Re: [PATCH v2 10/11] platform/x86: asus-wmi: Switch fan boost mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 11, 2019 at 1:47 PM Yurii Pavlovskyi
<yurii.pavlovskyi@xxxxxxxxx> wrote:
> * 0x00 - is normal,
> * 0x01 - is obviously turbo by the amount of noise, might be useful to
> avoid CPU frequency throttling on high load,
> * 0x02 - the meaning is unknown at the time as modes are not named
> in the vendor documentation, but it does look like a quiet mode as CPU
> temperature does increase about 10 degrees on maximum load.

I'm curious which vendor documentation you're working with here.

>From the spec,
0 = normal
1 = overboost
2 = silent

Also you can use DSTS on the 0x00110018 device to check the exact
capabilities supported, which you should use to refine which modes can
be cycled through.
Bit 0 = overboost supported
Bit 1 = silent supported

Thanks
Daniel



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux