PRP support requires a proto parameter which is 0 for hsr and 1 for
prp. Default is hsr and is backward compatible.
Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
---
dependent on the series "[net-next PATCH v3 0/7] Add PRP driver"
man/man8/ip-link.8.in | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
index e8a25451f7cd..37d77328a5fc 100644
--- a/man/man8/ip-link.8.in
+++ b/man/man8/ip-link.8.in
@@ -1360,7 +1360,8 @@ the following additional arguments are supported:
.BI slave1 " SLAVE1-IF " slave2 " SLAVE2-IF "
.RB [ " supervision"
.IR ADDR-BYTE " ] ["
-.BR version " { " 0 " | " 1 " } ]"
+.BR version " { " 0 " | " 1 " } ["
+.BR proto " { " 0 " | " 1 " } ]"
.in +8
.sp
@@ -1381,6 +1382,12 @@ Default option is "0", possible values 0-255.
- Selects the protocol version of the interface. Default option is "0", which
corresponds to the 2010 version of the HSR standard. Option "1" activates the
2012 version.
+
+.BR proto " { " 0 " | " 1 " }"
+- Selects the protocol at the interface. Default option is "0", which
+corresponds to the HSR standard. Option "1" activates the Parallel
+Redundancy Protocol (PRP).
+.
.in -8
.TP
--
2.17.1
