On Mon, 2019-03-25 at 17:53 -0500, Scott Wood wrote:
> On Mon, 2019-03-25 at 11:07 +0800, Wu Hao wrote:
> > In early partial reconfiguration private feature, it only
> > supports 32bit data width when writing data to hardware for
> > PR. 512bit data width PR support is an important optimization
> > for some specific solutions (e.g. XEON with FPGA integrated),
> > it allows driver to use AVX512 instruction to improve the
> > performance of partial reconfiguration. e.g. programming one
> > 100MB bitstream image via this 512bit data width PR hardware
> > only takes ~300ms, but 32bit revision requires ~3s per test
> > result.
> >
> > Please note now this optimization is only done on revision 2
> > of this PR private feature which is only used in integrated
> > solution that AVX512 is always supported.
> >
> > Signed-off-by: Ananda Ravuri <ananda.ravuri@xxxxxxxxx>
> > Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> > Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> > ---
> > drivers/fpga/dfl-fme-main.c | 3 ++
> > drivers/fpga/dfl-fme-mgr.c | 75 +++++++++++++++++++++++++++++++++++++-
> > --
> > -----
> > drivers/fpga/dfl-fme-pr.c | 45 ++++++++++++++++-----------
> > drivers/fpga/dfl-fme.h | 2 ++
> > drivers/fpga/dfl.h | 5 +++
> > 5 files changed, 99 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> > index 086ad24..076d74f 100644
> > --- a/drivers/fpga/dfl-fme-main.c
> > +++ b/drivers/fpga/dfl-fme-main.c
> > @@ -21,6 +21,8 @@
> > #include "dfl.h"
> > #include "dfl-fme.h"
> >
> > +#define DRV_VERSION "0.8"
>
> What is this going to be used for? Under what circumstances will the
> driver version be bumped? What does it have to do with 512-bit writes?
>
> > +#if defined(CONFIG_X86) && defined(CONFIG_AS_AVX512)
> > +
> > +#include <asm/fpu/api.h>
> > +
> > +static inline void copy512(void *src, void __iomem *dst)
> > +{
> > + kernel_fpu_begin();
> > +
> > + asm volatile("vmovdqu64 (%0), %%zmm0;"
> > + "vmovntdq %%zmm0, (%1);"
> > + :
> > + : "r"(src), "r"(dst));
> > +
> > + kernel_fpu_end();
> > +}
>
> Shouldn't there be some sort of check that AVX512 is actually supported
> on the running system?
>
> Also, src should be const, and the asm statement should have a memory
> clobber.
>
> > +#else
> > +static inline void copy512(void *src, void __iomem *dst)
> > +{
> > + WARN_ON_ONCE(1);
> > +}
> > +#endif
>
> Likewise, this will be called if a revision 2 device is used on non-x86
> (or on x86 with an old binutils). The driver should fall back to 32-bit
> in such cases.
Sorry, I missed the comment about revision 2 only being on integrated
devices -- but will that always be the case? Seems worthwhile to check for
AVX512 support anyway. And there's still the possibility of being built
with an old binutils such that CONFIG_AS_AVX512 is not set, or running on a
kernel where avx512 was disabled via a boot option.
What about future revisions >= 2? Currently the driver will treat them as
if they were revision < 2. Is that intended?
-Scott
