On Tue, May 1, 2018 at 9:50 PM, Wu Hao <hao.wu@xxxxxxxxx> wrote:
Hi Hao,
I understand that you are implementing support for something that
already has been defined and already exists. With that, I have some
minor suggestions below. I have some questions below about how new
features are added and suggestions for where some comments could be
added to guide anyone who is adding feature devices or sub-features so
they will do it cleanly in the way that you intend. Also some
suggestions so that when a new feature is added, less places in code
have to be touched.
> Device Feature List (DFL) defines a feature list structure that creates
> a link list of feature headers within the MMIO space to provide an
> extensible way of adding features. This patch introduces a kernel module
> to provide basic infrastructure to support FPGA devices which implement
> the Device Feature List.
>
> Usually there will be different features and their sub features linked into
> the DFL. This code provides common APIs for feature enumeration, it creates
> a container device (FPGA base region), walks through the DFLs and creates
> platform devices for feature devices (Currently it only supports two
> different feature devices, FPGA Management Engine (FME) and Port which
> the Accelerator Function Unit (AFU) connected to). In order to enumerate
> the DFLs, the common APIs required low level driver to provide necessary
> enumeration information (e.g address for each device feature list for
> given device) and fill it to the dfl_fpga_enum_info data structure. Please
> refer to below description for APIs added for enumeration.
>
> Functions for enumeration information preparation:
> *dfl_fpga_enum_info_alloc
> allocate enumeration information data structure.
>
> *dfl_fpga_enum_info_add_dfl
> add a device feature list to dfl_fpga_enum_info data structure.
>
> *dfl_fpga_enum_info_free
> free dfl_fpga_enum_info data structure and related resources.
>
> Functions for feature device enumeration:
> *dfl_fpga_enumerate_feature_devs
> enumerate feature devices and return container device.
>
> *dfl_fpga_remove_feature_devs
> remove feature devices under given container device.
How about dfl_fpga_feature_devs_enumerate/remove?
>
> Signed-off-by: Tim Whisonant <tim.whisonant@xxxxxxxxx>
> Signed-off-by: Enno Luebbers <enno.luebbers@xxxxxxxxx>
> Signed-off-by: Shiva Rao <shiva.rao@xxxxxxxxx>
> Signed-off-by: Christopher Rauer <christopher.rauer@xxxxxxxxx>
> Signed-off-by: Zhang Yi <yi.z.zhang@xxxxxxxxx>
> Signed-off-by: Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> ---
> v3: split from another patch.
> separate dfl enumeration code from original pcie driver.
> provide common data structures and APIs for enumeration.
> update device feature list parsing process according to latest hw.
> add dperf/iperf/hssi sub feature placeholder according to latest hw.
> remove build_info_add_sub_feature and other small functions.
> replace *_feature_num function with macro.
> remove writeq/readq.
> v4: fix SPDX license issue
> rename files to dfl.[ch], fix typo and add more comments.
> remove static feature_info tables for FME and Port.
> remove check on next_afu link list as only FIU has next_afu ptr.
> remove unused macro in header file.
> add more comments for functions.
> v5: add "dfl_" prefix to functions and data structures.
> remove port related functions from DFL framework.
> use BIT_ULL for 64bit register definition.
> save dfl_fpga_cdev in pdata for feature platform devices.
> rebase due to fpga region api changes.
> ---
> drivers/fpga/Kconfig | 16 ++
> drivers/fpga/Makefile | 3 +
> drivers/fpga/dfl.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/fpga/dfl.h | 279 +++++++++++++++++++
> 4 files changed, 1018 insertions(+)
> create mode 100644 drivers/fpga/dfl.c
> create mode 100644 drivers/fpga/dfl.h
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index f47ef84..01ad31f 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -124,4 +124,20 @@ config OF_FPGA_REGION
> Support for loading FPGA images by applying a Device Tree
> overlay.
>
> +config FPGA_DFL
> + tristate "FPGA Device Feature List (DFL) support"
> + select FPGA_BRIDGE
> + select FPGA_REGION
> + help
> + Device Feature List (DFL) defines a feature list structure that
> + creates a link list of feature headers within the MMIO space
> + to provide an extensible way of adding features for FPGA.
> + Driver can walk through the feature headers to enumerate feature
> + devices (e.g FPGA Management Engine, Port and Accelerator
> + Function Unit) and their private features for target FPGA devices.
> +
> + Select this option to enable common support for Field-Programmable
> + Gate Array (FPGA) solutions which implement Device Feature List.
> + It provides enumeration APIs, and feature device infrastructure.
> +
> endif # FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 3cb276a..c4c62b9 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -27,3 +27,6 @@ obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
> # High Level Interfaces
> obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o
> +
> +# FPGA Device Feature List Support
> +obj-$(CONFIG_FPGA_DFL) += dfl.o
> diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
> new file mode 100644
> index 0000000..c1462e9
> --- /dev/null
> +++ b/drivers/fpga/dfl.c
> @@ -0,0 +1,720 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for FPGA Device Feature List (DFL) Support
> + *
> + * Copyright (C) 2017 Intel Corporation, Inc.
2017-2018
> + *
> + * Authors:
> + * Kang Luwei <luwei.kang@xxxxxxxxx>
> + * Zhang Yi <yi.z.zhang@xxxxxxxxx>
> + * Wu Hao <hao.wu@xxxxxxxxx>
> + * Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> + */
> +#include <linux/module.h>
> +
> +#include "dfl.h"
> +
> +static DEFINE_MUTEX(dfl_id_mutex);
> +
> +enum dfl_id_type {
> + FME_ID, /* fme id allocation and mapping */
> + PORT_ID, /* port id allocation and mapping */
> + DFL_ID_MAX,
> +};
Please add a comment that new values of DFL_ID need to be added to this enum.
It may make sense to add dfl_chrdevs[] (from patch 7) here and add the
DFH_ID id to that struct. That would give you one struct that has all
that info together in one place and new feature drivers would be added
to it. Any translations between dfl_id, char dev name, and
dfl_fpga_devt_type could use that one table, and it could cut down on
the number of if statements and special cases involved in parsing. I
give a few examples of usage below.
> +
> +/* it is protected by dfl_id_mutex */
> +static struct idr dfl_ids[DFL_ID_MAX];
> +
> +static void dfl_ids_init(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(dfl_ids); i++)
> + idr_init(dfl_ids + i);
> +}
> +
> +static void dfl_ids_destroy(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(dfl_ids); i++)
> + idr_destroy(dfl_ids + i);
> +}
> +
> +static int alloc_dfl_id(enum dfl_id_type type, struct device *dev)
> +{
> + int id;
> +
> + WARN_ON(type >= DFL_ID_MAX);
> + mutex_lock(&dfl_id_mutex);
> + id = idr_alloc(dfl_ids + type, dev, 0, 0, GFP_KERNEL);
> + mutex_unlock(&dfl_id_mutex);
> +
> + return id;
> +}
> +
> +static void free_dfl_id(enum dfl_id_type type, int id)
> +{
> + WARN_ON(type >= DFL_ID_MAX);
> + mutex_lock(&dfl_id_mutex);
> + idr_remove(dfl_ids + type, id);
> + mutex_unlock(&dfl_id_mutex);
> +}
We discussed function name groups having a matching prefix on another
thread for another patch. Same thing here, please, such as
dfl_id_alloc/free.
> +
> +static enum dfl_id_type feature_dev_id_type(struct platform_device *pdev)
> +{
> + if (!strcmp(pdev->name, DFL_FPGA_FEATURE_DEV_FME))
> + return FME_ID;
> +
> + if (!strcmp(pdev->name, DFL_FPGA_FEATURE_DEV_PORT))
> + return PORT_ID;
Will a new if statement need to be added to this function for each
added DFH_ID? IIUC, at the point this function is called, the feature
device exists and has private data. Perhaps it is worth saving the ID
in its private data so you don't have to do this reverse lookup (and
won't have to change this function for each new feature).
Alternatively, if dfl_chrdevs[] is added in this patch, you could use
it here, using a loop that goes through and does the lookup from that
struct and you won't ever have to touch this function again.
In either case, if you add the names of your devices to a table like
dfl_chrdevs[], hopefully things can be coded such that words like
DFL_FPGA_FEATURE_DEV_FME/PORT only have to show up in that table (and
in the individual drivers).
> +
> + WARN_ON(1);
> +
> + return DFL_ID_MAX;
> +}
> +
> +/**
> + * struct build_feature_devs_info - info collected during feature dev build.
> + *
> + * @dev: device to enumerate.
> + * @cdev: the container device for all feature devices.
> + * @feature_dev: current feature device.
> + * @ioaddr: header register region address of feature device in enumeration.
> + * @sub_features: a sub features link list for feature device in enumeration.
> + * @feature_num: number of sub features for feature device in enumeration.
> + */
> +struct build_feature_devs_info {
> + struct device *dev;
> + struct dfl_fpga_cdev *cdev;
> + struct platform_device *feature_dev;
> + void __iomem *ioaddr;
> + struct list_head sub_features;
> + int feature_num;
> +};
> +
> +/**
> + * struct dfl_feature_info - sub feature info collected during feature dev build
> + *
> + * @fid: id of this sub feature.
> + * @mmio_res: mmio resource of this sub feature.
> + * @ioaddr: mapped base address of mmio resource.
> + * @node: node in sub_features link list.
> + */
> +struct dfl_feature_info {
> + u64 fid;
> + struct resource mmio_res;
> + void __iomem *ioaddr;
> + struct list_head node;
> +};
> +
> +static void dfl_fpga_cdev_add_port_dev(struct dfl_fpga_cdev *cdev,
> + struct platform_device *port)
> +{
> + struct dfl_feature_platform_data *pdata = dev_get_platdata(&port->dev);
> +
> + mutex_lock(&cdev->lock);
> + list_add(&pdata->node, &cdev->port_dev_list);
> + get_device(&pdata->dev->dev);
> + mutex_unlock(&cdev->lock);
> +}
> +
> +/*
> + * register current feature device, it is called when we need to switch to
> + * another feature parsing or we have parsed all features on given device
> + * feature list.
> + */
> +static int build_info_commit_dev(struct build_feature_devs_info *binfo)
> +{
> + struct platform_device *fdev = binfo->feature_dev;
> + struct dfl_feature_platform_data *pdata;
> + struct dfl_feature_info *finfo, *p;
> + int ret, index = 0;
> +
> + if (!fdev)
> + return 0;
> +
> + /*
> + * we do not need to care for the memory which is associated with
> + * the platform device. After calling platform_device_unregister(),
> + * it will be automatically freed by device's release() callback,
> + * platform_device_release().
> + */
> + pdata = kzalloc(dfl_feature_platform_data_size(binfo->feature_num),
> + GFP_KERNEL);
> + if (pdata) {
> + pdata->dev = fdev;
> + pdata->num = binfo->feature_num;
> + pdata->dfl_cdev = binfo->cdev;
> + mutex_init(&pdata->lock);
> + } else {
> + return -ENOMEM;
> + }
if (!pdata)
return -ENOMEM;
pdata->dev = fdev; so on
> +
> + /*
> + * the count should be initialized to 0 to make sure
> + *__fpga_port_enable() following __fpga_port_disable()
> + * works properly for port device.
> + * and it should always be 0 for fme device.
> + */
> + WARN_ON(pdata->disable_count);
> +
> + fdev->dev.platform_data = pdata;
> +
> + /* each sub feature has one MMIO resource */
> + fdev->num_resources = binfo->feature_num;
> + fdev->resource = kcalloc(binfo->feature_num, sizeof(*fdev->resource),
> + GFP_KERNEL);
> + if (!fdev->resource)
> + return -ENOMEM;
> +
> + /* fill features and resource information for feature dev */
> + list_for_each_entry_safe(finfo, p, &binfo->sub_features, node) {
> + struct dfl_feature *feature = &pdata->features[index];
> +
> + /* save resource information for each feature */
> + feature->id = finfo->fid;
> + feature->resource_index = index;
> + feature->ioaddr = finfo->ioaddr;
> + fdev->resource[index++] = finfo->mmio_res;
> +
> + list_del(&finfo->node);
> + kfree(finfo);
> + }
> +
> + ret = platform_device_add(binfo->feature_dev);
> + if (!ret) {
> + if (feature_dev_id_type(binfo->feature_dev) == PORT_ID)
> + dfl_fpga_cdev_add_port_dev(binfo->cdev,
> + binfo->feature_dev);
> + else
> + binfo->cdev->fme_dev =
> + get_device(&binfo->feature_dev->dev);
> + /*
> + * reset it to avoid build_info_free() freeing their resource.
> + *
> + * The resource of successfully registered feature devices
> + * will be freed by platform_device_unregister(). See the
> + * comments in build_info_create_dev().
> + */
> + binfo->feature_dev = NULL;
> + }
> +
> + return ret;
> +}
> +
> +static int
> +build_info_create_dev(struct build_feature_devs_info *binfo,
> + enum dfl_id_type type, const char *name,
If dfl_chrdevs[] were moved to this patch, build_info_create_dev could
use it to look up the name. That way you won't have to have separate
functions for parse_feature_fme and parse_feature_port.
> + void __iomem *ioaddr)
> +{
> + struct platform_device *fdev;
> + int ret;
> +
> + /* we will create a new device, commit current device first */
> + ret = build_info_commit_dev(binfo);
> + if (ret)
> + return ret;
> +
> + /*
> + * we use -ENODEV as the initialization indicator which indicates
> + * whether the id need to be reclaimed
> + */
> + fdev = platform_device_alloc(name, -ENODEV);
> + if (!fdev)
> + return -ENOMEM;
> +
> + binfo->feature_dev = fdev;
> + binfo->feature_num = 0;
> + binfo->ioaddr = ioaddr;
> + INIT_LIST_HEAD(&binfo->sub_features);
> +
> + fdev->id = alloc_dfl_id(type, &fdev->dev);
> + if (fdev->id < 0)
> + return fdev->id;
> +
> + fdev->dev.parent = &binfo->cdev->region->dev;
> +
> + return 0;
> +}
> +
> +static void build_info_free(struct build_feature_devs_info *binfo)
> +{
> + struct dfl_feature_info *finfo, *p;
> +
> + /*
> + * it is a valid id, free it. See comments in
> + * build_info_create_dev()
> + */
> + if (binfo->feature_dev && binfo->feature_dev->id >= 0) {
> + free_dfl_id(feature_dev_id_type(binfo->feature_dev),
> + binfo->feature_dev->id);
> +
> + list_for_each_entry_safe(finfo, p, &binfo->sub_features, node) {
> + list_del(&finfo->node);
> + kfree(finfo);
> + }
> + }
> +
> + platform_device_put(binfo->feature_dev);
> +
> + devm_kfree(binfo->dev, binfo);
> +}
> +
> +static inline u32 feature_size(void __iomem *start)
> +{
> + u64 v = readq(start + DFH);
> + u32 ofst = FIELD_GET(DFH_NEXT_HDR_OFST, v);
> + /* workaround for private features with invalid size, use 4K instead */
> + return ofst ? ofst : 4096;
> +}
> +
> +static u64 feature_id(void __iomem *start)
> +{
> + u64 v = readq(start + DFH);
> + u16 id = FIELD_GET(DFH_ID, v);
> + u8 type = FIELD_GET(DFH_TYPE, v);
> +
> + if (type == DFH_TYPE_FIU)
> + return FEATURE_ID_FIU_HEADER;
> + else if (type == DFH_TYPE_PRIVATE)
> + return id;
> + else if (type == DFH_TYPE_AFU)
> + return FEATURE_ID_AFU;
> +
> + WARN_ON(1);
> + return 0;
> +}
> +
> +/*
> + * when create sub feature instances, for private features, it doesn't need
> + * to provide resource size and feature id as they could be read from DFH
> + * register. For afu sub feature, its register region only contains user
> + * defined registers, so never trust any information from it, just use the
> + * resource size information provided by its parent FIU.
> + */
> +static int
> +create_feature_instance(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst,
> + resource_size_t size, u64 fid)
> +{
> + struct dfl_feature_info *finfo;
> +
> + /* read feature size and id if inputs are invalid */
> + size = size ? size : feature_size(dfl->ioaddr + ofst);
> + fid = fid ? fid : feature_id(dfl->ioaddr + ofst);
> +
> + if (dfl->len - ofst < size)
> + return -EINVAL;
> +
> + finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
> + if (!finfo)
> + return -ENOMEM;
> +
> + finfo->fid = fid;
> + finfo->mmio_res.start = dfl->start + ofst;
> + finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
> + finfo->mmio_res.flags = IORESOURCE_MEM;
> + finfo->ioaddr = dfl->ioaddr + ofst;
> +
> + list_add_tail(&finfo->node, &binfo->sub_features);
> + binfo->feature_num++;
> +
> + return 0;
> +}
> +
> +static int parse_feature_fme(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + int ret;
> +
> + ret = build_info_create_dev(binfo, FME_ID, DFL_FPGA_FEATURE_DEV_FME,
> + dfl->ioaddr + ofst);
> + if (ret)
> + return ret;
> +
> + return create_feature_instance(binfo, dfl, ofst, 0, 0);
> +}
> +
> +static int parse_feature_port(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + int ret;
> +
> + ret = build_info_create_dev(binfo, PORT_ID, DFL_FPGA_FEATURE_DEV_PORT,
> + dfl->ioaddr + ofst);
> + if (ret)
> + return ret;
> +
> + return create_feature_instance(binfo, dfl, ofst, 0, 0);
> +}
> +
> +static int parse_feature_port_afu(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + u64 v = readq(binfo->ioaddr + PORT_HDR_CAP);
> + u32 size = FIELD_GET(PORT_CAP_MMIO_SIZE, v) << 10;
> +
> + WARN_ON(!size);
> +
> + return create_feature_instance(binfo, dfl, ofst, size, FEATURE_ID_AFU);
> +}
> +
> +static int parse_feature_afu(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + if (!binfo->feature_dev) {
> + dev_err(binfo->dev, "this AFU does not belong to any FIU.\n");
> + return -EINVAL;
> + }
> +
> + switch (feature_dev_id_type(binfo->feature_dev)) {
> + case PORT_ID:
> + return parse_feature_port_afu(binfo, dfl, ofst);
> + default:
> + dev_info(binfo->dev, "AFU belonging to FIU %s is not supported yet.\n",
> + binfo->feature_dev->name);
> + }
> +
> + return 0;
> +}
> +
> +static int parse_feature_fiu(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + u32 id, offset;
> + u64 v;
> + int ret = 0;
> +
> + v = readq(dfl->ioaddr + ofst + DFH);
> + id = FIELD_GET(DFH_ID, v);
> +
> + switch (id) {
> + case DFH_ID_FIU_FME:
> + ret = parse_feature_fme(binfo, dfl, ofst);
> + break;
> + case DFH_ID_FIU_PORT:
> + ret = parse_feature_port(binfo, dfl, ofst);
> + break;
> + default:
> + dev_info(binfo->dev, "FIU TYPE %d is not supported yet.\n",
> + id);
> + }
If the name lookup is added to build_info_create_dev(), then this
switch statement goes away and the contents of parse_feature_fme/port
are identical and trivial enough to be included here. My reason for
looking for these things is to reduce, where possible, the places
where a function needs to be added or changed to parse each new ID.
> +
> + if (ret)
> + return ret;
> +
> + /* Find and parse FIU's child AFU via its NEXT_AFU register */
> + v = readq(dfl->ioaddr + ofst + NEXT_AFU);
> +
> + offset = FIELD_GET(NEXT_AFU_NEXT_DFH_OFST, v);
> + if (offset)
> + return parse_feature_afu(binfo, dfl, ofst + offset);
> +
> + dev_dbg(binfo->dev, "No AFUs detected on FIU %d\n", id);
> +
> + return ret;
> +}
> +
> +static int parse_feature_private(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl,
> + resource_size_t ofst)
> +{
> + if (!binfo->feature_dev) {
> + dev_err(binfo->dev, "the private feature %llx does not belong to any AFU.\n",
> + (unsigned long long)feature_id(dfl->ioaddr + ofst));
> + return -EINVAL;
> + }
> +
> + return create_feature_instance(binfo, dfl, ofst, 0, 0);
> +}
> +
> +/**
> + * parse_feature - parse a feature on given device feature list
> + *
> + * @binfo: build feature devices information.
> + * @dfl: device feature list to parse
> + * @ofst: offset to feature header on this device feature list
> + */
> +static int parse_feature(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst)
> +{
> + u64 v;
> + u32 type;
> +
> + v = readq(dfl->ioaddr + ofst + DFH);
> + type = FIELD_GET(DFH_TYPE, v);
> +
> + switch (type) {
> + case DFH_TYPE_AFU:
> + return parse_feature_afu(binfo, dfl, ofst);
> + case DFH_TYPE_PRIVATE:
> + return parse_feature_private(binfo, dfl, ofst);
> + case DFH_TYPE_FIU:
> + return parse_feature_fiu(binfo, dfl, ofst);
> + default:
> + dev_info(binfo->dev,
> + "Feature Type %x is not supported.\n", type);
> + }
> +
> + return 0;
> +}
> +
> +static int parse_feature_list(struct build_feature_devs_info *binfo,
> + struct dfl_fpga_enum_dfl *dfl)
> +{
> + void __iomem *start = dfl->ioaddr;
> + void __iomem *end = dfl->ioaddr + dfl->len;
> + int ret = 0;
> + u32 ofst = 0;
> + u64 v;
> +
> + /* walk through the device feature list via DFH's next DFH pointer. */
> + for (; start < end; start += ofst) {
> + if (end - start < DFH_SIZE) {
> + dev_err(binfo->dev, "The region is too small to contain a feature.\n");
> + return -EINVAL;
> + }
> +
> + ret = parse_feature(binfo, dfl, start - dfl->ioaddr);
> + if (ret)
> + return ret;
> +
> + v = readq(start + DFH);
> + ofst = FIELD_GET(DFH_NEXT_HDR_OFST, v);
> +
> + /* stop parsing if EOL(End of List) is set or offset is 0 */
> + if ((v & DFH_EOL) || !ofst)
> + break;
> + }
> +
> + /* commit current feature device when reach the end of list */
> + return build_info_commit_dev(binfo);
> +}
> +
> +struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev)
> +{
> + struct dfl_fpga_enum_info *info;
> +
> + get_device(dev);
> +
> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> + if (!info) {
> + put_device(dev);
> + return NULL;
> + }
> +
> + info->dev = dev;
> + INIT_LIST_HEAD(&info->dfls);
> +
> + return info;
> +}
> +EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_alloc);
> +
> +void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info)
> +{
> + struct dfl_fpga_enum_dfl *tmp, *dfl;
> + struct device *dev;
> +
> + if (!info)
> + return;
> +
> + dev = info->dev;
> +
> + /* remove all device feature lists in the list. */
> + list_for_each_entry_safe(dfl, tmp, &info->dfls, node) {
> + list_del(&dfl->node);
> + devm_kfree(dev, dfl);
> + }
> +
> + devm_kfree(dev, info);
> + put_device(dev);
> +}
> +EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_free);
> +
> +/**
> + * dfl_fpga_enum_info_add_dfl - add info of a device feature list to enum info
> + *
> + * @info: ptr to dfl_fpga_enum_info
> + * @start: mmio resource address of the device feature list.
> + * @len: mmio resource length of the device feature list.
> + * @ioaddr: mapped mmio resource address of the device feature list.
> + *
> + * One FPGA device may have 1 or more Device Feature Lists (DFLs), use this
> + * function to add information of each DFL to common data structure for next
> + * step enumeration.
> + *
> + * Return: 0 on success, negative error code otherwise.
> + */
> +int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
> + resource_size_t start, resource_size_t len,
> + void __iomem *ioaddr)
> +{
> + struct dfl_fpga_enum_dfl *dfl;
> +
> + dfl = devm_kzalloc(info->dev, sizeof(*dfl), GFP_KERNEL);
> + if (!dfl)
> + return -ENOMEM;
> +
> + dfl->start = start;
> + dfl->len = len;
> + dfl->ioaddr = ioaddr;
> +
> + list_add_tail(&dfl->node, &info->dfls);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_add_dfl);
> +
> +static int remove_feature_dev(struct device *dev, void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + enum dfl_id_type type = feature_dev_id_type(pdev);
> + int id = pdev->id;
> +
> + platform_device_unregister(pdev);
> +
> + free_dfl_id(type, id);
> +
> + return 0;
> +}
> +
> +static void remove_feature_devs(struct dfl_fpga_cdev *cdev)
> +{
> + device_for_each_child(&cdev->region->dev, NULL, remove_feature_dev);
> +}
> +
> +/**
> + * dfl_fpga_enumerate_feature_devs - enumerate feature devices
> + * @info: information for enumeration.
> + *
> + * This function creates a container device (base FPGA region), enumerates
> + * feature devices based on the enumeration info and creates platform devices
> + * under the container device.
> + *
> + * Return: dfl_fpga_cdev struct on success, -errno on failure
> + */
> +struct dfl_fpga_cdev *
> +dfl_fpga_enumerate_feature_devs(struct dfl_fpga_enum_info *info)
> +{
> + struct build_feature_devs_info *binfo;
> + struct dfl_fpga_enum_dfl *dfl;
> + struct dfl_fpga_cdev *cdev;
> + int ret = 0;
> +
> + if (!info->dev)
> + return ERR_PTR(-ENODEV);
> +
> + cdev = devm_kzalloc(info->dev, sizeof(*cdev), GFP_KERNEL);
> + if (!cdev)
> + return ERR_PTR(-ENOMEM);
> +
> + cdev->region = fpga_region_create(info->dev, NULL, NULL);
> + if (!cdev->region) {
> + ret = -ENOMEM;
> + goto free_region_exit;
> + }
> +
> + cdev->parent = info->dev;
> + mutex_init(&cdev->lock);
> + INIT_LIST_HEAD(&cdev->port_dev_list);
> +
> + ret = fpga_region_register(cdev->region);
> + if (ret)
> + goto free_cdev_exit;
> +
> + /* create and init build info for enumeration */
> + binfo = devm_kzalloc(info->dev, sizeof(*binfo), GFP_KERNEL);
> + if (!binfo) {
> + ret = -ENOMEM;
> + goto unregister_region_exit;
> + }
> +
> + binfo->dev = info->dev;
> + binfo->cdev = cdev;
> +
> + /*
> + * start enumeration for all feature devices based on Device Feature
> + * Lists.
> + */
> + list_for_each_entry(dfl, &info->dfls, node) {
> + ret = parse_feature_list(binfo, dfl);
> + if (ret) {
> + remove_feature_devs(cdev);
> + build_info_free(binfo);
> + goto unregister_region_exit;
> + }
> + }
> +
> + build_info_free(binfo);
> +
> + return cdev;
> +
> +unregister_region_exit:
> + fpga_region_unregister(cdev->region);
> +free_region_exit:
> + fpga_region_free(cdev->region);
> +free_cdev_exit:
> + devm_kfree(info->dev, cdev);
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(dfl_fpga_enumerate_feature_devs);
> +
> +/**
> + * dfl_fpga_remove_feature_devs - remove all feature devices
> + * @cdev: fpga container device.
> + *
> + * Remove the container device and all feature devices under given container
> + * devices.
> + */
> +void dfl_fpga_remove_feature_devs(struct dfl_fpga_cdev *cdev)
> +{
> + struct dfl_feature_platform_data *pdata, *ptmp;
> +
> + remove_feature_devs(cdev);
> +
> + mutex_lock(&cdev->lock);
> + if (cdev->fme_dev) {
> + /* the fme should be unregistered. */
> + WARN_ON(device_is_registered(cdev->fme_dev));
> + put_device(cdev->fme_dev);
> + }
> +
> + list_for_each_entry_safe(pdata, ptmp, &cdev->port_dev_list, node) {
> + struct platform_device *port_dev = pdata->dev;
> +
> + /* the port should be unregistered. */
> + WARN_ON(device_is_registered(&port_dev->dev));
> + list_del(&pdata->node);
> + put_device(&port_dev->dev);
> + }
> + mutex_unlock(&cdev->lock);
> +
> + fpga_region_unregister(cdev->region);
> + devm_kfree(cdev->parent, cdev);
> +}
> +EXPORT_SYMBOL_GPL(dfl_fpga_remove_feature_devs);
> +
> +static int __init dfl_fpga_init(void)
> +{
> + dfl_ids_init();
> +
> + return 0;
> +}
> +
> +static void __exit dfl_fpga_exit(void)
> +{
> + dfl_ids_destroy();
> +}
> +
> +module_init(dfl_fpga_init);
> +module_exit(dfl_fpga_exit);
> +
> +MODULE_DESCRIPTION("FPGA Device Feature List (DFL) Support");
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> new file mode 100644
> index 0000000..2ede915
> --- /dev/null
> +++ b/drivers/fpga/dfl.h
> @@ -0,0 +1,279 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Driver Header File for FPGA Device Feature List (DFL) Support
> + *
> + * Copyright (C) 2017 Intel Corporation, Inc.
> + *
> + * Authors:
> + * Kang Luwei <luwei.kang@xxxxxxxxx>
> + * Zhang Yi <yi.z.zhang@xxxxxxxxx>
> + * Wu Hao <hao.wu@xxxxxxxxx>
> + * Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> + */
> +
> +#ifndef __FPGA_DFL_H
> +#define __FPGA_DFL_H
> +
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/iopoll.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/uuid.h>
> +#include <linux/fpga/fpga-region.h>
> +
> +/* maximum supported number of ports */
> +#define MAX_DFL_FPGA_PORT_NUM 4
> +/* plus one for fme device */
> +#define MAX_DFL_FEATURE_DEV_NUM (MAX_DFL_FPGA_PORT_NUM + 1)
> +
> +/* Reserved 0x0 for Header Group Register and 0xff for AFU */
> +#define FEATURE_ID_FIU_HEADER 0x0
> +#define FEATURE_ID_AFU 0xff
> +
> +#define FME_FEATURE_ID_HEADER FEATURE_ID_FIU_HEADER
> +#define FME_FEATURE_ID_THERMAL_MGMT 0x1
> +#define FME_FEATURE_ID_POWER_MGMT 0x2
> +#define FME_FEATURE_ID_GLOBAL_IPERF 0x3
> +#define FME_FEATURE_ID_GLOBAL_ERR 0x4
> +#define FME_FEATURE_ID_PR_MGMT 0x5
> +#define FME_FEATURE_ID_HSSI 0x6
> +#define FME_FEATURE_ID_GLOBAL_DPERF 0x7
> +
> +#define PORT_FEATURE_ID_HEADER FEATURE_ID_FIU_HEADER
> +#define PORT_FEATURE_ID_AFU FEATURE_ID_AFU
> +#define PORT_FEATURE_ID_ERROR 0x10
> +#define PORT_FEATURE_ID_UMSG 0x11
> +#define PORT_FEATURE_ID_UINT 0x12
> +#define PORT_FEATURE_ID_STP 0x13
> +
> +/*
> + * Device Feature Header Register Set
> + *
> + * For FIUs, they all have DFH + GUID + NEXT_AFU as common header registers.
> + * For AFUs, they have DFH + GUID as common header registers.
> + * For private features, they only have DFH register as common header.
> + */
> +#define DFH 0x0
> +#define GUID_L 0x8
> +#define GUID_H 0x10
> +#define NEXT_AFU 0x18
> +
> +#define DFH_SIZE 0x8
> +
> +/* Device Feature Header Register Bitfield */
> +#define DFH_ID GENMASK_ULL(11, 0) /* Feature ID */
> +#define DFH_ID_FIU_FME 0
> +#define DFH_ID_FIU_PORT 1
> +#define DFH_REVISION GENMASK_ULL(15, 12) /* Feature revision */
> +#define DFH_NEXT_HDR_OFST GENMASK_ULL(39, 16) /* Offset to next DFH */
> +#define DFH_EOL BIT_ULL(40) /* End of list */
> +#define DFH_TYPE GENMASK_ULL(63, 60) /* Feature type */
> +#define DFH_TYPE_AFU 1
> +#define DFH_TYPE_PRIVATE 3
> +#define DFH_TYPE_FIU 4
> +
> +/* Next AFU Register Bitfield */
> +#define NEXT_AFU_NEXT_DFH_OFST GENMASK_ULL(23, 0) /* Offset to next AFU */
> +
> +/* FME Header Register Set */
> +#define FME_HDR_DFH DFH
> +#define FME_HDR_GUID_L GUID_L
> +#define FME_HDR_GUID_H GUID_H
> +#define FME_HDR_NEXT_AFU NEXT_AFU
> +#define FME_HDR_CAP 0x30
> +#define FME_HDR_PORT_OFST(n) (0x38 + ((n) * 0x8))
> +#define FME_HDR_BITSTREAM_ID 0x60
> +#define FME_HDR_BITSTREAM_MD 0x68
> +
> +/* FME Fab Capability Register Bitfield */
> +#define FME_CAP_FABRIC_VERID GENMASK_ULL(7, 0) /* Fabric version ID */
> +#define FME_CAP_SOCKET_ID BIT_ULL(8) /* Socket ID */
> +#define FME_CAP_PCIE0_LINK_AVL BIT_ULL(12) /* PCIE0 Link */
> +#define FME_CAP_PCIE1_LINK_AVL BIT_ULL(13) /* PCIE1 Link */
> +#define FME_CAP_COHR_LINK_AVL BIT_ULL(14) /* Coherent Link */
> +#define FME_CAP_IOMMU_AVL BIT_ULL(16) /* IOMMU available */
> +#define FME_CAP_NUM_PORTS GENMASK_ULL(19, 17) /* Number of ports */
> +#define FME_CAP_ADDR_WIDTH GENMASK_ULL(29, 24) /* Address bus width */
> +#define FME_CAP_CACHE_SIZE GENMASK_ULL(43, 32) /* cache size in KB */
> +#define FME_CAP_CACHE_ASSOC GENMASK_ULL(47, 44) /* Associativity */
> +
> +/* FME Port Offset Register Bitfield */
> +/* Offset to port device feature header */
> +#define FME_PORT_OFST_DFH_OFST GENMASK_ULL(23, 0)
> +/* PCI Bar ID for this port */
> +#define FME_PORT_OFST_BAR_ID GENMASK_ULL(34, 32)
> +/* AFU MMIO access permission. 1 - VF, 0 - PF. */
> +#define FME_PORT_OFST_ACC_CTRL BIT_ULL(55)
> +#define FME_PORT_OFST_ACC_PF 0
> +#define FME_PORT_OFST_ACC_VF 1
> +#define FME_PORT_OFST_IMP BIT_ULL(60)
> +
> +/* PORT Header Register Set */
> +#define PORT_HDR_DFH DFH
> +#define PORT_HDR_GUID_L GUID_L
> +#define PORT_HDR_GUID_H GUID_H
> +#define PORT_HDR_NEXT_AFU NEXT_AFU
> +#define PORT_HDR_CAP 0x30
> +#define PORT_HDR_CTRL 0x38
> +
> +/* Port Capability Register Bitfield */
> +#define PORT_CAP_PORT_NUM GENMASK_ULL(1, 0) /* ID of this port */
> +#define PORT_CAP_MMIO_SIZE GENMASK_ULL(23, 8) /* MMIO size in KB */
> +#define PORT_CAP_SUPP_INT_NUM GENMASK_ULL(35, 32) /* Interrupts num */
> +
> +/* Port Control Register Bitfield */
> +#define PORT_CTRL_SFTRST BIT_ULL(0) /* Port soft reset */
> +/* Latency tolerance reporting. '1' >= 40us, '0' < 40us.*/
> +#define PORT_CTRL_LATENCY BIT_ULL(2)
> +#define PORT_CTRL_SFTRST_ACK BIT_ULL(4) /* HW ack for reset */
> +
> +/**
> + * struct dfl_feature - sub feature of the feature devices
> + *
> + * @id: sub feature id.
> + * @resource_index: each sub feature has one mmio resource for its registers.
> + * this index is used to find its mmio resource from the
> + * feature dev (platform device)'s reources.
> + * @ioaddr: mapped mmio resource address.
> + */
> +struct dfl_feature {
> + u64 id;
> + int resource_index;
> + void __iomem *ioaddr;
> +};
> +
> +/**
> + * struct dfl_feature_platform_data - platform data for feature devices
> + *
> + * @node: node to link feature devs to container device's port_dev_list.
> + * @lock: mutex to protect platform data.
> + * @dev: ptr to platform device linked with this platform data.
> + * @dfl_cdev: ptr to container device.
> + * @disable_count: count for port disable.
> + * @num: number for sub features.
> + * @features: sub features of this feature dev.
> + */
> +struct dfl_feature_platform_data {
> + struct list_head node;
> + struct mutex lock;
> + struct platform_device *dev;
> + struct dfl_fpga_cdev *dfl_cdev;
> + unsigned int disable_count;
> +
> + int num;
> + struct dfl_feature features[0];
> +};
> +
> +#define DFL_FPGA_FEATURE_DEV_FME "dfl-fme"
> +#define DFL_FPGA_FEATURE_DEV_PORT "dfl-port"
> +
> +static inline int dfl_feature_platform_data_size(const int num)
> +{
> + return sizeof(struct dfl_feature_platform_data) +
> + num * sizeof(struct dfl_feature);
> +}
> +
> +#define dfl_fpga_dev_for_each_feature(pdata, feature) \
> + for ((feature) = (pdata)->features; \
> + (feature) < (pdata)->features + (pdata)->num; (feature)++)
> +
> +static inline
> +struct dfl_feature *dfl_get_feature_by_id(struct device *dev, u64 id)
> +{
> + struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
> + struct dfl_feature *feature;
> +
> + dfl_fpga_dev_for_each_feature(pdata, feature)
> + if (feature->id == id)
> + return feature;
> +
> + return NULL;
> +}
> +
> +static inline
> +void __iomem *dfl_get_feature_ioaddr_by_id(struct device *dev, u64 id)
> +{
> + struct dfl_feature *feature = dfl_get_feature_by_id(dev, id);
> +
> + if (feature && feature->ioaddr)
> + return feature->ioaddr;
> +
> + WARN_ON(1);
> + return NULL;
> +}
> +
> +static inline bool dfl_feature_is_fme(void __iomem *base)
> +{
> + u64 v = readq(base + DFH);
> +
> + return (FIELD_GET(DFH_TYPE, v) == DFH_TYPE_FIU) &&
> + (FIELD_GET(DFH_ID, v) == DFH_ID_FIU_FME);
> +}
> +
> +static inline bool dfl_feature_is_port(void __iomem *base)
> +{
> + u64 v = readq(base + DFH);
> +
> + return (FIELD_GET(DFH_TYPE, v) == DFH_TYPE_FIU) &&
> + (FIELD_GET(DFH_ID, v) == DFH_ID_FIU_PORT);
> +}
> +
> +/**
> + * struct dfl_fpga_enum_info - DFL FPGA enumeration information
> + *
> + * @dev: parent device.
> + * @dfls: list of device feature lists.
> + */
> +struct dfl_fpga_enum_info {
> + struct device *dev;
> + struct list_head dfls;
> +};
> +
> +/**
> + * struct dfl_fpga_enum_dfl - DFL FPGA enumeration device feature list info
> + *
> + * @start: base address of this device feature list.
> + * @len: size of this device feature list.
> + * @ioaddr: mapped base address of this device feature list.
> + * @node: node in list of device feature lists.
> + */
> +struct dfl_fpga_enum_dfl {
> + resource_size_t start;
> + resource_size_t len;
> +
> + void __iomem *ioaddr;
> +
> + struct list_head node;
> +};
> +
> +struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev);
> +int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
> + resource_size_t start, resource_size_t len,
> + void __iomem *ioaddr);
> +void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info);
> +
> +/**
> + * struct dfl_fpga_cdev - container device of DFL based FPGA
> + *
> + * @parent: parent device of this container device.
> + * @region: base fpga region.
> + * @fme_dev: FME feature device under this container device.
> + * @lock: mutex lock to protect the port device list.
> + * @port_dev_list: list of all port feature devices under this container device.
> + */
> +struct dfl_fpga_cdev {
> + struct device *parent;
> + struct fpga_region *region;
> + struct device *fme_dev;
> + struct mutex lock;
> + struct list_head port_dev_list;
> +};
> +
> +struct dfl_fpga_cdev *
> +dfl_fpga_enumerate_feature_devs(struct dfl_fpga_enum_info *info);
> +void dfl_fpga_remove_feature_devs(struct dfl_fpga_cdev *cdev);
> +
> +#endif /* __FPGA_DFL_H */
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
