Re: [RFC PATCH 1/3] eeprom: Add a simple EEPROM framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Andrew for your comments,

On 19/02/15 18:12, Andrew Lunn wrote:
+
+Required properties:
+
+eeproms: List of phandle and data cell specifier triplet, one triplet
+	 for each data cell the device might be interested in. The
+	 triplet consists of the phandle to the eeprom provider, then
+	 the offset in byte within that storage device, and the length

bytes

+	 in byte of the data we care about.

bytes
Yep will fix it in next version.

+
+Optional properties:
+
+eeprom-names: List of data cell name strings sorted in the same order
+ 	      as the resets property. Consumers drivers will use

resets? I guess this text was cut/paste from the reset documentation?\

I think so. Will fix it.
+ 	      eeprom-names to differentiate between multiple cells,
+ 	      and hence being able to know what these cells are for.
+
+For example:
+
+	device {
+		eeproms = <&at24 14 42>;

I like to use 42, but is it realistic to have a soc-rev-id which is 42
bytes long?  How about using 42 as the offset and a sensible length of
say 4?
Ok, will fix it..

+		eeprom-names = "soc-rev-id";
+menuconfig EEPROM
+	bool "EEPROM Support"
+	depends on OF
+	help
+	  Support for EEPROM alike devices.

like.
Ok

+
+	  This framework is designed to provide a generic interface to EEPROM

EPROMs
Ok.

+
+
+static ssize_t bin_attr_eeprom_read_write(struct kobject *kobj,
+				    char *buf, loff_t offset,
+				    size_t count, bool read)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct eeprom_device *eeprom = container_of(dev, struct eeprom_device,
+						    edev);
+	int rc;
+
+	if (offset > eeprom->size)
+		return 0;
+
+	if (offset + count > eeprom->size)
+		count = eeprom->size - offset;
+
+	if (read)
+		rc = regmap_bulk_read(eeprom->regmap, offset,
+				      buf, count/eeprom->stride);

This division will round down, so you could get one less byte than
what you expected, and the value you actually return. It seems like
there should be a check here, the count is a multiple of stride and
return an error if it is not.
Thats a good catch, I will fix this for other such instances too.

+	else
+		rc = regmap_bulk_write(eeprom->regmap, offset,
+				       buf, count/eeprom->stride);
+
+	if (IS_ERR_VALUE(rc))
+		return 0;
+

I don't think returning 0 here, and above is the best thing to
do. Return the real error code from regmap, or EINVAL or some other
error code for going off the end of the eerpom.
Ok, I will fix the return value here for both the cases.


+	return count;
+}
+
+static ssize_t bin_attr_eeprom_read(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *attr,
+				    char *buf, loff_t offset, size_t count)
+{
+	return bin_attr_eeprom_read_write(kobj, buf, offset, count, true);
+}
+
+static ssize_t bin_attr_eeprom_write(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *attr,
+				     char *buf, loff_t offset, size_t count)
+{
+	return bin_attr_eeprom_read_write(kobj, buf, offset, count, false);
+}


These two functions seem to be identical. So just have one of them?

One is read and other is write.. there is a true and false flag at the end of the call to bin_attr_eeprom_read_write().

+
+static struct bin_attribute bin_attr_eeprom = {
+	.attr	= {
+		.name	= "eeprom",
+		.mode	= 0660,

Symbolic values like S_IRUGO | S_IWUSR would be better.
Yep, thats correct, I will fix it.

Are you also sure you want group write?

S_IWUSR should be enough.

+	},
+	.read	= bin_attr_eeprom_read,
+	.write	= bin_attr_eeprom_write,
+};
+
+static struct eeprom_cell *__eeprom_cell_get(struct device_node *node,
+					     int index)
+{
+	struct of_phandle_args args;
+	struct eeprom_cell *cell;
+	struct eeprom_device *e, *eeprom = NULL;
+	int ret;
+
+	ret = of_parse_phandle_with_args(node, "eeproms",
+					 "#eeprom-cells", index, &args);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (args.args_count != 2)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&eeprom_list_mutex);
+
+	list_for_each_entry(e, &eeprom_list, list) {
+		if (args.np == e->edev.of_node) {
+			eeprom = e;
+			break;
+		}
+	}
+	mutex_unlock(&eeprom_list_mutex);

Shouldn't you increment a reference count to the eeprom here?  You are
going to have trouble if the eeprom is unregistered and there is a
call still referring to it.
Yes, Stephen Byod also pointed the same, having owner in eeprom_device should fix this.
I will fix it in next version.


+
+	if (!eeprom)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	cell = kzalloc(sizeof(*cell), GFP_KERNEL);
+	if (!cell)
+		return ERR_PTR(-ENOMEM);
+
+	cell->eeprom = eeprom;
+	cell->offset = args.args[0];
+	cell->count = args.args[1];
+
+	return cell;
+}
+
+
diff --git a/include/linux/eeprom-consumer.h b/include/linux/eeprom-consumer.h
new file mode 100644
index 0000000..706ae9d
--- /dev/null
+++ b/include/linux/eeprom-consumer.h
@@ -0,0 +1,73 @@
+/*
+ * EEPROM framework consumer.
+ *
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+ * Copyright (C) 2013 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _LINUX_EEPROM_CONSUMER_H
+#define _LINUX_EEPROM_CONSUMER_H
+
+struct eeprom_cell;
+
+/**
+ * eeprom_cell_get(): Get eeprom cell of device form a given index.

of a device for a

Ok, will be fixed in next version.
+ *
+ * @dev: Device that will be interacted with
+ * @index: Index of the eeprom cell.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct eeprom_cell.  The eeprom_cell will be freed by the
+ * eeprom_cell_put().
+ */
+struct eeprom_cell *eeprom_cell_get(struct device *dev, int index);
+
+/**
+ * eeprom_cell_get(): Get eeprom cell of device form a given name.

same again
Ok, will be fixed in next version.

+ *
+ * @dev: Device that will be interacted with
+ * @name: Name of the eeprom cell.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct eeprom_cell.  The eeprom_cell will be freed by the
+ * eeprom_cell_put().
+ */
+struct eeprom_cell *eeprom_cell_get_byname(struct device *dev,
+					   const char *name);
+
+/**
+ * eeprom_cell_put(): Release previously allocated eeprom cell.
+ *
+ * @cell: Previously allocated eeprom cell by eeprom_cell_get()
+ * or eeprom_cell_get_byname().
+ */
+void eeprom_cell_put(struct eeprom_cell *cell);
+
+/**
+ * eeprom_cell_read(): Read a given eeprom cell
+ *
+ * @cell: eeprom cell to be read.
+ * @len: pointer to length of cell which will be populated on successful read.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a char * bufffer.  The buffer should be freed by the consumer with a
+ * kfree().
+ */
+char *eeprom_cell_read(struct eeprom_cell *cell, ssize_t *len);

Would void * be better than char *? I guess the contents is mostly
data, not strings.
Yes, thats sounds sensible.

       Andrew

+
+/**


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux