On Mon, Feb 09, 2015 at 12:08:46AM +0100, Peter Hüwe wrote:
> Am Mittwoch, 4. Februar 2015, 15:21:09 schrieb Jarkko Sakkinen:
> > If during transmission system error was returned, the logic was to
> > incorrectly deduce that chip is a TPM 1.x chip. This patch fixes this
> > issue. Also, this patch changes probing so that message tag is used as the
> > measure for TPM 2.x, which should be much more stable.
> Is it aware that some TPMs may respond with 0x00C1 as TAG for TPM1.2 commands?
I guess none of the TPM 1.2 command answer with the tag 0x8002?
> > A separate function
> > called tpm2_probe() is encapsulated because it can be used with any
> > chipset.
>
> >
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
> > ---
> > drivers/char/tpm/tpm.h | 3 ++-
> > drivers/char/tpm/tpm2-cmd.c | 40 +++++++++++++++++++++++++++++++++-------
> > drivers/char/tpm/tpm_tis.c | 11 ++++-------
> > 3 files changed, 39 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> > index 7b0727c..a4b0f5e 100644
> > --- a/drivers/char/tpm/tpm.h
> > +++ b/drivers/char/tpm/tpm.h
> > @@ -435,4 +435,5 @@ extern int tpm2_startup(struct tpm_chip *chip, u16
> > startup_type); extern int tpm2_shutdown(struct tpm_chip *chip, u16
> > shutdown_type); extern unsigned long tpm2_calc_ordinal_duration(struct
> > tpm_chip *, u32); extern int tpm2_do_selftest(struct tpm_chip *chip);
> > -extern int tpm2_gen_interrupt(struct tpm_chip *chip, bool quiet);
> > +extern int tpm2_gen_interrupt(struct tpm_chip *chip);
> > +extern int tpm2_probe(struct tpm_chip *chip);
> > diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> > index 1abe650..49cd354 100644
> > --- a/drivers/char/tpm/tpm2-cmd.c
> > +++ b/drivers/char/tpm/tpm2-cmd.c
> > @@ -598,20 +598,46 @@ EXPORT_SYMBOL_GPL(tpm2_do_selftest);
> > /**
> > * tpm2_gen_interrupt() - generate an interrupt
> > * @chip: TPM chip to use
> > - * @quiet: surpress the error message
> > *
> > * 0 is returned when the operation is successful. If a negative number is
> > * returned it remarks a POSIX error code. If a positive number is
> > returned * it remarks a TPM error.
> > */
> > -int tpm2_gen_interrupt(struct tpm_chip *chip, bool quiet)
> > +int tpm2_gen_interrupt(struct tpm_chip *chip)
> > {
> > - const char *desc = NULL;
> > u32 dummy;
> >
> > - if (!quiet)
> > - desc = "attempting to generate an interrupt";
> > -
> > - return tpm2_get_tpm_pt(chip, TPM2_CAP_TPM_PROPERTIES, &dummy, desc);
> > + return tpm2_get_tpm_pt(chip, 0x100, &dummy,
> > + "attempting to generate an interrupt");
> Why the change from TPM2_CAP_TPM_PROPERTIES = 6 to 0x100 and what does 0x100
> stand for?
In TPM 2.0 there are two levels: capabilities and properties. Using
capability ID of "TPM properties" property set was a sloppy mistake
although it didn't matter because interrupt is still generate.
The properties in the "TPM properties" property set start with the
index 0x100.
> > }
> > EXPORT_SYMBOL_GPL(tpm2_gen_interrupt);
> > +
> > +/**
> > + * tpm2_probe() - probe TPM 2.0
> > + * @chip: TPM chip to use
> > + *
> > + * Send idempotent TPM 2.0 command and see whether TPM 2.0 chip replied
> > based on + * the reply tag.
> > + */
> > +int tpm2_probe(struct tpm_chip *chip)
> > +{
> > + struct tpm2_cmd cmd;
> > + int rc;
> > +
> > + cmd.header.in = tpm2_get_tpm_pt_header;
> > + cmd.params.get_tpm_pt_in.cap_id = cpu_to_be32(TPM2_CAP_TPM_PROPERTIES);
> > + cmd.params.get_tpm_pt_in.property_id = cpu_to_be32(0x100);
> > + cmd.params.get_tpm_pt_in.property_cnt = cpu_to_be32(1);
> > +
> > + rc = tpm_transmit(chip, (const char *) &cmd, sizeof(cmd));
> > + if (rc < 0)
> > + return rc;
> > + else if (rc < TPM_HEADER_SIZE)
> > + return -EFAULT;
> > +
> > + if (be16_to_cpu(cmd.header.out.tag) == TPM2_ST_NO_SESSIONS)
> > + chip->flags |= TPM_CHIP_FLAG_TPM2;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(tpm2_probe);
> > diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> > index 6725bef..ee6e0bd 100644
> > --- a/drivers/char/tpm/tpm_tis.c
> > +++ b/drivers/char/tpm/tpm_tis.c
> > @@ -639,12 +639,9 @@ static int tpm_tis_init(struct device *dev,
> > acpi_handle acpi_dev_handle, goto out_err;
> > }
> >
> > - /* Every TPM 2.x command has a higher ordinal than TPM 1.x commands.
> > - * Therefore, we can use an idempotent TPM 2.x command to probe TPM 2.x.
> > - */
> > - rc = tpm2_gen_interrupt(chip, true);
> > - if (rc == 0 || rc == TPM2_RC_INITIALIZE)
> > - chip->flags |= TPM_CHIP_FLAG_TPM2;
> > + rc = tpm2_probe(chip);
> > + if (rc)
> > + goto out_err;
> >
> > vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
> > chip->vendor.manufacturer_id = vendor;
> > @@ -747,7 +744,7 @@ static int tpm_tis_init(struct device *dev, acpi_handle
> > acpi_dev_handle,
> >
> > /* Generate Interrupts */
> > if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > - tpm2_gen_interrupt(chip, false);
> > + tpm2_gen_interrupt(chip);
> > else
> > tpm_gen_interrupt(chip);
/Jarkko
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
