Re: [PATCH v6 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 23, 2015 at 9:12 PM, Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> wrote:
> On 01/23/2015 02:23 AM, Lyra Zhang wrote:
>> Hi, Peter
>>
>> Many thanks to you for reviewing so carefully and giving us so many
>> suggestions and so clear explanations.
>
> :)
>
>> I'll address all of your comments and send an updated patch soon.
>>
>> On Fri, Jan 23, 2015 at 11:57 AM, Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> wrote:
>
> [...]
>
>>>> +static void sprd_set_termios(struct uart_port *port,
>>>> +                                 struct ktermios *termios,
>>>> +                                 struct ktermios *old)
>>>> +{
>>>> +     unsigned int baud, quot;
>>>> +     unsigned int lcr, fc;
>>>> +     unsigned long flags;
>>>> +
>>>> +     /* ask the core to calculate the divisor for us */
>>>> +     baud = uart_get_baud_rate(port, termios, old, 1200, 3000000);
>>>                                                       ^^^^   ^^^^^^
>>>                                            mabye derive these from uartclk?
>>
>> I'm afraid I can't understand very clearly, Could you explain more
>> details please?
>
> Is the fixed clock divider == 8 and the uartclk == 26000000 ?
> If so,
>         baud = uartclk / 8 = 3250000
>
> I see now this is clamping baud inside the maximum, so this is fine.
> Please disregard my comment.
>
> [...]
>
>
>>>> +static int sprd_probe(struct platform_device *pdev)
>>>> +{
>>>> +     struct resource *res;
>>>> +     struct uart_port *up;
>>>> +     struct clk *clk;
>>>> +     int irq;
>>>> +     int index;
>>>> +     int ret;
>>>> +
>>>> +     for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>>>> +             if (sprd_port[index] == NULL)
>>>> +                     break;
>>>> +
>>>> +     if (index == ARRAY_SIZE(sprd_port))
>>>> +             return -EBUSY;
>>>> +
>>>> +     index = sprd_probe_dt_alias(index, &pdev->dev);
>>>> +
>>>> +     sprd_port[index] = devm_kzalloc(&pdev->dev,
>>>> +             sizeof(*sprd_port[index]), GFP_KERNEL);
>>>> +     if (!sprd_port[index])
>>>> +             return -ENOMEM;
>>>> +
>>>> +     up = &sprd_port[index]->port;
>>>> +     up->dev = &pdev->dev;
>>>> +     up->line = index;
>>>> +     up->type = PORT_SPRD;
>>>> +     up->iotype = SERIAL_IO_PORT;
>>>> +     up->uartclk = SPRD_DEF_RATE;
>>>> +     up->fifosize = SPRD_FIFO_SIZE;
>>>> +     up->ops = &serial_sprd_ops;
>>>> +     up->flags = ASYNC_BOOT_AUTOCONF;
>>>                     ^^^^^^^^^
>>>                     UPF_BOOT_AUTOCONF
>>>
>>> sparse will catch errors like this. See Documentation/sparse.txt
>>
>> you mean we should use UPF_BOOT_AUTOCONF, right?
>
> Yes. Only UPF_* flag definitions should be used with the uart_port.flags
> field.
>
> My comment regarding the sparse tool and documentation is because the
> flags field and UPF_* definitions use a type mechanism to generate
> warnings using the sparse tool if regular integer values are used
> with the flags field.
>
> The type mechanism was specifically introduced to catch using ASYNC_*
> definitions with the uart_port.flags field.
>
> [...]
>
>>>> +static int sprd_suspend(struct device *dev)
>>>> +{
>>>> +     int id = to_platform_device(dev)->id;
>>>> +     struct uart_port *port = &sprd_port[id]->port;
>>>
>>> I'm a little confused regarding the port indexing;
>>> is platform_device->id == line ?  Where did that happen?
>>>
>>
>> Oh, I'll change to assign platform_device->id with port->line in probe()
>
> I apologize; I should have made my comment clearer.
>
> The ->id should not be assigned.
>
> Replace
>
>         int id = to_platform_device(dev)->id;
>         struct uart_port *port = &sprd_port[id]->port;
>
>         uart_suspend_port(&sprd_uart_driver, port);
>
> with
>
>         struct sprd_uart_port *sup = dev_get_drvdata(dev);
>
>         uart_suspend_port(&sprd_uart_driver, &sup->port);
>
>
> I know it's not obvious but platform_get/set_drvdata() is really
> dev_get/set_drvdata() using the embedded struct device dev.
>

I've just sent the v7 before I saw your this email, but I'll address
this point in the next version.

Thanks a lot,
Chunyan

>>
>>>
>>>> +
>>>> +     uart_suspend_port(&sprd_uart_driver, port);
>>>> +
>>>> +     return 0;
>>>> +}
>>>> +
>>>> +static int sprd_resume(struct device *dev)
>>>> +{
>>>> +     int id = to_platform_device(dev)->id;
>>>> +     struct uart_port *port = &sprd_port[id]->port;
>>>> +
>>>> +     uart_resume_port(&sprd_uart_driver, port);
>
> same here
>
>>>> +     return 0;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux