Re: [PATCH 4/5] doc: ABI: bone_capemgr sysfs API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

> On May 13, 2015, at 14:52 , Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> 
> On Wed, May 13, 2015 at 10:59:44AM +0300, Pantelis Antoniou wrote:
>> Document the beaglebone's capemgr sysfs API
>> 
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
>> ---
>> .../testing/sysfs-devices-platform-bone_capemgr    | 63 ++++++++++++++++++++++
>> 1 file changed, 63 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr
>> 
>> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr
>> new file mode 100644
>> index 0000000..e2df613
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr
>> @@ -0,0 +1,63 @@
>> +What:		/sys/devices/platform/bone_capemgr/slots
>> +Date:		May 2015
>> +KernelVersion:	4.0
> 
> I don't think that version is correct :)
> 

Bah, ++

>> +Contact:	Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
>> +Description:
>> +		READ:
>> +		  Describe the state of all the slots of the beaglebone capemgr.
>> +		  Each line of the output describes a slot:
> 
> sysfs files are "one value per file", so a sysfs file that displays
> multiple lines like this is not allowed at all, sorry.
> 
> Please either make it a debugfs file (if this is only for debugging, or
> split it out into individual files, one per slot (hint, one per slot is
> probably best.)
> 

Well, it’s a status file. And it’s been used as is for a couple of years
so it was worth a shot for backward compatibility.


>> +		  The slot format is as following:
>> +		  <slot-id>: [P-][F-][O-][l-][L-][D-] \
>> +			  <overlay-id> <board-name>,<version>,
>> +			  <manufacturer>,<part-number>
>> +
>> +		Where the flags are:
>> +		P: Slot has been probed
>> +		F: Slot has failed probing (i.e. no EEPROM detected)
>> +		O: Slot has been overridden by the user
>> +		l: Slot is current loading
>> +		L: Slot has completed loading and is ready
>> +		D: Slot has been disabled
>> +
>> +		Example:
>> +		0: P---L-  -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03
>> +		1: PF----  -1
>> +		2: PF----  -1
>> +		3: PF----  -1
>> +
>> +		WRITE:
>> +		  Writing a string of the form <part-number>[:version] issues a request to
>> +		  load a firmware blob containing an overlay. The name of the firmware blob
>> +		  is <part-number>-[version|00A0].dtbo. This act is defined as a slot override.
>> +
>> +		  Writing a negative slot id removes the slot if it was an overridden one, or
>> +		  unloads a slot that was probed.
>> +
>> +What:		/sys/devices/platform/bone_capemgr/baseboard/<eeprom-field>
>> +Date:		May 2015
>> +KernelVersion:	4.0
>> +Contact:	Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
>> +Description:	Contains the probed base board EEPROM field; one of:
>> +		board-name		- board-name as stored in cape EEPROM
>> +		dc-supplied		- whether the cape draws or supplies DC
>> +		eeprom-format-revision	- EEPROM format rev, only 00A0 supported
>> +		header			- header; should be 'aa 55 33 ee'
> 
> If it's always this value, why have the file?
> 

These are the contents of the EEPROM. If the format of the EEPROM changes then the
header information will change.

>> +		manufacturer		- manufacturer string
>> +		part-number		- part-number of the cape
>> +		serial-number		- serial number of the cape
>> +		version			- version of the cape, i.e. 00A0
>> +		number-of-pins		- displayed but ignored
>> +		pin-usage		- displayed but ignored
>> +		sys-5v			- displayed but ignored
>> +		vdd-3v3exp		- displayed but ignored
>> +		vdd-5v			- displayed but ignored
> 
> Are these all individual different files?
> 

Yes

>> +What:		/sys/devices/platform/bone_capemgr/slot-<n>/<eeprom-field>
> 
> No blank line?
> 

OK

>> +Date:		May 2015
>> +KernelVersion:	4.0
>> +Contact:	Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
>> +Description:	Contains the probed cape's EEPROM field; the field is one of:
>> +		board-name		- baseboard name i.e. A335BNLT
>> +		header			- header; should be 'aa 55 33 ee'
>> +		revision		- baseboard revision
>> +		serial-number		- baseboard serial number
>> +		config-option		- displayed but ignored
> 
> Same here, are these all individual files?
> 

Yes.

> thanks,
> 
> greg k-h

Regards

— Pantelis

--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux