Re: [PATCH v10 2/3] arm/syscalls: Check address limit on user-mode return

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2017-07-18 at 09:04 -0700, Thomas Garnier wrote:
> On Tue, Jul 18, 2017 at 7:36 AM, Leonard Crestez <leonard.crestez@xxxxxxx> wrote:
> > 
> > On Wed, 2017-06-14 at 18:12 -0700, Thomas Garnier wrote:
> > > 
> > > Ensure the address limit is a user-mode segment before returning to
> > > user-mode. Otherwise a process can corrupt kernel-mode memory and
> > > elevate privileges [1].
> > > 
> > > The set_fs function sets the TIF_SETFS flag to force a slow path on
> > > return. In the slow path, the address limit is checked to be USER_DS if
> > > needed.
> > > 
> > > The TIF_SETFS flag is added to _TIF_WORK_MASK shifting _TIF_SYSCALL_WORK
> > > for arm instruction immediate support. The global work mask is too big
> > > to used on a single instruction so adapt ret_fast_syscall.
> > > 
> > > @@ -571,6 +572,10 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
> > >        * Update the trace code with the current status.
> > >        */
> > >       trace_hardirqs_off();
> > > +
> > > +     /* Check valid user FS if needed */
> > > +     addr_limit_user_check();
> > > +
> > >       do {
> > >               if (likely(thread_flags & _TIF_NEED_RESCHED)) {
> > >                       schedule();
> > This patch made it's way into linux-next next-20170717 and it seems to
> > cause hangs when booting some boards over NFS (found via bisection). I
> > don't know exactly what determines the issue but I can reproduce hangs
> > if even if I just boot with init=/bin/bash and do stuff like
> > 
> > # sleep 1 & sleep 1 & sleep 1 & wait; wait; wait; echo done!
> > 
> > When this happens sysrq-t shows a sleep task hung in the 'R' state
> > spinning in do_work_pending, so maybe there is a potential infinite
> > loop here?
> > 
> > The addr_limit_user_check at the start of do_work_pending will check
> > for TIF_FSCHECK once and clear it but the function loops while
> > (thread_flags & _TIF_WORK_MASK), so it if TIF_FSCHECK is set again then
> > the loop will never terminate. Does this make sense?

> Yes, it does. Thanks for looking into this.

> > I added some instrumentation to check if TIF_FSCHECK can show up during
> > the do_work_pending loop and the answer seems to be yes. I also tried
> > to get a stack with a set_fs call from inside do_work_pending and got
> > the following:
> > 
> > [  227.582402] CPU: 0 PID: 829 Comm: sleep Not tainted 4.12.0-01057-g93af8f7-dirty #332
> > [  227.590171] Hardware name: Freescale i.MX6 SoloLite (Device Tree)
> > [  227.596275] Backtrace:
> > [  227.598754] [] (dump_backtrace) from [] (show_stack+0x18/0x1c)
> > [  227.606339]  r7:00000000 r6:60070113 r5:00000000 r4:c105a958
> > [  227.612016] [] (show_stack) from [] (dump_stack+0xb4/0xe8)
> > [  227.619258] [] (dump_stack) from [] (mydbg_set_fs+0x40/0x48)
> > [  227.626671]  r9:c08cf35c r8:ee1cda7c r7:ee1e3dce r6:bf000000 r5:00000000 r4:ffffe000
> > [  227.634433] [] (mydbg_set_fs) from [] (__probe_kernel_read+0x44/0xd0)
> > [  227.642629] [] (__probe_kernel_read) from [] (do_alignment+0x8c/0x75c)
> > [  227.650909]  r10:ef085000 r9:c08cf35c r8:00000001 r7:ee1e3dce r6:c011b84c r5:ee1cdbe0
> > [  227.658748]  r4:00000000 r3:00000000
> > [  227.662338] [] (do_alignment) from [] (do_DataAbort+0x40/0xc0)
> > [  227.669921]  r10:ef085000 r9:ee1cc000 r8:ee1cdbe0 r7:ee1e3dce r6:c011b84c r5:00000001
> > [  227.677760]  r4:c100dd3c
> > [  227.680308] [] (do_DataAbort) from [] (__dabt_svc+0x64/0xa0)
> > [  227.687714] Exception stack(0xee1cdbe0 to 0xee1cdc28)
> > [  227.692780] dbe0: 9064a8c0 ee1e3de2 d82727d8 00000000 ee1b20c0 ee1e3dce 00000000 ef08572c
> > [  227.700971] dc00: c0bb2034 c10c75ea ef085000 ee1cdc74 ee1cdc00 ee1cdc30 c01761a8 c08cf35c
> > [  227.709158] dc20: 40070113 ffffffff
> > [  227.712661]  r8:c0bb2034 r7:ee1cdc14 r6:ffffffff r5:40070113 r4:c08cf35c
> > [  227.719382] [] (inet_gro_receive) from [] (dev_gro_receive+0x2f0/0x618)
> > [  227.727746]  r10:ef085000 r9:00000001 r8:00000000 r7:ef085710 r6:c1008b88 r5:ee1b20c0
> > [  227.735585]  r4:c1009f78
> > [  227.738132] [] (dev_gro_receive) from [] (napi_gro_receive+0x78/0x1f4)
> > [  227.746410]  r10:ef085000 r9:00000001 r8:c10d15ec r7:c100792c r6:ef085710 r5:c10c744e
> > [  227.754249]  r4:ee1b20c0
> > [  227.756801] [] (napi_gro_receive) from [] (fec_enet_rx_napi+0x39c/0x988)
> > [  227.765253]  r9:00000001 r8:f0c8a960 r7:00000000 r6:00000000 r5:ef086000 r4:ee1b20c0
> > [  227.773010] [] (fec_enet_rx_napi) from [] (net_rx_action+0x21c/0x474)
> > [  227.781201]  r10:ee1cdd78 r9:c0fa7b80 r8:ef7dab80 r7:0000012c r6:00000040 r5:00000001
> > [  227.789039]  r4:ef085710
> > [  227.791593] [] (net_rx_action) from [] (__do_softirq+0x158/0x534)
> > [  227.799437]  r10:00000008 r9:ee1cc000 r8:c10ce568 r7:c100792c r6:c10247bd r5:00000003
> > [  227.807275]  r4:c100208c
> > [  227.809824] [] (__do_softirq) from [] (irq_exit+0xec/0x168)
> > [  227.817147]  r10:c1007ea0 r9:ef010400 r8:00000001 r7:00000000 r6:c1007d3c r5:00000000
> > [  227.824984]  r4:c0fa534c
> > [  227.827534] [] (irq_exit) from [] (__handle_domain_irq+0x74/0xe8)
> > [  227.835377] [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0xbc)
> > [  227.843742]  r9:f080b100 r8:c105ae80 r7:ee1cde80 r6:000003ff r5:000003eb r4:f080b10c
> > [  227.851498] [] (gic_handle_irq) from [] (__irq_svc+0x70/0x98)
> > [  227.858990] Exception stack(0xee1cde80 to 0xee1cdec8)
> > [  227.864056] de80: ee7a1140 00000001 00000000 000012a9 ee7a1140 ee9d9f10 ee76edc0 ee9d9f60
> > [  227.872248] dea0: 00000000 ee9d9f10 00000010 ee1cdeec ee1cdeb8 ee1cded0 c038a77c c0389688
> > [  227.880434] dec0: 60070013 ffffffff
> > [  227.883937]  r10:00000010 r9:ee1cc000 r8:00000000 r7:ee1cdeb4 r6:ffffffff r5:60070013
> > [  227.891775]  r4:c0389688
> > [  227.894327] [] (nfs_file_clear_open_context) from [] (nfs_file_release+0x54/0x60)
> > [  227.903558]  r7:ee9a78a0 r6:ee68f010 r5:ee9d9f10 r4:ee76edc0
> > [  227.909235] [] (nfs_file_release) from [] (__fput+0x94/0x1e0)
> > [  227.916734] [] (__fput) from [] (____fput+0x10/0x14)
> > [  227.923448]  r10:c10d4298 r9:00000000 r8:00000000 r7:ef2ed780 r6:ef2edc00 r5:c10d5180
> > [  227.931286]  r4:ef2edbd4
> > [  227.933839] [] (____fput) from [] (task_work_run+0xc8/0xec)
> > [  227.941166] [] (task_work_run) from [] (do_work_pending+0x12c/0x1c4)
> > [  227.949271]  r9:ee1cdfb0 r8:00000000 r7:00000000 r6:ee1cc000 r5:00000000 r4:00000000
> > [  227.957029] [] (do_work_pending) from [] (slow_work_pending+0xc/0x20)
> > [  227.965219]  r10:00000000 r9:ee1cc000 r8:c0107e24 r7:0000005b r6:b6f76568 r5:b6f741f0
> > [  227.973058]  r4:b6f76904
> > 
> > Maybe the reason this reproduces easily in this particular setup is
> > that ethernet causes lots of alignment faults?
> Can you try this change?
> 
> diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
> index 3a48b54c6405..bc6ad7789568 100644
> --- a/arch/arm/kernel/signal.c
> +++ b/arch/arm/kernel/signal.c
> @@ -573,12 +573,11 @@ do_work_pending(struct pt_regs *regs, unsigned
> int thread_flags, int syscall)
>   */
>   trace_hardirqs_off();
> 
> - /* Check valid user FS if needed */
> - addr_limit_user_check();
> -
>   do {
>   if (likely(thread_flags & _TIF_NEED_RESCHED)) {
>   schedule();
> + } else if (thread_flags & _TIF_FSCHECK) {
> + addr_limit_user_check();
>   } else {
>   if (unlikely(!user_mode(regs)))
>   return 0;

This does seem to work, it no longer hangs on boot in my setup. This is
obviously only a very superficial test.

The new location of this check seems weird, it's not clear why it
should be on an else path. Perhaps it should be moved to right before
where current_thread_info()->flags is fetched again?

The issue seems like it would affect arm64 as well.

If the purpose is hardening against buggy kernel code doing bad set_fs
calls shouldn't this flag also be checked before looking at
TIF_NEED_RESCHED and calling schedule()?

--
Regards,
Leonard
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux