == NULL || l < sizeof(cell_t)) + return 0; + + n = *dm++; /* number of entries */ + if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t)) + return 0; + + for (; n != 0; --n) { + base = dt_mem_next_cell(dt_root_addr_cells, &dm); + flags = dm[3]; + /* skip DRC index, pad, assoc. list index, flags */ + dm += 4; + /* skip this block if the reserved bit is set in flags (0x80) + or if the block is not assigned to this partition (0x8) */ + if ((flags & 0x80) || !(flags & 0x8)) + continue; + size = lmb_size; + if (iommu_is_off) { + if (base >= 0x80000000ul) + continue; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } + lmb_add(base, size); + } + lmb_dump_all(); + return 0; +} +#else +#define early_init_dt_scan_drconf_memory(node) 0 +#endif /* CONFIG_PPC_PSERIES */ + +static int __init early_init_dt_scan_memory(unsigned long node, + const char *uname, int depth, void *data) +{ + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + cell_t *reg, *endp; + unsigned long l; + + /* Look for the ibm,dynamic-reconfiguration-memory node */ + if (depth == 1 && + strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) + return early_init_dt_scan_drconf_memory(node); + + /* We are scanning "memory" nodes only */ + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) + return 0; + + reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(cell_t)); + + pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", + uname, l, reg[0], reg[1], reg[2], reg[3]); + + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + if (size == 0) + continue; + pr_debug(" - %llx , %llx\n", (unsigned long long)base, + (unsigned long long)size); + +#ifdef CONFIG_PPC64 + if (iommu_is_off) { + if (base >= 0x80000000ul) + continue; + if ((base + size) > 0x80000000ul) + size = 0x80000000ul - base; + } +#endif + lmb_add(base, size); + } + return 0; +} + +#ifdef CONFIG_PPC_PSERIES +static void __init early_reserve_mem(void) +{ + u64 base, size; + u64 *reserve_map; + unsigned long self_base; + unsigned long self_size; + + reserve_map = (u64 *)(((unsigned long)initial_boot_params) + + initial_boot_params->off_mem_rsvmap); + + /* before we do anything, lets reserve the dt blob */ + self_base = __pa((unsigned long)initial_boot_params); + self_size = initial_boot_params->totalsize; + lmb_reserve(self_base, self_size); + +#ifdef CONFIG_BLK_DEV_INITRD + /* then reserve the initrd, if any */ + if (initrd_start && (initrd_end > initrd_start)) + lmb_reserve(__pa(initrd_start), initrd_end - initrd_start); +#endif /* CONFIG_BLK_DEV_INITRD */ + +#ifdef CONFIG_PPC32 + /* + * Handle the case where we might be booting from an old kexec + * image that setup the mem_rsvmap as pairs of 32-bit values + */ + if (*reserve_map > 0xffffffffull) { + u32 base_32, size_32; + u32 *reserve_map_32 = (u32 *)reserve_map; + + while (1) { + base_32 = *(reserve_map_32++); + size_32 = *(reserve_map_32++); + if (size_32 == 0) + break; + /* skip if the reservation is for the blob */ + if (base_32 == self_base && size_32 == self_size) + continue; + pr_debug("reserving: %x -> %x\n", base_32, size_32); + lmb_reserve(base_32, size_32); + } + return; + } +#endif + while (1) { + base = *(reserve_map++); + size = *(reserve_map++); + if (size == 0) + break; + pr_debug("reserving: %llx -> %llx\n", base, size); + lmb_reserve(base, size); + } + +#if 0 + pr_debug("memory reserved, lmbs :\n"); + lmb_dump_all(); +#endif +} +#endif + +#ifdef CONFIG_PHYP_DUMP +/** + * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg + * + * Function to find the largest size we need to reserve + * during early boot process. + * + * It either looks for boot param and returns that OR + * returns larger of 256 or 5% rounded down to multiples of 256MB. + * + */ +static inline unsigned long phyp_dump_calculate_reserve_size(void) +{ + unsigned long tmp; + + if (phyp_dump_info->reserve_bootvar) + return phyp_dump_info->reserve_bootvar; + + /* divide by 20 to get 5% of value */ + tmp = lmb_end_of_DRAM(); + do_div(tmp, 20); + + /* round it down in multiples of 256 */ + tmp = tmp & ~0x0FFFFFFFUL; + + return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); +} + +/** + * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory + * + * This routine may reserve memory regions in the kernel only + * if the system is supported and a dump was taken in last + * boot instance or if the hardware is supported and the + * scratch area needs to be setup. In other instances it returns + * without reserving anything. The memory in case of dump being + * active is freed when the dump is collected (by userland tools). + */ +static void __init phyp_dump_reserve_mem(void) +{ + unsigned long base, size; + unsigned long variable_reserve_size; + + if (!phyp_dump_info->phyp_dump_configured) { + printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); + return; + } + + if (!phyp_dump_info->phyp_dump_at_boot) { + printk(KERN_INFO "Phyp-dump disabled at boot time\n"); + return; + } + + variable_reserve_size = phyp_dump_calculate_reserve_size(); + + if (phyp_dump_info->phyp_dump_is_active) { + /* Reserve *everything* above RMR.Area freed by userland tools*/ + base = variable_reserve_size; + size = lmb_end_of_DRAM() - base; + + /* XXX crashed_ram_end is wrong, since it may be beyond + * the memory_limit, it will need to be adjusted. */ + lmb_reserve(base, size); + + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } else { + size = phyp_dump_info->cpu_state_size + + phyp_dump_info->hpte_region_size + + variable_reserve_size; + base = lmb_end_of_DRAM() - size; + lmb_reserve(base, size); + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } +} +#else +static inline void __init phyp_dump_reserve_mem(void) {} +#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ + +void __init early_init_devtree(void *params) +{ + pr_debug(" -> early_init_devtree(%p)\n", params); + + /* Setup flat device-tree pointer */ + initial_boot_params = params; + +#ifdef CONFIG_PPC_RTAS + /* Some machines might need RTAS info for debugging, grab it now. */ + of_scan_flat_dt(early_init_dt_scan_rtas, NULL); +#endif + +#ifdef CONFIG_PHYP_DUMP + /* scan tree to see if dump occured during last boot */ + of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); +#endif + + /* Retrieve various informations from the /chosen node of the + * device-tree, including the platform type, initrd location and + * size, TCE reserve, and more ... + */ + of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + + /* Scan memory nodes and rebuild LMBs */ + lmb_init(); + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Save command line for /proc/cmdline and then parse parameters */ + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); + parse_early_param(); + +#ifdef CONFIG_PPC_PSERIES + /* Reserve LMB regions used by kernel, initrd, dt, etc... */ + lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); + reserve_kdump_trampoline(); + reserve_crashkernel(); + early_reserve_mem(); + phyp_dump_reserve_mem(); + + lmb_enforce_memory_limit(memory_limit); +#endif + + lmb_analyze(); + + pr_debug("Phys. mem: %lx\n", lmb_phys_mem_size()); + +#ifdef CONFIG_PPC_PSERIES + /* We may need to relocate the flat tree, do it now. + * FIXME .. and the initrd too? */ + move_device_tree(); +#endif + pr_debug("Scanning CPUs ...\n"); + + /* Retreive CPU related informations from the flat tree + * (altivec support, boot CPU ID, ...) + */ + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); + + pr_debug(" <- early_init_devtree()\n"); +} + +/** + * Indicates whether the root node has a given value in its + * compatible property. + */ +int machine_is_compatible(const char *compat) +{ + struct device_node *root; + int rc = 0; + + root = of_find_node_by_path("/"); + if (root) { + rc = of_device_is_compatible(root, compat); + of_node_put(root); + } + return rc; +} +EXPORT_SYMBOL(machine_is_compatible); + +/******* + * + * New implementation of the OF "find" APIs, return a refcounted + * object, call of_node_put() when done. The device tree and list + * are protected by a rw_lock. + * + * Note that property management will need some locking as well, + * this isn't dealt with yet. + * + *******/ + +/** + * of_find_node_by_phandle - Find a node given a phandle + * @handle: phandle of the node to find + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_phandle(phandle handle) +{ + struct device_node *np; + + read_lock(&devtree_lock); + for (np = allnodes; np != 0; np = np->allnext) + if (np->linux_phandle == handle) + break; + of_node_get(np); + read_unlock(&devtree_lock); + return np; +} +EXPORT_SYMBOL(of_find_node_by_phandle); + +/** + * of_find_all_nodes - Get next node in global list + * @prev: Previous node or NULL to start iteration + * of_node_put() will be called on it + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_all_nodes(struct device_node *prev) +{ + struct device_node *np; + + read_lock(&devtree_lock); + np = prev ? prev->allnext : allnodes; + for (; np != 0; np = np->allnext) + if (of_node_get(np)) + break; + of_node_put(prev); + read_unlock(&devtree_lock); + return np; +} +EXPORT_SYMBOL(of_find_all_nodes); + +/** + * of_node_get - Increment refcount of a node + * @node: Node to inc refcount, NULL is supported to + * simplify writing of callers + * + * Returns node. + */ +struct device_node *of_node_get(struct device_node *node) +{ + if (node) + kref_get(&node->kref); + return node; +} +EXPORT_SYMBOL(of_node_get); + +static inline struct device_node *kref_to_device_node(struct kref *kref) +{ + return container_of(kref, struct device_node, kref); +} + +/** + * of_node_release - release a dynamically allocated node + * @kref: kref element of the node to be released + * + * In of_node_put() this function is passed to kref_put() + * as the destructor. + */ +static void of_node_release(struct kref *kref) +{ + struct device_node *node = kref_to_device_node(kref); + struct property *prop = node->properties; + + /* We should never be releasing nodes that haven't been detached. */ + if (!of_node_check_flag(node, OF_DETACHED)) { + printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n", + node->full_name); + dump_stack(); + kref_init(&node->kref); + return; + } + + if (!of_node_check_flag(node, OF_DYNAMIC)) + return; + + while (prop) { + struct property *next = prop->next; + kfree(prop->name); + kfree(prop->value); + kfree(prop); + prop = next; + + if (!prop) { + prop = node->deadprops; + node->deadprops = NULL; + } + } + kfree(node->full_name); + kfree(node->data); + kfree(node); +} + +/** + * of_node_put - Decrement refcount of a node + * @node: Node to dec refcount, NULL is supported to + * simplify writing of callers + * + */ +void of_node_put(struct device_node *node) +{ + if (node) + kref_put(&node->kref, of_node_release); +} +EXPORT_SYMBOL(of_node_put); + +/* + * Plug a device node into the tree and global list. + */ +void of_attach_node(struct device_node *np) +{ + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + np->sibling = np->parent->child; + np->allnext = allnodes; + np->parent->child = np; + allnodes = np; + write_unlock_irqrestore(&devtree_lock, flags); +} + +/* + * "Unplug" a node from the device tree. The caller must hold + * a reference to the node. The memory associated with the node + * is not freed until its refcount goes to zero. + */ +void of_detach_node(struct device_node *np) +{ + struct device_node *parent; + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); + + parent = np->parent; + if (!parent) + goto out_unlock; + + if (allnodes == np) + allnodes = np->allnext; + else { + struct device_node *prev; + for (prev = allnodes; + prev->allnext != np; + prev = prev->allnext) + ; + prev->allnext = np->allnext; + } + + if (parent->child == np) + parent->child = np->sibling; + else { + struct device_node *prevsib; + for (prevsib = np->parent->child; + prevsib->sibling != np; + prevsib = prevsib->sibling) + ; + prevsib->sibling = np->sibling; + } + + of_node_set_flag(np, OF_DETACHED); + +out_unlock: + write_unlock_irqrestore(&devtree_lock, flags); +} + +#ifdef CONFIG_PPC_PSERIES +/* + * Fix up the uninitialized fields in a new device node: + * name, type and pci-specific fields + */ + +static int of_finish_dynamic_node(struct device_node *node) +{ + struct device_node *parent = of_get_parent(node); + int err = 0; + const phandle *ibm_phandle; + + node->name = of_get_property(node, "name", NULL); + node->type = of_get_property(node, "device_type", NULL); + + if (!node->name) + node->name = "<NULL>"; + if (!node->type) + node->type = "<NULL>"; + + if (!parent) { + err = -ENODEV; + goto out; + } + + /* We don't support that function on PowerMac, at least + * not yet + */ + if (machine_is(powermac)) + return -ENODEV; + + /* fix up new node's linux_phandle field */ + if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL))) + node->linux_phandle = *ibm_phandle; + +out: + of_node_put(parent); + return err; +} + +static int prom_reconfig_notifier(struct notifier_block *nb, + unsigned long action, void *node) +{ + int err; + + switch (action) { + case PSERIES_RECONFIG_ADD: + err = of_finish_dynamic_node(node); + if (err < 0) { + printk(KERN_ERR "finish_node returned %d\n", err); + err = NOTIFY_BAD; + } + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block prom_reconfig_nb = { + .notifier_call = prom_reconfig_notifier, + .priority = 10, /* This one needs to run first */ +}; + +static int __init prom_reconfig_setup(void) +{ + return pSeries_reconfig_notifier_register(&prom_reconfig_nb); +} +__initcall(prom_reconfig_setup); +#endif + +/* + * Add a property to a node + */ +int prom_add_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + + prop->next = NULL; + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock_irqrestore(&devtree_lock, flags); + return -1; + } + next = &(*next)->next; + } + *next = prop; + write_unlock_irqrestore(&devtree_lock, flags); + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* + * Remove a property from a node. Note that we don't actually + * remove it, since we have given out who-knows-how-many pointers + * to the data using get-property. Instead we just move the property + * to the "dead properties" list, so it won't be found any more. + */ +int prom_remove_property(struct device_node *np, struct property *prop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == prop) { + /* found the node */ + *next = prop->next; + prop->next = np->deadprops; + np->deadprops = prop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to remove the proc node as well */ + if (np->pde) + proc_device_tree_remove_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* + * Update a property in a node. Note that we don't actually + * remove it, since we have given out who-knows-how-many pointers + * to the data using get-property. Instead we just move the property + * to the "dead properties" list, and add the new property to the + * property list + */ +int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop) +{ + struct property **next; + unsigned long flags; + int found = 0; + + write_lock_irqsave(&devtree_lock, flags); + next = &np->properties; + while (*next) { + if (*next == oldprop) { + /* found the node */ + newprop->next = oldprop->next; + *next = newprop; + oldprop->next = np->deadprops; + np->deadprops = oldprop; + found = 1; + break; + } + next = &(*next)->next; + } + write_unlock_irqrestore(&devtree_lock, flags); + + if (!found) + return -ENODEV; + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_update_prop(np->pde, newprop, oldprop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; +} + +/* Find the device node for a given logical cpu number, also returns the cpu + * local thread number (index in ibm,interrupt-server#s) if relevant and + * asked for (non NULL) + */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) +{ + int hardid; + struct device_node *np; + + hardid = boot_cpuid; /* get_hard_smp_processor_id(cpu);*/ + + for_each_node_by_type(np, "cpu") { + const u32 *intserv; + unsigned int plen, t; + + /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist + * fallback to "reg" property and assume no threads + */ + intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", + &plen); + if (intserv == NULL) { + const u32 *reg = of_get_property(np, "reg", NULL); + if (reg == NULL) + continue; + if (*reg == hardid) { + if (thread) + *thread = 0; + return np; + } + } else { + plen /= sizeof(u32); + for (t = 0; t < plen; t++) { + if (hardid == intserv[t]) { + if (thread) + *thread = t; + return np; + } + } + } + } + return NULL; +} +EXPORT_SYMBOL(of_get_cpu_node); + +#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) +static struct debugfs_blob_wrapper flat_dt_blob; + +static int __init export_flat_device_tree(void) +{ + struct dentry *d; + + flat_dt_blob.data = initial_boot_params; + flat_dt_blob.size = initial_boot_params->totalsize; + + d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, + of_debugfs_root, &flat_dt_blob); + if (!d) + return 1; + + return 0; +} +__initcall(export_flat_device_tree); +#endif diff --git a/include/asm-microblaze/of_device.h b/include/asm-microblaze/of_device.h new file mode 100644 index 0000000..5a324cf --- /dev/null +++ b/include/asm-microblaze/of_device.h @@ -0,0 +1,41 @@ +/* + * include/asm-microblaze/of_device.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef _ASM_MICROBLAZE_OF_DEVICE_H +#define _ASM_MICROBLAZE_OF_DEVICE_H +#ifdef __KERNEL__ + +#include <linux/device.h> +#include <linux/of.h> + +/* + * The of_device is a kind of "base class" that is a superset of + * struct device for use by devices attached to an OF node and + * probed using OF properties. + */ +struct of_device { + struct device_node *node; /* to be obsoleted */ + u64 dma_mask; /* DMA mask */ + struct device dev; /* Generic device interface */ +}; + +extern struct of_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent); + +extern ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len); +extern int of_device_uevent(struct device *dev, + struct kobj_uevent_env *env); + +/* This is just here during the transition */ +#include <linux/of_device.h> + +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */ diff --git a/include/asm-microblaze/of_platform.h b/include/asm-microblaze/of_platform.h new file mode 100644 index 0000000..9c6f8cc --- /dev/null +++ b/include/asm-microblaze/of_platform.h @@ -0,0 +1,45 @@ +/* + * include/asm-microblaze/of_platform.h + * + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@xxxxxxxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H +#define _ASM_MICROBLAZE_OF_PLATFORM_H + +/* This is just here during the transition */ +#include <linux/of_platform.h> + +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_phandle(phandle ph); + +extern void of_instantiate_rtc(void); + +#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */ diff --git a/include/asm-microblaze/prom.h b/include/asm-microblaze/prom.h new file mode 100644 index 0000000..2f439b4 --- /dev/null +++ b/include/asm-microblaze/prom.h @@ -0,0 +1,311 @@ +/* + * include/asm-microblaze/prom.h + * + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MICROBLAZE_PROM_H +#define _ASM_MICROBLAZE_PROM_H +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/proc_fs.h> +#include <linux/platform_device.h> +#include <asm/irq.h> +#include <asm/atomic.h> + +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 + +#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) +#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) + +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header { + u32 magic; /* magic word OF_DT_HEADER */ + u32 totalsize; /* total size of DT block */ + u32 off_dt_struct; /* offset to structure */ + u32 off_dt_strings; /* offset to strings */ + u32 off_mem_rsvmap; /* offset to memory reserve map */ + u32 version; /* format version */ + u32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + u32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + u32 dt_struct_size; /* size of the DT structure block */ +}; + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; +}; + +struct device_node { + const char *name; + const char *type; + phandle node; + phandle linux_phandle; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; +}; + +extern struct device_node *of_chosen; + +static inline int of_node_check_flag(struct device_node *n, unsigned long flag) +{ + return test_bit(flag, &n->_flags); +} + +static inline void of_node_set_flag(struct device_node *n, unsigned long flag) +{ + set_bit(flag, &n->_flags); +} + +#define HAVE_ARCH_DEVTREE_FIXUPS + +static inline void set_node_proc_entry(struct device_node *dn, + struct proc_dir_entry *de) +{ + dn->pde = de; +} + +extern struct device_node *of_find_all_nodes(struct device_node *prev); +extern struct device_node *of_node_get(struct device_node *node); +extern void of_node_put(struct device_node *node); + +/* For scanning the flat device-tree at boot time */ +extern int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data); +extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size); +extern int __init + of_flat_dt_is_compatible(unsigned long node, const char *name); +extern unsigned long __init of_get_flat_dt_root(void); + +/* For updating the device tree at runtime */ +extern void of_attach_node(struct device_node *); +extern void of_detach_node(struct device_node *); + +/* Other Prototypes */ +extern void finish_device_tree(void); +extern void unflatten_device_tree(void); +extern void early_init_devtree(void *); +extern int machine_is_compatible(const char *compat); +extern void print_properties(struct device_node *node); +extern int prom_n_intr_cells(struct device_node *np); +extern void prom_get_irq_senses(unsigned char *senses, int off, int max); +extern int prom_add_property(struct device_node *np, struct property *prop); +extern int prom_remove_property(struct device_node *np, struct property *prop); +extern int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop); + +extern struct resource *request_OF_resource(struct device_node *node, + int index, const char *name_postfix); +extern int release_OF_resource(struct device_node *node, int index); + +/* + * OF address retreival & translation + */ + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const u32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | *(cell++); + return r; +} + +/* Like of_read_number, but we want an unsigned long result */ +#define of_read_ulong(cell, size) of_read_number(cell, size) + +/* Translate an OF address block into a CPU physical address + */ +extern u64 of_translate_address(struct device_node *np, const u32 *addr); + +/* Extract an address from a device, returns the region size and + * the address space flags too. The PCI version uses a BAR number + * instead of an absolute index + */ +extern const u32 *of_get_address(struct device_node *dev, int index, + u64 *size, unsigned int *flags); +extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, + u64 *size, unsigned int *flags); + +/* Get an address as a resource. Note that if your address is + * a PIO address, the conversion will fail if the physical address + * can't be internally converted to an IO token with + * pci_address_to_pio(), that is because it's either called to early + * or it can't be matched to any host bridge IO space + */ +extern int of_address_to_resource(struct device_node *dev, int index, + struct resource *r); +extern int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r); + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size); + +extern void kdump_move_device_tree(void); + +/* CPU OF node matching */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); + +/* Get the MAC address */ +extern const void *of_get_mac_address(struct device_node *np); + +/* + * OF interrupt mapping + */ + +/* This structure is returned when an interrupt is mapped. The controller + * field needs to be put() after use + */ + +#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ + +struct of_irq { + struct device_node *controller; /* Interrupt controller node */ + u32 size; /* Specifier size */ + u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ +}; + +/** + * of_irq_map_init - Initialize the irq remapper + * @flags: flags defining workarounds to enable + * + * Some machines have bugs in the device-tree which require certain workarounds + * to be applied. Call this before any interrupt mapping attempts to enable + * those workarounds. + */ +#define OF_IMAP_OLDWORLD_MAC 0x00000001 +#define OF_IMAP_NO_PHANDLE 0x00000002 + +extern void of_irq_map_init(unsigned int flags); + +/** + * of_irq_map_raw - Low level interrupt tree parsing + * @parent: the device interrupt parent + * @intspec: interrupt specifier ("interrupts" property of the device) + * @ointsize: size of the passed in interrupt specifier + * @addr: address specifier (start of "reg" property of the device) + * @out_irq: structure of_irq filled by this function + * + * Returns 0 on success and a negative number on error + * + * This function is a low-level interrupt tree walking function. It + * can be used to do a partial walk with synthetized reg and interrupts + * properties, for example when resolving PCI interrupts when no device + * node exist for the parent. + * + */ + +extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, + u32 ointsize, const u32 *addr, + struct of_irq *out_irq); + +/** + * of_irq_map_one - Resolve an interrupt for a device + * @device: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @out_irq: structure of_irq filled by this function + * + * This function resolves an interrupt, walking the tree, for a given + * device-tree node. It's the high level pendant to of_irq_map_raw(). + * It also implements the workarounds for OldWolrd Macs. + */ +extern int of_irq_map_one(struct device_node *device, int index, + struct of_irq *out_irq); + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +struct pci_dev; +extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); + +extern int of_irq_to_resource(struct device_node *dev, int index, + struct resource *r); + +/** + * of_iomap - Maps the memory mapped IO for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * + * Returns a pointer to the mapped memory + */ +extern void __iomem *of_iomap(struct device_node *device, int index); + +/* + * NB: This is here while we transition from using asm/prom.h + * to linux/of.h + */ +#include <linux/of.h> + +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_PROM_H */ -- 1.5.4.GIT -- To unsubscribe from this list: send the line "unsubscribe linux-arch" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html