Re: [PATCH v5 3/3] fpga: dfl: fme: add power management support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/30/19 11:37 PM, Wu Hao wrote:
This patch adds support for power management private feature under
FPGA Management Engine (FME). This private feature driver registers
a hwmon for power (power1_input), thresholds information, e.g.
(power1_max / crit / max_alarm / crit_alarm) and also read-only sysfs
interfaces for other power management information. For configuration,
user could write threshold values via above power1_max / crit sysfs
interface under hwmon too.

Signed-off-by: Luwei Kang <luwei.kang@xxxxxxxxx>
Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>

Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>

---
v2: create a dfl_fme_power hwmon to expose power sysfs interfaces.
     move all sysfs interfaces under hwmon
         consumed          --> hwmon power1_input
         threshold1        --> hwmon power1_cap
         threshold2        --> hwmon power1_crit
         threshold1_status --> hwmon power1_cap_status
         threshold2_status --> hwmon power1_crit_status
         xeon_limit        --> hwmon power1_xeon_limit
         fpga_limit        --> hwmon power1_fpga_limit
         ltr               --> hwmon power1_ltr
v3: rename some hwmon sysfs interfaces to follow hwmon ABI.
	power1_cap         --> power1_max
	power1_cap_status  --> power1_max_alarm
	power1_crit_status --> power1_crit_alarm
     update sysfs doc for above sysfs interface changes.
     replace scnprintf with sprintf in sysfs interface.
v4: use HWMON_CHANNEL_INFO.
     update date in sysfs doc.
v5: clamp threshold inputs in power_hwmon_write function.
     update sysfs doc as threshold inputs are clamped now.
     add more descriptions to ltr sysfs interface.
---
  Documentation/ABI/testing/sysfs-platform-dfl-fme |  68 +++++++
  drivers/fpga/dfl-fme-main.c                      | 216 +++++++++++++++++++++++
  2 files changed, 284 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
index 2cd17dc..5c2e49d 100644
--- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -127,6 +127,7 @@ Contact:	Wu Hao <hao.wu@xxxxxxxxx>
  Description:	Read-Only. Read this file to get the name of hwmon device, it
  		supports values:
  		    'dfl_fme_thermal' - thermal hwmon device name
+		    'dfl_fme_power'   - power hwmon device name
What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
  Date:		June 2019
@@ -183,3 +184,70 @@ Description:	Read-Only. Read this file to get the policy of hardware threshold1
  		(see 'temp1_max'). It only supports two values (policies):
  		    0 - AP2 state (90% throttling)
  		    1 - AP1 state (50% throttling)
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-Only. It returns current FPGA power consumption in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_max
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-Write. Read this file to get current hardware power
+		threshold1 in uW. If power consumption rises at or above
+		this threshold, hardware starts 50% throttling.
+		Write this file to set current hardware power threshold1 in uW.
+		As hardware only accepts values in Watts, so input value will
+		be round down per Watts (< 1 watts part will be discarded) and
+		clamped within the range from 0 to 127 Watts. Write fails with
+		-EINVAL if input parsing fails.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-Write. Read this file to get current hardware power
+		threshold2 in uW. If power consumption rises at or above
+		this threshold, hardware starts 90% throttling.
+		Write this file to set current hardware power threshold2 in uW.
+		As hardware only accepts values in Watts, so input value will
+		be round down per Watts (< 1 watts part will be discarded) and
+		clamped within the range from 0 to 127 Watts. Write fails with
+		-EINVAL if input parsing fails.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_max_alarm
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-only. It returns 1 if power consumption is currently at or
+		above hardware threshold1 (see 'power1_max'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_alarm
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-only. It returns 1 if power consumption is currently at or
+		above hardware threshold2 (see 'power1_crit'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-Only. It returns power limit for XEON in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-Only. It returns power limit for FPGA in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Wu Hao <hao.wu@xxxxxxxxx>
+Description:	Read-only. Read this file to get current Latency Tolerance
+		Reporting (ltr) value. It returns 1 if all Accelerated
+		Function Units (AFUs) can tolerate latency >= 40us for memory
+		access or 0 if any AFU is latency sensitive (< 40us).
