[RFC v2 1/2] kernel/sysctl: support setting sysctl parameters from kernel command line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A recently proposed patch to add vm_swappiness command line parameter in
addition to existing sysctl [1] made me wonder why we don't have a general
support for passing sysctl parameters via command line. Googling found only
somebody else wondering the same [2], but I haven't found any prior discussion
with reasons why not to do this.

Settings the vm_swappiness issue aside (the underlying issue might be solved in
a different way), quick search of kernel-parameters.txt shows there are already
some that exist as both sysctl and kernel parameter - hung_task_panic,
nmi_watchdog, numa_zonelist_order, traceoff_on_warning. A general mechanism
would remove the need to add more of those one-offs and might be handy in
situations where configuration by e.g. /etc/sysctl.d/ is impractical.
Also after 61a47c1ad3a4 ("sysctl: Remove the sysctl system call") the only way
to set sysctl is via procfs, so this would eventually allow small systems to be
built without CONFIG_PROC_SYSCTL and still be able to change sysctl parameters.

Hence, this patch adds a new parse_args() pass that looks for parameters
prefixed by 'sysctl.' and searches for them in the sysctl ctl_tables. When
found, the respective proc handler is invoked. The search is just a naive
linear one, to avoid using the whole procfs layer. It should be acceptable,
as the cost depends on number of sysctl. parameters passed.

The main limitation of avoiding the procfs layer is however that sysctls
dynamically registered by register_sysctl_table() or register_sysctl_paths()
cannot currently be set by this method.

The processing is hooked right before the init process is loaded, as some
handlers might be more complicated than simple setters and might need some
subsystems to be initialized. At the moment the init process can be started and
eventually execute a process writing to /proc/sys/ then it should be also fine
to do that from the kernel.

[1] https://lore.kernel.org/linux-doc/BL0PR02MB560167492CA4094C91589930E9FC0@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
[2] https://unix.stackexchange.com/questions/558802/how-to-set-sysctl-using-kernel-command-line-parameter

Signed-off-by: Vlastimil Babka <vbabka@xxxxxxx>
---
v2: - handle any nesting level of parameter name
 - add Documentation/admin-guide/kernel-parameters.txt blurb
 - alias support for legacy one-off parameters, with first conversion (patch 2)
 - still no support for dynamically registed sysctls

 .../admin-guide/kernel-parameters.txt         |  9 +++
 include/linux/sysctl.h                        |  1 +
 init/main.c                                   | 21 +++++++
 kernel/sysctl.c                               | 62 +++++++++++++++++++
 4 files changed, 93 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index c07815d230bc..5076e288f93f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4793,6 +4793,15 @@
 
 	switches=	[HW,M68k]
 
+	sysctl.*=	[KNL]
+			Set a sysctl parameter right before loading the init
+			process, as if the value was written to the respective
+			/proc/sys/... file. Currently a subset of sysctl
+			parameters is supported that is not registered
+			dynamically. Unrecognized parameters and invalid values
+			are reported in the kernel log.
+			Example: sysctl.vm.swappiness=40
+
 	sysfs.deprecated=0|1 [KNL]
 			Enable/disable old style sysfs layout for old udev
 			on older distributions. When this option is enabled
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 02fa84493f23..62ae963a5c0c 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -206,6 +206,7 @@ struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
 void unregister_sysctl_table(struct ctl_table_header * table);
 
 extern int sysctl_init(void);
+int process_sysctl_arg(char *param, char *val, const char *unused, void *arg);
 
 extern struct ctl_table sysctl_mount_point[];
 
diff --git a/init/main.c b/init/main.c
index ee4947af823f..74a094c6b8b9 100644
--- a/init/main.c
+++ b/init/main.c
@@ -1345,6 +1345,25 @@ void __weak free_initmem(void)
 	free_initmem_default(POISON_FREE_INITMEM);
 }
 
+static void do_sysctl_args(void)
+{
+#ifdef CONFIG_SYSCTL
+	size_t len = strlen(saved_command_line) + 1;
+	char *command_line;
+
+	command_line = kzalloc(len, GFP_KERNEL);
+	if (!command_line)
+		panic("%s: Failed to allocate %zu bytes\n", __func__, len);
+
+	strcpy(command_line, saved_command_line);
+
+	parse_args("Setting sysctl args", command_line,
+		   NULL, 0, -1, -1, NULL, process_sysctl_arg);
+
+	kfree(command_line);
+#endif
+}
+
 static int __ref kernel_init(void *unused)
 {
 	int ret;
@@ -1367,6 +1386,8 @@ static int __ref kernel_init(void *unused)
 
 	rcu_end_inkernel_boot();
 
+	do_sysctl_args();
+
 	if (ramdisk_execute_command) {
 		ret = run_init_process(ramdisk_execute_command);
 		if (!ret)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ad5b88a53c5a..18c7f5606d55 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1980,6 +1980,68 @@ int __init sysctl_init(void)
 	return 0;
 }
 
+/* Set sysctl value passed on kernel command line. */
+int process_sysctl_arg(char *param, char *val,
+			       const char *unused, void *arg)
+{
+	size_t count;
+	char *remaining;
+	int err;
+	loff_t ppos = 0;
+	struct ctl_table *ctl, *found = NULL;
+
+	if (strncmp(param, "sysctl.", sizeof("sysctl.") - 1))
+		return 0;
+
+	param += sizeof("sysctl.") - 1;
+
+	remaining = param;
+	ctl = &sysctl_base_table[0];
+
+	while(ctl->procname != 0) {
+		int len = strlen(ctl->procname);
+		if (strncmp(remaining, ctl->procname, len)) {
+			ctl++;
+			continue;
+		}
+		if (ctl->child) {
+			if (remaining[len] == '.') {
+				remaining += len + 1;
+				ctl = ctl->child;
+				continue;
+			}
+		} else {
+			if (remaining[len] == '\0') {
+				found = ctl;
+				break;
+			}
+		}
+		ctl++;
+	}
+
+	if (!found) {
+		pr_warn("Unknown sysctl param '%s' on command line", param);
+		return 0;
+	}
+
+	if (!(found->mode & 0200)) {
+		pr_warn("Cannot set sysctl '%s=%s' from command line - not writable",
+			param, val);
+		return 0;
+	}
+
+	count = strlen(val);
+	err = found->proc_handler(found, 1, val, &count, &ppos);
+
+	if (err)
+		pr_warn("Error %d setting sysctl '%s=%s' from command line",
+			err, param, val);
+
+	pr_debug("Set sysctl '%s=%s' from command line", param, val);
+
+	return 0;
+}
+
 #endif /* CONFIG_SYSCTL */
 
 /*
-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux