On Thu, Dec 21, 2017 at 03:22:42PM +0800, Wu Hao wrote:
> On Wed, Dec 20, 2017 at 06:58:01PM -0600, Alan Tull wrote:
> > On Wed, Dec 20, 2017 at 4:29 PM, Alan Tull <atull@xxxxxxxxxx> wrote:
> > > On Mon, Nov 27, 2017 at 12:42 AM, Wu Hao <hao.wu@xxxxxxxxx> wrote:
> > >
> > > Hi Hao,
> > >
> > >> +
> > >> +enum port_feature_id {
> > >> + PORT_FEATURE_ID_HEADER = 0x0,
> > >> + PORT_FEATURE_ID_ERROR = 0x1,
> > >> + PORT_FEATURE_ID_UMSG = 0x2,
> > >> + PORT_FEATURE_ID_PR = 0x3,
> > >> + PORT_FEATURE_ID_STP = 0x4,
> > >> + PORT_FEATURE_ID_UAFU = 0x5,
> > >> + PORT_FEATURE_ID_MAX = 0x6,
> > >> +};
> > >> +
> > >> +#define FME_FEATURE_NUM FME_FEATURE_ID_MAX
> > >> +#define PORT_FEATURE_NUM PORT_FEATURE_ID_MAX
> > >> +
> > >> +#define FPGA_FEATURE_DEV_FME "fpga-dfl-fme"
> > >> +#define FPGA_FEATURE_DEV_PORT "fpga-dfl-port"
> > >> +
> > >> +static inline int feature_platform_data_size(const int num)
> > >> +{
> > >> + return sizeof(struct feature_platform_data) +
> > >> + num * sizeof(struct feature);
> > >> +}
> > >> +
> > >> +int fpga_port_id(struct platform_device *pdev);
> > >> +
> > >> +static inline int fpga_port_check_id(struct platform_device *pdev,
> > >> + void *pport_id)
> > >> +{
> > >> + return fpga_port_id(pdev) == *(int *)pport_id;
> > >> +}
> > >> +
> > >> +void __fpga_port_enable(struct platform_device *pdev);
> > >> +int __fpga_port_disable(struct platform_device *pdev);
> > >> +
> > >> +static inline void fpga_port_enable(struct platform_device *pdev)
> > >> +{
> > >> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > >> +
> > >> + mutex_lock(&pdata->lock);
> > >> + __fpga_port_enable(pdev);
> > >> + mutex_unlock(&pdata->lock);
> > >> +}
> > >> +
> > >> +static inline int fpga_port_disable(struct platform_device *pdev)
> > >> +{
> > >> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > >> + int ret;
> > >> +
> > >> + mutex_lock(&pdata->lock);
> > >> + ret = __fpga_port_disable(pdev);
> > >> + mutex_unlock(&pdata->lock);
> > >> +
> > >> + return ret;
> > >> +}
> > >> +
> > >> +static inline int __fpga_port_reset(struct platform_device *pdev)
> > >> +{
> > >> + int ret;
> > >> +
> > >> + ret = __fpga_port_disable(pdev);
> > >> + if (ret)
> > >> + return ret;
> > >> +
> > >> + __fpga_port_enable(pdev);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static inline int fpga_port_reset(struct platform_device *pdev)
> > >> +{
> > >> + struct feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > >> + int ret;
> > >> +
> > >> + mutex_lock(&pdata->lock);
> > >> + ret = __fpga_port_reset(pdev);
> > >> + mutex_unlock(&pdata->lock);
> > >> +
> > >> + return ret;
> > >> +}
> > >
> > > I see that the port code is included as part of the enumeration code.
> > > This is not very future-proofed, if a different port needs to be
> > > supported.
> > >
> > > The port is a FPGA fabric based bridge with expanded functionality,
> > > right? So it is similar to the altera freeze bridge, but adds the
> > > ability to reset the fabric and some other features are promised in
> > > the future, IIUC. I still think that the port could be implemented in
> > > the bridge driver .c file instead of being here as part of the
> > > enumeration code. For that to happen, some APIs would need to be
> > > added to the bridge framework and the FPGA region framework. Then the
> > > reset can be requested through a new FPGA region API function.
> > >
> > > The advantage of this is that if this patchset evolves and there is
> > > some other v2 port driver needed, it can be a different driver if it
> > > needs to be.
> > >
> > > If the port reset is really a fabric reset,
> >
> > Actually 'fabric reset' is probably not clear enough. It's resetting
> > the hardware in a partial reconfiguration region, not just resetting
> > the bridge. I'm trying to come up with a term that makes that clear
> > what is getting reset is the contents of the region.
> >
> > > (correct me if I'm
> > > remembering wrongly) then it would be helpful to call it a
> > > fabric_reset. This would be the first bridge driver supporting fabric
> > > reset. I think it won't be the last.
> > >
> > > So what I'm proposing would be added/changed would be:
> > > * move all the bridge code to fpga-dfl-fme-br.c
> > > * add .fabric_reset to bridge ops
> > > * add fpga_bridges_reset to fpga-bridge.c (a new function that goes
> > > through a list of bridges and calls the reset ops if it exists,
> > > ignores the bridges where it doesn't exist)
> > > * add fpga_region_fabric_reset to fpga-region.c. This function gets
> > > the region, gets the bridges, calls fpga_bridges_reset (can steal code
> > > from fpga_region_program_fpga)
> > > * the rest of the patchset can use fpga_region_fabric_reset instead of
> > > fpga_port_reset
>
> Hi Alan
>
> Actually I think we can't move all the bridge code to fpga-dfl-fme-br.c as
> this bridge (and region) is created by FME PR sub feature code, mainly for
> PR function. But user may need the reset function when run some workload
> on target Port/AFU, if consider virtualization case (SRIOV), there is only
> Port/AFU in each VF, and no FME in VF (that means nobody creates the fpga
> region/bridge/region). So it's need from port platform driver side as well.
>
> The orignal idea that creates fpga-mgr/bridges/regions under FME, is that
> even we turned all Ports/AFUs into VFs (user can not see port platform
> device and the user interfaces exposed by port driver on PF), but user
> still can use FME to do PR to those Ports/AFUs in turned into VFs (assigned
> in different virtual machines).
>
> I fully agree with you, that we should avoid feature specific code in the
> common enumeration code and feature device framework if possible. I guess
> I need some time to check and see if any other solutions (e.g export those
> functions from port driver not DFL framework). Will back here once I have
> some clear idea.:)
Hi Alan
I checked further on this, it seems no good method to avoid feature_dev
specific code (e.g port/fme related code) in DFL framework, as it needs to
manage feature devices for virtualization cases. I tried that, make some
changes that the port reset code could be exported by the port platform
device instead, and fpga-dfl-fme-br.c depends on port platform device to
implement the bridge ops, but 1) it introduced more dependency between
these driver modules which seems not good. (ideally it's better that PR
could be done by FME module itself, no need to have some dependency on
other modules, e.g Port). 2) still have other port code (e.g fpga_port_id
which is useful for port management code in framework) can't be moved to
port platform driver module in the same method. As hardware is designed
this way, even we see separated device features in the DFL, but they have
a lot of dependency internally in different use cases (e.g PR, SRIOV and
etc).
Thanks
Hao
>
> Thanks
> Hao
>
> > >
> > > Alan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