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index 59ff9f1..1ff386d 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -400,6 +400,218 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
  	.uinit = fme_thermal_mgmt_uinit,
  };
+#define FME_PWR_STATUS 0x8
+#define FME_LATENCY_TOLERANCE	BIT_ULL(18)
+#define PWR_CONSUMED		GENMASK_ULL(17, 0)
+
+#define FME_PWR_THRESHOLD	0x10
+#define PWR_THRESHOLD1		GENMASK_ULL(6, 0)	/* in Watts */
+#define PWR_THRESHOLD2		GENMASK_ULL(14, 8)	/* in Watts */
+#define PWR_THRESHOLD_MAX	0x7f			/* in Watts */
+#define PWR_THRESHOLD1_STATUS	BIT_ULL(16)
+#define PWR_THRESHOLD2_STATUS	BIT_ULL(17)
+
+#define FME_PWR_XEON_LIMIT	0x18
+#define XEON_PWR_LIMIT		GENMASK_ULL(14, 0)	/* in 0.1 Watts */
+#define XEON_PWR_EN		BIT_ULL(15)
+#define FME_PWR_FPGA_LIMIT	0x20
+#define FPGA_PWR_LIMIT		GENMASK_ULL(14, 0)	/* in 0.1 Watts */
+#define FPGA_PWR_EN		BIT_ULL(15)
+
+static int power_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			    u32 attr, int channel, long *val)
+{
+	struct dfl_feature *feature = dev_get_drvdata(dev);
+	u64 v;
+
+	switch (attr) {
+	case hwmon_power_input:
+		v = readq(feature->ioaddr + FME_PWR_STATUS);
+		*val = (long)(FIELD_GET(PWR_CONSUMED, v) * 1000000);
+		break;
+	case hwmon_power_max:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		*val = (long)(FIELD_GET(PWR_THRESHOLD1, v) * 1000000);
+		break;
+	case hwmon_power_crit:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		*val = (long)(FIELD_GET(PWR_THRESHOLD2, v) * 1000000);
+		break;
+	case hwmon_power_max_alarm:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		*val = (long)FIELD_GET(PWR_THRESHOLD1_STATUS, v);
+		break;
+	case hwmon_power_crit_alarm:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		*val = (long)FIELD_GET(PWR_THRESHOLD2_STATUS, v);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int power_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			     u32 attr, int channel, long val)
+{
+	struct dfl_feature_platform_data *pdata = dev_get_platdata(dev->parent);
+	struct dfl_feature *feature = dev_get_drvdata(dev);
+	int ret = 0;
+	u64 v;
+
+	val = clamp_val(val / 1000000, 0, PWR_THRESHOLD_MAX);
+
+	mutex_lock(&pdata->lock);
+
+	switch (attr) {
+	case hwmon_power_max:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		v &= ~PWR_THRESHOLD1;
+		v |= FIELD_PREP(PWR_THRESHOLD1, val);
+		writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
+		break;
+	case hwmon_power_crit:
+		v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+		v &= ~PWR_THRESHOLD2;
+		v |= FIELD_PREP(PWR_THRESHOLD2, val);
+		writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	mutex_unlock(&pdata->lock);
+
+	return ret;
+}
+
+static umode_t power_hwmon_attrs_visible(const void *drvdata,
+					 enum hwmon_sensor_types type,
+					 u32 attr, int channel)
+{
+	switch (attr) {
+	case hwmon_power_input:
+	case hwmon_power_max_alarm:
+	case hwmon_power_crit_alarm:
+		return 0444;
+	case hwmon_power_max:
+	case hwmon_power_crit:
+		return 0644;
+	}
+
+	return 0;
+}
+
+static const struct hwmon_ops power_hwmon_ops = {
+	.is_visible = power_hwmon_attrs_visible,
+	.read = power_hwmon_read,
+	.write = power_hwmon_write,
+};
+
+static const struct hwmon_channel_info *power_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(power, HWMON_P_INPUT |
+				  HWMON_P_MAX   | HWMON_P_MAX_ALARM |
+				  HWMON_P_CRIT  | HWMON_P_CRIT_ALARM),
+	NULL
+};
+
+static const struct hwmon_chip_info power_hwmon_chip_info = {
+	.ops = &power_hwmon_ops,
+	.info = power_hwmon_info,
+};
+
+static ssize_t power1_xeon_limit_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct dfl_feature *feature = dev_get_drvdata(dev);
+	u16 xeon_limit = 0;
+	u64 v;
+
+	v = readq(feature->ioaddr + FME_PWR_XEON_LIMIT);
+
+	if (FIELD_GET(XEON_PWR_EN, v))
+		xeon_limit = FIELD_GET(XEON_PWR_LIMIT, v);
+
+	return sprintf(buf, "%u\n", xeon_limit * 100000);
+}
+
+static ssize_t power1_fpga_limit_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct dfl_feature *feature = dev_get_drvdata(dev);
+	u16 fpga_limit = 0;
+	u64 v;
+
+	v = readq(feature->ioaddr + FME_PWR_FPGA_LIMIT);
+
+	if (FIELD_GET(FPGA_PWR_EN, v))
+		fpga_limit = FIELD_GET(FPGA_PWR_LIMIT, v);
+
+	return sprintf(buf, "%u\n", fpga_limit * 100000);
+}
+
+static ssize_t power1_ltr_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct dfl_feature *feature = dev_get_drvdata(dev);
+	u64 v;
+
+	v = readq(feature->ioaddr + FME_PWR_STATUS);
+
+	return sprintf(buf, "%u\n",
+		       (unsigned int)FIELD_GET(FME_LATENCY_TOLERANCE, v));
+}
+
+static DEVICE_ATTR_RO(power1_xeon_limit);
+static DEVICE_ATTR_RO(power1_fpga_limit);
+static DEVICE_ATTR_RO(power1_ltr);
+
+static struct attribute *power_extra_attrs[] = {
+	&dev_attr_power1_xeon_limit.attr,
+	&dev_attr_power1_fpga_limit.attr,
+	&dev_attr_power1_ltr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(power_extra);
+
+static int fme_power_mgmt_init(struct platform_device *pdev,
+			       struct dfl_feature *feature)
+{
+	struct device *hwmon;
+
+	dev_dbg(&pdev->dev, "FME Power Management Init.\n");
+
+	hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
+						     "dfl_fme_power", feature,
+						     &power_hwmon_chip_info,
+						     power_extra_groups);
+	if (IS_ERR(hwmon)) {
+		dev_err(&pdev->dev, "Fail to register power hwmon\n");
+		return PTR_ERR(hwmon);
+	}
+
+	return 0;
+}
+
+static void fme_power_mgmt_uinit(struct platform_device *pdev,
+				 struct dfl_feature *feature)
+{
+	dev_dbg(&pdev->dev, "FME Power Management UInit.\n");
+}
+
+static const struct dfl_feature_id fme_power_mgmt_id_table[] = {
+	{.id = FME_FEATURE_ID_POWER_MGMT,},
+	{0,}
+};
+
+static const struct dfl_feature_ops fme_power_mgmt_ops = {
+	.init = fme_power_mgmt_init,
+	.uinit = fme_power_mgmt_uinit,
+};
+
  static struct dfl_feature_driver fme_feature_drvs[] = {
  	{
  		.id_table = fme_hdr_id_table,
@@ -418,6 +630,10 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
  		.ops = &fme_thermal_mgmt_ops,
  	},
  	{
+		.id_table = fme_power_mgmt_id_table,
+		.ops = &fme_power_mgmt_ops,
+	},
+	{
  		.ops = NULL,
  	},
  };





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux