Re: [PATCH v7 3/6] seccomp: add a way to get a listener fd from ptrace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 8, 2018 at 6:21 PM Christian Brauner <christian@xxxxxxxxxx> wrote:
> On Mon, Oct 08, 2018 at 05:33:22PM +0200, Jann Horn wrote:
> > On Mon, Oct 8, 2018 at 5:16 PM Christian Brauner <christian@xxxxxxxxxx> wrote:
> > >
> > > On Thu, Sep 27, 2018 at 09:11:16AM -0600, Tycho Andersen wrote:
> > > > As an alternative to SECCOMP_FILTER_FLAG_GET_LISTENER, perhaps a ptrace()
> > > > version which can acquire filters is useful. There are at least two reasons
> > > > this is preferable, even though it uses ptrace:
> > > >
> > > > 1. You can control tasks that aren't cooperating with you
> > > > 2. You can control tasks whose filters block sendmsg() and socket(); if the
> > > >    task installs a filter which blocks these calls, there's no way with
> > > >    SECCOMP_FILTER_FLAG_GET_LISTENER to get the fd out to the privileged task.
> > >
> > > So for the slow of mind aka me:
> > > I'm not sure I completely understand this problem. Can you outline how
> > > sendmsg() and socket() are involved in this?
> > >
> > > I'm also not sure that this holds (but I might misunderstand the
> > > problem) afaict, you could do try to get the fd out via CLONE_FILES and
> > > other means so something like:
> > >
> > > // let's pretend the libc wrapper for clone actually has sane semantics
> > > pid = clone(CLONE_FILES);
> > > if (pid == 0) {
> > >         fd = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_NEW_LISTENER, &prog);
> > >
> > >         // Now this fd will be valid in both parent and child.
> > >         // If you haven't blocked it you can inform the parent what
> > >         // the fd number is via pipe2(). If you have blocked it you can
> > >         // use dup2() and dup to a known fd number.
> > > }
> > >
> > > >
> > > > v2: fix a bug where listener mode was not unset when an unused fd was not
> > > >     available
> > > > v3: fix refcounting bug (Oleg)
> > > > v4: * change the listener's fd flags to be 0
> > > >     * rename GET_LISTENER to NEW_LISTENER (Matthew)
> > > > v5: * add capable(CAP_SYS_ADMIN) requirement
> > > > v7: * point the new listener at the right filter (Jann)
> > > >
> > > > Signed-off-by: Tycho Andersen <tycho@xxxxxxxx>
> > > > CC: Kees Cook <keescook@xxxxxxxxxxxx>
> > > > CC: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
> > > > CC: Oleg Nesterov <oleg@xxxxxxxxxx>
> > > > CC: Eric W. Biederman <ebiederm@xxxxxxxxxxxx>
> > > > CC: "Serge E. Hallyn" <serge@xxxxxxxxxx>
> > > > CC: Christian Brauner <christian.brauner@xxxxxxxxxx>
> > > > CC: Tyler Hicks <tyhicks@xxxxxxxxxxxxx>
> > > > CC: Akihiro Suda <suda.akihiro@xxxxxxxxxxxxx>
> > > > ---
> > > >  include/linux/seccomp.h                       |  7 ++
> > > >  include/uapi/linux/ptrace.h                   |  2 +
> > > >  kernel/ptrace.c                               |  4 ++
> > > >  kernel/seccomp.c                              | 31 +++++++++
> > > >  tools/testing/selftests/seccomp/seccomp_bpf.c | 68 +++++++++++++++++++
> > > >  5 files changed, 112 insertions(+)
> > > >
> > > > diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
> > > > index 017444b5efed..234c61b37405 100644
> > > > --- a/include/linux/seccomp.h
> > > > +++ b/include/linux/seccomp.h
> > > > @@ -83,6 +83,8 @@ static inline int seccomp_mode(struct seccomp *s)
> > > >  #ifdef CONFIG_SECCOMP_FILTER
> > > >  extern void put_seccomp_filter(struct task_struct *tsk);
> > > >  extern void get_seccomp_filter(struct task_struct *tsk);
> > > > +extern long seccomp_new_listener(struct task_struct *task,
> > > > +                              unsigned long filter_off);
> > > >  #else  /* CONFIG_SECCOMP_FILTER */
> > > >  static inline void put_seccomp_filter(struct task_struct *tsk)
> > > >  {
> > > > @@ -92,6 +94,11 @@ static inline void get_seccomp_filter(struct task_struct *tsk)
> > > >  {
> > > >       return;
> > > >  }
> > > > +static inline long seccomp_new_listener(struct task_struct *task,
> > > > +                                     unsigned long filter_off)
> > > > +{
> > > > +     return -EINVAL;
> > > > +}
> > > >  #endif /* CONFIG_SECCOMP_FILTER */
> > > >
> > > >  #if defined(CONFIG_SECCOMP_FILTER) && defined(CONFIG_CHECKPOINT_RESTORE)
> > > > diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
> > > > index d5a1b8a492b9..e80ecb1bd427 100644
> > > > --- a/include/uapi/linux/ptrace.h
> > > > +++ b/include/uapi/linux/ptrace.h
> > > > @@ -73,6 +73,8 @@ struct seccomp_metadata {
> > > >       __u64 flags;            /* Output: filter's flags */
> > > >  };
> > > >
> > > > +#define PTRACE_SECCOMP_NEW_LISTENER  0x420e
> > > > +
> > > >  /* Read signals from a shared (process wide) queue */
> > > >  #define PTRACE_PEEKSIGINFO_SHARED    (1 << 0)
> > > >
> > > > diff --git a/kernel/ptrace.c b/kernel/ptrace.c
> > > > index 21fec73d45d4..289960ac181b 100644
> > > > --- a/kernel/ptrace.c
> > > > +++ b/kernel/ptrace.c
> > > > @@ -1096,6 +1096,10 @@ int ptrace_request(struct task_struct *child, long request,
> > > >               ret = seccomp_get_metadata(child, addr, datavp);
> > > >               break;
> > > >
> > > > +     case PTRACE_SECCOMP_NEW_LISTENER:
> > > > +             ret = seccomp_new_listener(child, addr);
> > > > +             break;
> > > > +
> > > >       default:
> > > >               break;
> > > >       }
> > > > diff --git a/kernel/seccomp.c b/kernel/seccomp.c
> > > > index 44a31ac8373a..17685803a2af 100644
> > > > --- a/kernel/seccomp.c
> > > > +++ b/kernel/seccomp.c
> > > > @@ -1777,4 +1777,35 @@ static struct file *init_listener(struct task_struct *task,
> > > >
> > > >       return ret;
> > > >  }
> > > > +
> > > > +long seccomp_new_listener(struct task_struct *task,
> > > > +                       unsigned long filter_off)
> > > > +{
> > > > +     struct seccomp_filter *filter;
> > > > +     struct file *listener;
> > > > +     int fd;
> > > > +
> > > > +     if (!capable(CAP_SYS_ADMIN))
> > > > +             return -EACCES;
> > >
> > > I know this might have been discussed a while back but why exactly do we
> > > require CAP_SYS_ADMIN in init_userns and not in the target userns? What
> > > if I want to do a setns()fd, CLONE_NEWUSER) to the target process and
> > > use ptrace from in there?
> >
> > See https://lore.kernel.org/lkml/CAG48ez3R+ZJ1vwGkDfGzKX2mz6f=jjJWsO5pCvnH68P+RKO8Ow@xxxxxxxxxxxxxx/
> > . Basically, the problem is that this doesn't just give you capability
> > over the target task, but also over every other task that has the same
> > filter installed; you need some sort of "is the caller capable over
> > the filter and anyone who uses it" check.
>
> Thanks.
> But then this new ptrace feature as it stands is imho currently broken.
> If you can install a seccomp filter with SECCOMP_RET_USER_NOTIF if you
> are ns_cpabable(CAP_SYS_ADMIN) and also get an fd via seccomp() itself
> if you are ns_cpabable(CAP_SYS_ADMIN) then either the new ptrace() api
> extension should be fixed to allow for this too or the seccomp() way of
> retrieving the pid - which I really think we want - needs to be fixed to
> require capable(CAP_SYS_ADMIN) too.
> The solution where both require ns_capable(CAP_SYS_ADMIN) is - imho -
> the preferred way to solve this.
> Everything else will just be confusing.

First you say "broken", then you say "confusing". Which one do you mean?

Regarding requiring ns_capable() for ptrace: That means that you'll
have to stash namespace information in the seccomp filter. You'd also
potentially be eliding the LSM check that would normally have to occur
between the tracer and the tracee; but I guess that's probably fine?
CAP_SYS_ADMIN in the init namespace already has some abilities that
LSMs can't observe; you could argue that CAP_SYS_ADMIN in another
namespace should have similar semantics, but I'm not sure whether that
matches what the LSM people want as semantics.



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux