On 12/22/2015 11:37 AM, Jonathan Cameron wrote:
On 14/12/15 22:35, Andrew F. Davis wrote:
Add driver for the TI AFE4404 heart rate monitor and pulse oximeter.
This device detects reflected LED light fluctuations and presents an ADC
value to the user space for further signal processing.
Datasheet: http://www.ti.com/product/AFE4404/datasheet
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Hi Andrew,
Sorry I didn't get to this a the weekend. We are now likely to just
miss the merge window so lets get this cleaned up and ready to go
for the start of the next cycle (probably 3rd week of January)
No problem, I've been on holiday these last few days anyway.
Looking good mostly. A few minor bits and bobs I either missed before
or that got introduced as side effects of your changes.
I thought about fixing them up and applying, but I think it's just
a shade to many changes and I need your feedback on a couple of them
anyway.
Jonathan
---
.../ABI/testing/sysfs-bus-iio-health-afe4404 | 60 ++
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/health/Kconfig | 25 +
drivers/iio/health/Makefile | 6 +
drivers/iio/health/afe4404.c | 700 +++++++++++++++++++++
drivers/iio/health/afe440x.h | 202 ++++++
7 files changed, 995 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-health-afe4404
create mode 100644 drivers/iio/health/Kconfig
create mode 100644 drivers/iio/health/Makefile
create mode 100644 drivers/iio/health/afe4404.c
create mode 100644 drivers/iio/health/afe440x.h
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe4404 b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4404
new file mode 100644
index 0000000..b01ca47
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe4404
@@ -0,0 +1,60 @@
+What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY
+ /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Get and set the resistance and the capacitance settings for the
+ Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for
+ Rf2 and Cf2 values.
+ Valid Resistance settings are 500000, 250000, 100000, 50000,
+ 25000, 10000, 1000000, and 2000000 Ohms.
+ Valid capacitance settings are 5, 2.5, 10, 7.5, 20, 17.5, 25,
+ and 22.5 picoFarads.
Defined units for IIO are nanofarads - see sysfs-bus-iio.
Would really like to keep this consistent and doesn't look like that should
be terribly hard to do here.
Ah, for some reason I thought pico, will fix.
+
+What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Enable or disable separate settings for the TransImpedance
+ Amplifier above, when disabled both values are set by the
+ first channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw
+ /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Get measured values from the ADC for these stages. Y is the
+ specific LED number. The values are expressed in 24-bit twos
+ complement.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Get differential values from the ADC for these stages. Y is the
+ specific LED number. The values are expressed in 24-bit twos
+ complement for the specified LEDs.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset
+ /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Get and set the offset cancellation DAC setting for these
+ stages. The values are expressed in 5-bit sign–magnitude.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@xxxxxx>
+Description:
+ Get and set the LED current for the specified LED. Y is the
+ specific LED number.
+ Values range from 0 -> 63. Current is calculated by
+ current = value * 0.8mA
Otherwise, we both know that the ABI is less than ideal, but it's probably
the best solution we can easily manage so lets go with this.
While it's not easy to revise this in future it can be done should we
end up with a more generic way of representing the complex cases seen here
(no idea what that might be!)
Sounds good.
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 66792e7..ac085ab 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -52,6 +52,7 @@ source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
+source "drivers/iio/health/Kconfig"
source "drivers/iio/humidity/Kconfig"
source "drivers/iio/imu/Kconfig"
source "drivers/iio/light/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index aeca726..6c5eb2a 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -18,6 +18,7 @@ obj-y += common/
obj-y += dac/
obj-y += gyro/
obj-y += frequency/
+obj-y += health/
obj-y += humidity/
obj-y += imu/
obj-y += light/
diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig
new file mode 100644
index 0000000..526e7af
--- /dev/null
+++ b/drivers/iio/health/Kconfig
@@ -0,0 +1,25 @@
+#
+# Health drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Health"
I'll merge this as appropriate given we now have a health
driver in tree (the simpler maxim one that got going after this one).
ACK
+
+menu "Heart Rate Monitors"
+
+config AFE4404
+ tristate "TI AFE4404 Heart Rate Monitor"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes to choose the Texas Instruments AFE4404
+ heart rate monitor and low-cost pulse oximeter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called afe4404.
+
+endmenu
+
+endmenu
diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile
new file mode 100644
index 0000000..c108c8d
--- /dev/null
+++ b/drivers/iio/health/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for IIO Health drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+obj-$(CONFIG_AFE4404) += afe4404.o
diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c
new file mode 100644
index 0000000..d199a35
--- /dev/null
+++ b/drivers/iio/health/afe4404.c
@@ -0,0 +1,700 @@
[...]
+static irqreturn_t afe440x_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct afe440x_data *afe440x = iio_device_get_drvdata(indio_dev);
+ int ret, bit, i = 0;
+ s32 buffer[12];
7 input channels, align to 64bytes + one timestamp = 10 not 12?
I may well be missing something or losing the ability to count!
Left over from when we had 9 channels, will fix, your counting
abilities are still present :)
[...]
+
+static int afe440x_suspend(struct device *dev)
+{
+ struct afe440x_data *afe440x = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(afe440x->regmap, AFE440X_CONTROL2,
+ AFE440X_CONTROL2_PDN_AFE,
+ AFE440X_CONTROL2_PDN_AFE);
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(afe440x->regulator);
+ if (ret) {
+ dev_err(dev, "Unable to disable regulator\n");
+ return ret;
+ }
Might get a static checker pointing out that a successful regulator_disable
returns 0 anyway so you might as well have a single
return ret; here. I don't care either way other than reducing noise
from those autobuilds.
I didn't get any warnings with mine, so if you don't care either way
I would prefer this way as it feels more consistent to me, we also
can see the successful return value without tracking down what the
last 'ret' assignment considers success.
+
+ return 0;
+}
+
+static int afe440x_resume(struct device *dev)
+{
+ struct afe440x_data *afe440x = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(afe440x->regmap, AFE440X_CONTROL2,
+ AFE440X_CONTROL2_PDN_AFE, 0);
+ if (ret)
+ return ret;
+
+ ret = regulator_enable(afe440x->regulator);
+ if (ret) {
+ dev_err(dev, "Unable to enable regulator\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(afe440x_pm_ops, afe440x_suspend, afe440x_resume);
+
This looks pretty good and clean though not quite traditional from
an IIO driver point of view (separate private data allocation)
I'd personally have had the devm_iio_device_alloc in the main probe
function then populated it in this function. However,
I can happily live with this slight varient as it is easy enough
to follow with your nice const info structure approach.
The rational for this should be more clear when I break off
all the common code that this allows us.
+static int afe440x_iio_setup(struct afe440x_data *afe440x,
+ const struct afe440x_info *afe440x_info)
+{
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(afe440x->dev, 0);
+ if (!indio_dev) {
+ dev_err(afe440x->dev, "Unable to allocate IIO device\n");
+ return -ENOMEM;
+ }
+
+ iio_device_set_drvdata(indio_dev, afe440x);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->dev.parent = afe440x->dev;
+ indio_dev->channels = afe440x_info->channels;
+ indio_dev->num_channels = afe440x_info->num_channels;
+ indio_dev->name = afe440x_info->name;
+ indio_dev->info = afe440x_info->info;
+
+ if (afe440x->irq > 0) {
+ afe440x->trig = devm_iio_trigger_alloc(afe440x->dev,
+ "%s-dev%d",
+ indio_dev->name,
+ indio_dev->id);
+ if (!afe440x->trig) {
+ dev_err(afe440x->dev, "Unable to allocate IIO trigger\n");
+ return -ENOMEM;
+ }
+
+ iio_trigger_set_drvdata(afe440x->trig, indio_dev);
+
+ afe440x->trig->ops = &afe440x_trigger_ops;
+ afe440x->trig->dev.parent = afe440x->dev;
+
+ ret = iio_trigger_register(afe440x->trig);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to register IIO trigger\n");
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(afe440x->dev, afe440x->irq,
+ iio_trigger_generic_data_rdy_poll,
+ NULL, IRQF_ONESHOT,
+ afe440x_info->name,
+ afe440x->trig);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to request IRQ\n");
+ return ret;
+ }
+ }
+
+ ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &afe440x_trigger_handler, NULL);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to setup buffer\n");
+ return ret;
+ }
+
+ ret = devm_iio_device_register(afe440x->dev, indio_dev);
Ah. It took a lot of persuading to get me to allow the devm version
of this function in the first place. It is only appropriate for
very simple devices where there is nothing to turn off. The issue
is that it creates a race condition in the remove function (see below).
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to register IIO device\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct afe440x_info afe4404_info = {
+ .name = AFE4404_DRIVER_NAME,
+ .channels = afe4404_channels,
+ .num_channels = ARRAY_SIZE(afe4404_channels),
+ .info = &afe440x_iio_info,
+};
+
+static int afe4404_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct afe440x_data *afe440x;
+ int ret;
+
+ afe440x = devm_kzalloc(&client->dev, sizeof(*afe440x), GFP_KERNEL);
+ if (!afe440x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, afe440x);
+
+ afe440x->dev = &client->dev;
+ afe440x->irq = client->irq;
+
+ afe440x->regmap = devm_regmap_init_i2c(client, &afe4404_regmap_config);
+ if (IS_ERR(afe440x->regmap)) {
+ dev_err(afe440x->dev, "Unable to allocate register map\n");
+ return PTR_ERR(afe440x->regmap);
+ }
+
+ afe440x->regulator = devm_regulator_get(afe440x->dev, "tx_sup");
+ if (IS_ERR(afe440x->regulator)) {
+ dev_err(afe440x->dev, "Unable to get regulator\n");
+ return PTR_ERR(afe440x->regulator);
+ }
+ ret = regulator_enable(afe440x->regulator);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to enable regulator\n");
+ return ret;
+ }
+
+ ret = regmap_write(afe440x->regmap, AFE440X_CONTROL0,
+ AFE440X_CONTROL0_SW_RESET);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to reset device\n");
+ return ret;
+ }
+
+ ret = regmap_register_patch(afe440x->regmap, afe4404_reg_sequences,
+ ARRAY_SIZE(afe4404_reg_sequences));
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to set register defaults\n");
+ return ret;
+ }
+
+ return afe440x_iio_setup(afe440x, &afe4404_info);
+}
+
+static int afe4404_remove(struct i2c_client *client)
+{
+ struct afe440x_data *afe440x = i2c_get_clientdata(client);
+ int ret;
+
+ ret = regulator_disable(afe440x->regulator);
+ if (ret) {
+ dev_err(afe440x->dev, "Unable to disable regulator\n");
+ return ret;
+ }
As the iio_device_unregister does not occur until after this function the
result is that we turn this regulator off whilst the userspace / kernelspace
interfaces to the device are still active. Hence you can get a read in
the meantime and a rather unpredictable result.
The sad result of this is you need to not use the devm_ version of
iio_device_register but instead the unmanaged one and remove it by
hand at the start of the remove function. Now if there was a managed
regulator enable then you could do it all with managed interfaces
and not have a remove function at all, but there are probably good
reasons why that doesn't exist.
Possibly similar reason to this, will fix.
+
+ return 0;
+}
+
+static const struct i2c_device_id afe4404_ids[] = {
+ { "afe4404", 0 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i2c, afe4404_ids);
+
+static struct i2c_driver afe4404_i2c_driver = {
+ .driver = {
+ .name = AFE4404_DRIVER_NAME,
+ .of_match_table = of_match_ptr(afe4404_of_match),
+ .pm = &afe440x_pm_ops,
+ },
+ .probe = afe4404_probe,
+ .remove = afe4404_remove,
+ .id_table = afe4404_ids,
+};
+module_i2c_driver(afe4404_i2c_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@xxxxxx>");
+MODULE_DESCRIPTION("TI AFE4404 Heart Rate and Pulse Oximeter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h
new file mode 100644
index 0000000..575e528
--- /dev/null
+++ b/drivers/iio/health/afe440x.h
@@ -0,0 +1,202 @@
+/*
+ * AFE440X Heart Rate Monitors and Low-Cost Pulse Oximeters
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _AFE440X_H
+#define _AFE440X_H
+
+/* AFE440X registers */
+#define AFE440X_CONTROL0 0x00
+#define AFE440X_LED2STC 0x01
+#define AFE440X_LED2ENDC 0x02
+#define AFE440X_LED1LEDSTC 0x03
+#define AFE440X_LED1LEDENDC 0x04
+#define AFE440X_ALED2STC 0x05
+#define AFE440X_ALED2ENDC 0x06
+#define AFE440X_LED1STC 0x07
+#define AFE440X_LED1ENDC 0x08
+#define AFE440X_LED2LEDSTC 0x09
+#define AFE440X_LED2LEDENDC 0x0a
+#define AFE440X_ALED1STC 0x0b
+#define AFE440X_ALED1ENDC 0x0c
+#define AFE440X_LED2CONVST 0x0d
+#define AFE440X_LED2CONVEND 0x0e
+#define AFE440X_ALED2CONVST 0x0f
+#define AFE440X_ALED2CONVEND 0x10
+#define AFE440X_LED1CONVST 0x11
+#define AFE440X_LED1CONVEND 0x12
+#define AFE440X_ALED1CONVST 0x13
+#define AFE440X_ALED1CONVEND 0x14
+#define AFE440X_ADCRSTSTCT0 0x15
+#define AFE440X_ADCRSTENDCT0 0x16
+#define AFE440X_ADCRSTSTCT1 0x17
+#define AFE440X_ADCRSTENDCT1 0x18
+#define AFE440X_ADCRSTSTCT2 0x19
+#define AFE440X_ADCRSTENDCT2 0x1a
+#define AFE440X_ADCRSTSTCT3 0x1b
+#define AFE440X_ADCRSTENDCT3 0x1c
+#define AFE440X_PRPCOUNT 0x1d
+#define AFE440X_CONTROL1 0x1e
+#define AFE440X_TIAGAIN 0x20
Just a small point, but you have some of these redefined
in the afe4403 drivers additional header.
Now the contents is different but the register numbering
matches. I'd be tempted to make the difference more
obvious by renaming the AFE4404 versions without the X where
their contents is considerably different (even if they have the
same address..
I'd also push them down into the C file so only shared elements
across the two drivers are defined here.
Just makes the scope of the definitions more obvious.
This was my original intent, but it looks like some have
gotten away from me, I'll see what I can do to clean this
up.
Thanks,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
