Re: [PATCH 1/3] mm/mempolicy: implement the sysfs-based weighted_interleave interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gregory Price <gourry.memverge@xxxxxxxxx> writes:

> From: Rakie Kim <rakie.kim@xxxxxx>
>
> This patch provides a way to set interleave weight information under
> sysfs at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN
>
> The sysfs structure is designed as follows.
>
>   $ tree /sys/kernel/mm/mempolicy/
>   /sys/kernel/mm/mempolicy/ [1]
>   └── weighted_interleave [2]
>       ├── node0 [3]
>       └── node1
>
> Each file above can be explained as follows.
>
> [1] mm/mempolicy: configuration interface for mempolicy subsystem
>
> [2] weighted_interleave/: config interface for weighted interleave policy
>
> [3] weighted_interleave/nodeN: weight for nodeN
>
> Internally, there is a secondary table `default_iw_table`, which holds
> kernel-internal default interleave weights for each possible node.
>
> If the value for a node is set to `0`, the default value will be used.
>
> If sysfs is disabled in the config, interleave weights will default
> to use `default_iw_table`.
>
> Suggested-by: Huang Ying <ying.huang@xxxxxxxxx>
> Signed-off-by: Rakie Kim <rakie.kim@xxxxxx>
> Signed-off-by: Honggyu Kim <honggyu.kim@xxxxxx>
> Co-developed-by: Gregory Price <gregory.price@xxxxxxxxxxxx>
> Signed-off-by: Gregory Price <gregory.price@xxxxxxxxxxxx>
> Co-developed-by: Hyeongtak Ji <hyeongtak.ji@xxxxxx>
> Signed-off-by: Hyeongtak Ji <hyeongtak.ji@xxxxxx>
> ---
>  .../ABI/testing/sysfs-kernel-mm-mempolicy     |   4 +
>  ...fs-kernel-mm-mempolicy-weighted-interleave |  26 ++
>  mm/mempolicy.c                                | 251 ++++++++++++++++++
>  3 files changed, 281 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-mempolicy
>  create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
>
> diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy
> new file mode 100644
> index 000000000000..2dcf24f4384a
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy
> @@ -0,0 +1,4 @@
> +What:		/sys/kernel/mm/mempolicy/
> +Date:		December 2023
> +Contact:	Linux memory management mailing list <linux-mm@xxxxxxxxx>
> +Description:	Interface for Mempolicy
> diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
> new file mode 100644
> index 000000000000..e6a38139bf0f
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
> @@ -0,0 +1,26 @@
> +What:		/sys/kernel/mm/mempolicy/weighted_interleave/
> +Date:		December 2023
> +Contact:	Linux memory management mailing list <linux-mm@xxxxxxxxx>
> +Description:	Configuration Interface for the Weighted Interleave policy
> +
> +What:		/sys/kernel/mm/mempolicy/weighted_interleave/nodeN
> +Date:		December 2023
> +Contact:	Linux memory management mailing list <linux-mm@xxxxxxxxx>
> +Description:	Weight configuration interface for nodeN
> +
> +		The interleave weight for a memory node (N). These weights are
> +		utilized by processes which have set their mempolicy to
> +		MPOL_WEIGHTED_INTERLEAVE and have opted into global weights by
> +		omitting a task-local weight array.
> +
> +		These weights only affect new allocations, and changes at runtime
> +		will not cause migrations on already allocated pages.
> +
> +		The minimum weight for a node is always 1.
> +
> +		Minimum weight: 1
> +		Maximum weight: 255
> +
> +		Writing an empty string or `0` will reset the weight to the
> +		system default. The system default may be set by the kernel
> +		or drivers at boot or during hotplug events.
> diff --git a/mm/mempolicy.c b/mm/mempolicy.c
> index 10a590ee1c89..5da4fd79fd18 100644
> --- a/mm/mempolicy.c
> +++ b/mm/mempolicy.c
> @@ -131,6 +131,30 @@ static struct mempolicy default_policy = {
>  
>  static struct mempolicy preferred_node_policy[MAX_NUMNODES];
>  
> +struct iw_table {
> +	struct rcu_head rcu;
> +	u8 weights[MAX_NUMNODES];
> +};
> +/*
> + * default_iw_table is the kernel-internal default value interleave
> + * weight table. It is to be set by driver code capable of reading
> + * HMAT/CDAT information, and to provide mempolicy a sane set of
> + * default weight values for WEIGHTED_INTERLEAVE mode.
> + *
> + * By default, prior to HMAT/CDAT information being consumed, the
> + * default weight of all nodes is 1.  The default weight of any
> + * node can only be in the range 1-255. A 0-weight is not allowed.
> + */
> +static struct iw_table default_iw_table;
> +/*
> + * iw_table is the sysfs-set interleave weight table, a value of 0
> + * denotes that the default_iw_table value should be used.
> + *
> + * iw_table is RCU protected
> + */
> +static struct iw_table __rcu *iw_table;
> +static DEFINE_MUTEX(iw_table_mtx);

I greped "mtx" in kernel/*.c and mm/*.c and found nothing.  To following
the existing coding convention, better to name this as iw_table_mutex or
iw_table_lock?

And, I think this is used to protect both iw_table and default_iw_table?
If so, it deserves some comments.

> +
>  /**
>   * numa_nearest_node - Find nearest node by state
>   * @node: Node id to start the search
> @@ -3067,3 +3091,230 @@ void mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol)
>  		p += scnprintf(p, buffer + maxlen - p, ":%*pbl",
>  			       nodemask_pr_args(&nodes));
>  }
> +
> +#ifdef CONFIG_SYSFS
> +struct iw_node_attr {
> +	struct kobj_attribute kobj_attr;
> +	int nid;
> +};
> +
> +static ssize_t node_show(struct kobject *kobj, struct kobj_attribute *attr,
> +			 char *buf)
> +{
> +	struct iw_node_attr *node_attr;
> +	u8 weight;
> +	struct iw_table __rcu *table;
> +
> +	node_attr = container_of(attr, struct iw_node_attr, kobj_attr);
> +
> +	rcu_read_lock();
> +	table = rcu_dereference(iw_table);
> +	weight = table->weights[node_attr->nid];
> +	rcu_read_unlock();
> +
> +	return sysfs_emit(buf, "%d\n", weight);
> +}
> +
> +static ssize_t node_store(struct kobject *kobj, struct kobj_attribute *attr,
> +			  const char *buf, size_t count)
> +{
> +	struct iw_node_attr *node_attr;
> +	struct iw_table __rcu *new;
> +	struct iw_table __rcu *old;
> +	u8 weight = 0;
> +
> +	node_attr = container_of(attr, struct iw_node_attr, kobj_attr);
> +	if (count == 0 || sysfs_streq(buf, ""))
> +		weight = 0;
> +	else if (kstrtou8(buf, 0, &weight))
> +		return -EINVAL;
> +
> +	new = kmalloc(sizeof(*new), GFP_KERNEL);
> +	if (!new)
> +		return -ENOMEM;
> +
> +	mutex_lock(&iw_table_mtx);
> +	old = rcu_dereference_protected(iw_table,
> +					lockdep_is_held(&iw_table_mtx));
> +	/* If value is 0, revert to default weight */
> +	weight = weight ? weight : default_iw_table.weights[node_attr->nid];

If we change the default weight in default_iw_table.weights[], how do we
identify whether the weight has been customized by users via sysfs?  So,
I suggest to use 0 in iw_table for not-customized weight.

And if so, we need to use RCU to access default_iw_table too.

> +	memcpy(&new->weights, &old->weights, sizeof(new->weights));
> +	new->weights[node_attr->nid] = weight;
> +	rcu_assign_pointer(iw_table, new);
> +	mutex_unlock(&iw_table_mtx);
> +	kfree_rcu(old, rcu);

synchronize_rcu() should be OK here.  It's fast enough in this cold
path.  This make it good to define iw_table as

u8 __rcu *iw_table;

Then, we only need to allocate nr_node_ids elements now.

> +	return count;
> +}
> +
> +static struct iw_node_attr *node_attrs[MAX_NUMNODES];
> +
> +static void sysfs_wi_node_release(struct iw_node_attr *node_attr,
> +				  struct kobject *parent)
> +{
> +	if (!node_attr)
> +		return;
> +	sysfs_remove_file(parent, &node_attr->kobj_attr.attr);
> +	kfree(node_attr->kobj_attr.attr.name);
> +	kfree(node_attr);
> +}
> +
> +static void sysfs_wi_release(struct kobject *wi_kobj)
> +{
> +	int i;
> +
> +	for (i = 0; i < MAX_NUMNODES; i++)
> +		sysfs_wi_node_release(node_attrs[i], wi_kobj);
> +	kobject_put(wi_kobj);
> +}
> +
> +static const struct kobj_type wi_ktype = {
> +	.sysfs_ops = &kobj_sysfs_ops,
> +	.release = sysfs_wi_release,
> +};
> +
> +static int add_weight_node(int nid, struct kobject *wi_kobj)
> +{
> +	struct iw_node_attr *node_attr;
> +	char *name;
> +
> +	node_attr = kzalloc(sizeof(*node_attr), GFP_KERNEL);
> +	if (!node_attr)
> +		return -ENOMEM;
> +
> +	name = kasprintf(GFP_KERNEL, "node%d", nid);
> +	if (!name) {
> +		kfree(node_attr);
> +		return -ENOMEM;
> +	}
> +
> +	sysfs_attr_init(&node_attr->kobj_attr.attr);
> +	node_attr->kobj_attr.attr.name = name;
> +	node_attr->kobj_attr.attr.mode = 0644;
> +	node_attr->kobj_attr.show = node_show;
> +	node_attr->kobj_attr.store = node_store;
> +	node_attr->nid = nid;
> +
> +	if (sysfs_create_file(wi_kobj, &node_attr->kobj_attr.attr)) {
> +		kfree(node_attr->kobj_attr.attr.name);
> +		kfree(node_attr);
> +		pr_err("failed to add attribute to weighted_interleave\n");
> +		return -ENOMEM;
> +	}
> +
> +	node_attrs[nid] = node_attr;
> +	return 0;
> +}
> +
> +static int add_weighted_interleave_group(struct kobject *root_kobj)
> +{
> +	struct kobject *wi_kobj;
> +	int nid, err;
> +
> +	wi_kobj = kzalloc(sizeof(struct kobject), GFP_KERNEL);
> +	if (!wi_kobj)
> +		return -ENOMEM;
> +
> +	err = kobject_init_and_add(wi_kobj, &wi_ktype, root_kobj,
> +				   "weighted_interleave");
> +	if (err) {
> +		kfree(wi_kobj);
> +		return err;
> +	}
> +
> +	memset(node_attrs, 0, sizeof(node_attrs));
> +	for_each_node_state(nid, N_POSSIBLE) {
> +		err = add_weight_node(nid, wi_kobj);
> +		if (err) {
> +			pr_err("failed to add sysfs [node%d]\n", nid);
> +			break;
> +		}
> +	}
> +	if (err)
> +		kobject_put(wi_kobj);
> +	return 0;
> +}
> +
> +static void mempolicy_kobj_release(struct kobject *kobj)
> +{
> +	if (iw_table != &default_iw_table)
> +		kfree(iw_table);
> +	kfree(kobj);
> +}
> +
> +static const struct kobj_type mempolicy_ktype = {
> +	.release = mempolicy_kobj_release
> +};
> +
> +static struct kobject *mempolicy_kobj;
> +static int __init mempolicy_sysfs_init(void)
> +{
> +	int err;
> +	struct kobject *mempolicy_kobj;
> +	struct iw_table __rcu *table = NULL;
> +
> +	/*
> +	 * If sysfs setup fails, utilize the default weight table
> +	 * This at least allows mempolicy to continue functioning safely.
> +	 */
> +	memset(&default_iw_table.weights, 1, MAX_NUMNODES);
> +	iw_table = &default_iw_table;
> +
> +	table = kzalloc(sizeof(struct iw_table), GFP_KERNEL);
> +	if (!table)
> +		return -ENOMEM;
> +
> +	memcpy(&table->weights, default_iw_table.weights,
> +	       sizeof(table->weights));
> +
> +	mempolicy_kobj = kzalloc(sizeof(*mempolicy_kobj), GFP_KERNEL);
> +	if (!mempolicy_kobj) {
> +		kfree(table);
> +		pr_err("failed to add mempolicy kobject to the system\n");
> +		return -ENOMEM;
> +	}
> +	err = kobject_init_and_add(mempolicy_kobj, &mempolicy_ktype, mm_kobj,
> +				   "mempolicy");
> +	if (err) {
> +		kfree(table);
> +		kfree(mempolicy_kobj);
> +		return err;
> +	}
> +
> +	err = add_weighted_interleave_group(mempolicy_kobj);
> +
> +	if (err) {
> +		kobject_put(mempolicy_kobj);
> +		return err;
> +	}
> +
> +	iw_table = table;
> +	return err;
> +}
> +
> +static void __exit mempolicy_exit(void)
> +{
> +	if (mempolicy_kobj)
> +		kobject_put(mempolicy_kobj);
> +}
> +
> +#else
> +static int __init mempolicy_sysfs_init(void)
> +{
> +	/*
> +	 * if sysfs is not enabled MPOL_WEIGHTED_INTERLEAVE defaults to
> +	 * MPOL_INTERLEAVE behavior, but is still defined separately to
> +	 * allow task-local weighted interleave and system-defaults to
> +	 * operate as intended.
> +	 *
> +	 * In this scenario iw_table cannot (presently) change, so
> +	 * there's no need to set up RCU / cleanup code.
> +	 */
> +	memset(&default_iw_table.weights, 1, sizeof(default_iw_table));

This depends on sizeof(default_iw_table.weights[0]) == 1, I think it's
better to use explicit loop here to make the code more robust a little.

> +	iw_table = default_iw_table;

iw_table = &default_iw_table;

?

> +	return 0;
> +}
> +
> +static void __exit mempolicy_exit(void) { }
> +#endif /* CONFIG_SYSFS */
> +late_initcall(mempolicy_sysfs_init);
> +module_exit(mempolicy_exit);

--
Best Regards,
Huang, Ying





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux