From: Benoit Parrot <bparrot@xxxxxx> This patch adds Video Processing Front End (VPFE) driver for AM437X family of devices Driver supports the following: - V4L2 API using MMAP buffer access based on videobuf2 api - Asynchronous sensor/decoder sub device registration - DT support Signed-off-by: Benoit Parrot <bparrot@xxxxxx> Signed-off-by: Darren Etheridge <detheridge@xxxxxx> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> --- Changes for v6: 1: Fixed review comments pointed Hans, fixing race condition. v5: https://patchwork.kernel.org/patch/5459311/ v4: https://patchwork.kernel.org/patch/5449211/ v3: https://patchwork.kernel.org/patch/5434291/ v2: https://patchwork.kernel.org/patch/5425631/ v1: https://patchwork.kernel.org/patch/5362661/ .../devicetree/bindings/media/ti-am437x-vpfe.txt | 61 + MAINTAINERS | 9 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 2 + drivers/media/platform/am437x/Kconfig | 11 + drivers/media/platform/am437x/Makefile | 3 + drivers/media/platform/am437x/am437x-vpfe.c | 2777 ++++++++++++++++++++ drivers/media/platform/am437x/am437x-vpfe.h | 283 ++ drivers/media/platform/am437x/am437x-vpfe_regs.h | 140 + include/uapi/linux/Kbuild | 1 + include/uapi/linux/am437x-vpfe.h | 122 + 11 files changed, 3410 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt create mode 100644 drivers/media/platform/am437x/Kconfig create mode 100644 drivers/media/platform/am437x/Makefile create mode 100644 drivers/media/platform/am437x/am437x-vpfe.c create mode 100644 drivers/media/platform/am437x/am437x-vpfe.h create mode 100644 drivers/media/platform/am437x/am437x-vpfe_regs.h create mode 100644 include/uapi/linux/am437x-vpfe.h diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt new file mode 100644 index 0000000..3932e76 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt @@ -0,0 +1,61 @@ +Texas Instruments AM437x CAMERA (VPFE) +-------------------------------------- + +The Video Processing Front End (VPFE) is a key component for image capture +applications. The capture module provides the system interface and the +processing capability to connect RAW image-sensor modules and video decoders +to the AM437x device. + +Required properties: +- compatible: must be "ti,am437x-vpfe" +- reg: physical base address and length of the registers set for the device; +- interrupts: should contain IRQ line for the VPFE; +- ti,am437x-vpfe-interface: can be one of the following, + 0 - Raw Bayer Interface. + 1 - 8 Bit BT656 Interface. + 2 - 10 Bit BT656 Interface. + 3 - YCbCr 8 Bit Interface. + 4 - YCbCr 16 Bit Interface. + +VPFE supports a single port node with parallel bus. It should contain one +'port' child node with child 'endpoint' node. Please refer to the bindings +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + vpfe: vpfe@f0034000 { + compatible = "ti,am437x-vpfe"; + reg = <0x48328000 0x2000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe_pins_default>; + pinctrl-1 = <&vpfe_pins_sleep>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vpfe0_ep: endpoint { + remote-endpoint = <&ov2659_1>; + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + + i2c1: i2c@4802a000 { + + ov2659@30 { + compatible = "ti,ov2659"; + reg = <0x30>; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + bus-width = <8>; + mclk-frequency = <12000000>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 9c49eb6..5b1cb1a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8543,6 +8543,15 @@ S: Maintained F: drivers/media/platform/davinci/ F: include/media/davinci/ +TI AM437X VPFE DRIVER +M: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> +L: linux-media@xxxxxxxxxxxxxxx +W: http://linuxtv.org/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git +S: Maintained +F: drivers/media/platform/am437x/ + SIS 190 ETHERNET DRIVER M: Francois Romieu <romieu@xxxxxxxxxxxxx> L: netdev@xxxxxxxxxxxxxxx diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 0c61155..6d94045 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -126,6 +126,7 @@ config VIDEO_S3C_CAMIF source "drivers/media/platform/soc_camera/Kconfig" source "drivers/media/platform/exynos4-is/Kconfig" source "drivers/media/platform/s5p-tv/Kconfig" +source "drivers/media/platform/am437x/Kconfig" endif # V4L_PLATFORM_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index b818afb..7bb6d46 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -49,4 +49,6 @@ obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/ obj-y += omap/ +obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/ + ccflags-y += -I$(srctree)/drivers/media/i2c diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig new file mode 100644 index 0000000..7b023a76 --- /dev/null +++ b/drivers/media/platform/am437x/Kconfig @@ -0,0 +1,11 @@ +config VIDEO_AM437X_VPFE + tristate "TI AM437x VPFE video capture driver" + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on SOC_AM43XX || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + help + Support for AM437x Video Processing Front End based Video + Capture Driver. + + To compile this driver as a module, choose M here. The module + will be called am437x-vpfe. diff --git a/drivers/media/platform/am437x/Makefile b/drivers/media/platform/am437x/Makefile new file mode 100644 index 0000000..d11fff1 --- /dev/null +++ b/drivers/media/platform/am437x/Makefile @@ -0,0 +1,3 @@ +# Makefile for AM437x VPFE driver + +obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x-vpfe.o diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c new file mode 100644 index 0000000..eb6b35e --- /dev/null +++ b/drivers/media/platform/am437x/am437x-vpfe.c @@ -0,0 +1,2777 @@ +/* + * TI VPFE capture Driver + * + * Copyright (C) 2013 - 2014 Texas Instruments, Inc. + * + * Benoit Parrot <bparrot@xxxxxx> + * Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <media/v4l2-of.h> + +#include "am437x-vpfe.h" + +#define VPFE_MODULE_NAME "vpfe" +#define VPFE_VERSION "0.1.0" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-8"); + +#define vpfe_dbg(level, dev, fmt, arg...) \ + v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ##arg) +#define vpfe_info(dev, fmt, arg...) \ + v4l2_info(&dev->v4l2_dev, fmt, ##arg) +#define vpfe_err(dev, fmt, arg...) \ + v4l2_err(&dev->v4l2_dev, fmt, ##arg) + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + int frame_format; +}; + +const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +struct bus_format { + unsigned int width; + unsigned int bpp; +}; + +/* + * struct vpfe_fmt - VPFE media bus format information + * @name: V4L2 format description + * @code: V4L2 media bus format code + * @shifted: V4L2 media bus format code for the same pixel layout but + * shifted to be 8 bits per pixel. =0 if format is not shiftable. + * @pixelformat: V4L2 pixel format FCC identifier + * @width: Bits per pixel (when transferred over a bus) + * @bpp: Bytes per pixel (when stored in memory) + * @supported: Indicates format supported by subdev + */ +struct vpfe_fmt { + const char *name; + u32 fourcc; + u32 code; + struct bus_format l; + struct bus_format s; + bool supported; + u32 index; +}; + +static struct vpfe_fmt formats[] = { + { + .name = "YUV 4:2:2 packed, YCbYCr", + .fourcc = V4L2_PIX_FMT_YUYV, + .code = MEDIA_BUS_FMT_YUYV8_2X8, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, { + .name = "YUV 4:2:2 packed, CbYCrY", + .fourcc = V4L2_PIX_FMT_UYVY, + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, { + .name = "YUV 4:2:2 packed, YCrYCb", + .fourcc = V4L2_PIX_FMT_YVYU, + .code = MEDIA_BUS_FMT_YVYU8_2X8, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, { + .name = "YUV 4:2:2 packed, CrYCbY", + .fourcc = V4L2_PIX_FMT_VYUY, + .code = MEDIA_BUS_FMT_VYUY8_2X8, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, { + .name = "RAW8 BGGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .l.width = 10, + .l.bpp = 2, + .s.width = 8, + .s.bpp = 1, + .supported = false, + }, { + .name = "RAW8 GBRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .l.width = 10, + .l.bpp = 2, + .s.width = 8, + .s.bpp = 1, + .supported = false, + }, { + .name = "RAW8 GRBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .l.width = 10, + .l.bpp = 2, + .s.width = 8, + .s.bpp = 1, + .supported = false, + }, { + .name = "RAW8 RGGB", + .fourcc = V4L2_PIX_FMT_SRGGB8, + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .l.width = 10, + .l.bpp = 2, + .s.width = 8, + .s.bpp = 1, + .supported = false, + }, { + .name = "RGB565 (LE)", + .fourcc = V4L2_PIX_FMT_RGB565, + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, { + .name = "RGB565 (BE)", + .fourcc = V4L2_PIX_FMT_RGB565X, + .code = MEDIA_BUS_FMT_RGB565_2X8_BE, + .l.width = 10, + .l.bpp = 4, + .s.width = 8, + .s.bpp = 2, + .supported = false, + }, +}; + +static int +__vpfe_get_format(struct vpfe_device *vpfe, + struct v4l2_format *format, unsigned int *bpp); + +static struct vpfe_fmt *find_format_by_code(unsigned int code) +{ + struct vpfe_fmt *fmt; + unsigned int k; + + for (k = 0; k < ARRAY_SIZE(formats); k++) { + fmt = &formats[k]; + if (fmt->code == code) + return fmt; + } + + return NULL; +} + +static struct vpfe_fmt *find_format_by_pix(unsigned int pixelformat) +{ + struct vpfe_fmt *fmt; + unsigned int k; + + for (k = 0; k < ARRAY_SIZE(formats); k++) { + fmt = &formats[k]; + if (fmt->fourcc == pixelformat) + return fmt; + } + + return NULL; +} + +static void +mbus_to_pix(struct vpfe_device *vpfe, + const struct v4l2_mbus_framefmt *mbus, + struct v4l2_pix_format *pix, unsigned int *bpp) +{ + struct vpfe_subdev_info *sdinfo = vpfe->current_subdev; + unsigned int bus_width = sdinfo->vpfe_param.bus_width; + struct vpfe_fmt *fmt; + + fmt = find_format_by_code(mbus->code); + if (WARN_ON(fmt == NULL)) { + pr_err("Invalid mbus code set\n"); + *bpp = 1; + return; + } + + memset(pix, 0, sizeof(*pix)); + v4l2_fill_pix_format(pix, mbus); + pix->pixelformat = fmt->fourcc; + *bpp = (bus_width == 10) ? fmt->l.bpp : fmt->s.bpp; + + /* pitch should be 32 bytes aligned */ + pix->bytesperline = ALIGN(pix->width * *bpp, 32); + pix->sizeimage = pix->bytesperline * pix->height; +} + +static void pix_to_mbus(struct vpfe_device *vpfe, + struct v4l2_pix_format *pix_fmt, + struct v4l2_mbus_framefmt *mbus_fmt) +{ + struct vpfe_fmt *fmt; + + fmt = find_format_by_pix(pix_fmt->pixelformat); + if (!fmt) { + /* default to first entry */ + vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n", + pix_fmt->pixelformat); + fmt = &formats[0]; + } + + memset(mbus_fmt, 0, sizeof(*mbus_fmt)); + v4l2_fill_mbus_format(mbus_fmt, pix_fmt, fmt->code); +} + +/* Print Four-character-code (FOURCC) */ +static char *print_fourcc(u32 fmt) +{ + static char code[5]; + + code[0] = (unsigned char)(fmt & 0xff); + code[1] = (unsigned char)((fmt >> 8) & 0xff); + code[2] = (unsigned char)((fmt >> 16) & 0xff); + code[3] = (unsigned char)((fmt >> 24) & 0xff); + code[4] = '\0'; + + return code; +} + +static int +cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs) +{ + return lhs->type == rhs->type && + lhs->fmt.pix.width == rhs->fmt.pix.width && + lhs->fmt.pix.height == rhs->fmt.pix.height && + lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat && + lhs->fmt.pix.field == rhs->fmt.pix.field && + lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace && + lhs->fmt.pix.ycbcr_enc == rhs->fmt.pix.ycbcr_enc && + lhs->fmt.pix.quantization == rhs->fmt.pix.quantization; +} + +static inline u32 vpfe_reg_read(struct vpfe_ccdc *ccdc, u32 offset) +{ + return ioread32(ccdc->ccdc_cfg.base_addr + offset); +} + +static inline void vpfe_reg_write(struct vpfe_ccdc *ccdc, u32 val, u32 offset) +{ + iowrite32(val, ccdc->ccdc_cfg.base_addr + offset); +} + +static inline struct vpfe_device *to_vpfe(struct vpfe_ccdc *ccdc) +{ + return container_of(ccdc, struct vpfe_device, ccdc); +} + +static inline struct vpfe_cap_buffer *to_vpfe_buffer(struct vb2_buffer *vb) +{ + return container_of(vb, struct vpfe_cap_buffer, vb); +} + +static inline void vpfe_pcr_enable(struct vpfe_ccdc *ccdc, int flag) +{ + vpfe_reg_write(ccdc, !!flag, VPFE_PCR); +} + +static void vpfe_config_enable(struct vpfe_ccdc *ccdc, int flag) +{ + unsigned int cfg; + + if (!flag) { + cfg = vpfe_reg_read(ccdc, VPFE_CONFIG); + cfg &= ~(VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT); + } else { + cfg = VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT; + } + + vpfe_reg_write(ccdc, cfg, VPFE_CONFIG); +} + +static void vpfe_ccdc_setwin(struct vpfe_ccdc *ccdc, + struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, + int bpp) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int val, mid_img; + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left * bpp; + horz_nr_pixels = (image_win->width * bpp) - 1; + vpfe_reg_write(ccdc, (horz_start << VPFE_HORZ_INFO_SPH_SHIFT) | + horz_nr_pixels, VPFE_HORZ_INFO); + + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 */ + val = (vert_start << VPFE_VDINT_VDINT0_SHIFT); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* + * configure VDINT0 and VDINT1. VDINT1 will be at half + * of image height + */ + mid_img = vert_start + (image_win->height / 2); + val = (vert_start << VPFE_VDINT_VDINT0_SHIFT) | + (mid_img & VPFE_VDINT_VDINT1_MASK); + } + + vpfe_reg_write(ccdc, val, VPFE_VDINT); + + vpfe_reg_write(ccdc, (vert_start << VPFE_VERT_START_SLV0_SHIFT) | + vert_start, VPFE_VERT_START); + vpfe_reg_write(ccdc, vert_nr_lines, VPFE_VERT_LINES); +} + +static void vpfe_reg_dump(struct vpfe_ccdc *ccdc) +{ + struct vpfe_device *vpfe = to_vpfe(ccdc); + + vpfe_dbg(3, vpfe, "ALAW: 0x%x\n", vpfe_reg_read(ccdc, VPFE_ALAW)); + vpfe_dbg(3, vpfe, "CLAMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_CLAMP)); + vpfe_dbg(3, vpfe, "DCSUB: 0x%x\n", vpfe_reg_read(ccdc, VPFE_DCSUB)); + vpfe_dbg(3, vpfe, "BLKCMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_BLKCMP)); + vpfe_dbg(3, vpfe, "COLPTN: 0x%x\n", vpfe_reg_read(ccdc, VPFE_COLPTN)); + vpfe_dbg(3, vpfe, "SDOFST: 0x%x\n", vpfe_reg_read(ccdc, VPFE_SDOFST)); + vpfe_dbg(3, vpfe, "SYN_MODE: 0x%x\n", + vpfe_reg_read(ccdc, VPFE_SYNMODE)); + vpfe_dbg(3, vpfe, "HSIZE_OFF: 0x%x\n", + vpfe_reg_read(ccdc, VPFE_HSIZE_OFF)); + vpfe_dbg(3, vpfe, "HORZ_INFO: 0x%x\n", + vpfe_reg_read(ccdc, VPFE_HORZ_INFO)); + vpfe_dbg(3, vpfe, "VERT_START: 0x%x\n", + vpfe_reg_read(ccdc, VPFE_VERT_START)); + vpfe_dbg(3, vpfe, "VERT_LINES: 0x%x\n", + vpfe_reg_read(ccdc, VPFE_VERT_LINES)); +} + +static int +vpfe_ccdc_validate_param(struct vpfe_ccdc *ccdc, + struct vpfe_ccdc_config_params_raw *ccdcparam) +{ + struct vpfe_device *vpfe = to_vpfe(ccdc); + u8 max_gamma, max_data; + + if (!ccdcparam->alaw.enable) + return 0; + + max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd); + max_data = ccdc_data_size_max_bit(ccdcparam->data_sz); + + if (ccdcparam->alaw.gamma_wd > VPFE_CCDC_GAMMA_BITS_09_0 || + ccdcparam->alaw.gamma_wd < VPFE_CCDC_GAMMA_BITS_15_6 || + max_gamma > max_data) { + vpfe_dbg(1, vpfe, "Invalid data line select\n"); + return -EINVAL; + } + + return 0; +} + +static void +vpfe_ccdc_update_raw_params(struct vpfe_ccdc *ccdc, + struct vpfe_ccdc_config_params_raw *raw_params) +{ + struct vpfe_ccdc_config_params_raw *config_params = + &ccdc->ccdc_cfg.bayer.config_params; + + config_params = raw_params; +} + +/* + * vpfe_ccdc_restore_defaults() + * This function will write defaults to all CCDC registers + */ +static void vpfe_ccdc_restore_defaults(struct vpfe_ccdc *ccdc) +{ + int i; + + /* Disable CCDC */ + vpfe_pcr_enable(ccdc, 0); + + /* set all registers to default value */ + for (i = 4; i <= 0x94; i += 4) + vpfe_reg_write(ccdc, 0, i); + + vpfe_reg_write(ccdc, VPFE_NO_CULLING, VPFE_CULLING); + vpfe_reg_write(ccdc, VPFE_CCDC_GAMMA_BITS_11_2, VPFE_ALAW); +} + +static int vpfe_ccdc_close(struct vpfe_ccdc *ccdc, struct device *dev) +{ + int dma_cntl, i, pcr; + + /* If the CCDC module is still busy wait for it to be done */ + for (i = 0; i < 10; i++) { + usleep_range(5000, 6000); + pcr = vpfe_reg_read(ccdc, VPFE_PCR); + if (!pcr) + break; + + /* make sure it it is disabled */ + vpfe_pcr_enable(ccdc, 0); + } + + /* Disable CCDC by resetting all register to default POR values */ + vpfe_ccdc_restore_defaults(ccdc); + + /* if DMA_CNTL overflow bit is set. Clear it + * It appears to take a while for this to become quiescent ~20ms + */ + for (i = 0; i < 10; i++) { + dma_cntl = vpfe_reg_read(ccdc, VPFE_DMA_CNTL); + if (!(dma_cntl & VPFE_DMA_CNTL_OVERFLOW)) + break; + + /* Clear the overflow bit */ + vpfe_reg_write(ccdc, dma_cntl, VPFE_DMA_CNTL); + usleep_range(5000, 6000); + } + + /* Disabled the module at the CONFIG level */ + vpfe_config_enable(ccdc, 0); + + pm_runtime_put_sync(dev); + + return 0; +} + +static int vpfe_ccdc_set_params(struct vpfe_ccdc *ccdc, void __user *params) +{ + struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc); + struct vpfe_ccdc_config_params_raw raw_params; + int x; + + if (ccdc->ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&raw_params, params, sizeof(raw_params)); + if (x) { + vpfe_dbg(1, vpfe, + "vpfe_ccdc_set_params: error in copying ccdc params, %d\n", + x); + return -EFAULT; + } + + if (!vpfe_ccdc_validate_param(ccdc, &raw_params)) { + vpfe_ccdc_update_raw_params(ccdc, &raw_params); + return 0; + } + + return -EINVAL; +} + +/* + * vpfe_ccdc_config_ycbcr() + * This function will configure CCDC for YCbCr video capture + */ +static void vpfe_ccdc_config_ycbcr(struct vpfe_ccdc *ccdc) +{ + struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc); + struct ccdc_params_ycbcr *params = &ccdc->ccdc_cfg.ycbcr; + u32 syn_mode; + + vpfe_dbg(3, vpfe, "vpfe_ccdc_config_ycbcr:\n"); + /* + * first restore the CCDC registers to default values + * This is important since we assume default values to be set in + * a lot of registers that we didn't touch + */ + vpfe_ccdc_restore_defaults(ccdc); + + /* + * configure pixel format, frame format, configure video frame + * format, enable output to SDRAM, enable internal timing generator + * and 8bit pack mode + */ + syn_mode = (((params->pix_fmt & VPFE_SYN_MODE_INPMOD_MASK) << + VPFE_SYN_MODE_INPMOD_SHIFT) | + ((params->frm_fmt & VPFE_SYN_FLDMODE_MASK) << + VPFE_SYN_FLDMODE_SHIFT) | VPFE_VDHDEN_ENABLE | + VPFE_WEN_ENABLE | VPFE_DATA_PACK_ENABLE); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + vpfe_reg_write(ccdc, VPFE_REC656IF_BT656_EN, VPFE_REC656IF); + + /* + * configure the FID, VD, HD pin polarity, + * fld,hd pol positive, vd negative, 8-bit data + */ + syn_mode |= VPFE_SYN_MODE_VD_POL_NEGATIVE; + if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT) + syn_mode |= VPFE_SYN_MODE_10BITS; + else + syn_mode |= VPFE_SYN_MODE_8BITS; + } else { + /* y/c external sync mode */ + syn_mode |= (((params->fid_pol & VPFE_FID_POL_MASK) << + VPFE_FID_POL_SHIFT) | + ((params->hd_pol & VPFE_HD_POL_MASK) << + VPFE_HD_POL_SHIFT) | + ((params->vd_pol & VPFE_VD_POL_MASK) << + VPFE_VD_POL_SHIFT)); + } + vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE); + + /* configure video window */ + vpfe_ccdc_setwin(ccdc, ¶ms->win, + params->frm_fmt, params->bytesperpixel); + + /* + * configure the order of y cb cr in SDRAM, and disable latch + * internal register on vsync + */ + if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT) + vpfe_reg_write(ccdc, + (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) | + VPFE_LATCH_ON_VSYNC_DISABLE | + VPFE_CCDCFG_BW656_10BIT, VPFE_CCDCFG); + else + vpfe_reg_write(ccdc, + (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) | + VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG); + + /* + * configure the horizontal line offset. This should be a + * on 32 byte boundary. So clear LSB 5 bits + */ + vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + /* two fields are interleaved in memory */ + vpfe_reg_write(ccdc, VPFE_SDOFST_FIELD_INTERLEAVED, + VPFE_SDOFST); +} + +static void +vpfe_ccdc_config_black_clamp(struct vpfe_ccdc *ccdc, + struct vpfe_ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->enable) { + /* configure DCSub */ + val = (bclamp->dc_sub) & VPFE_BLK_DC_SUB_MASK; + vpfe_reg_write(ccdc, val, VPFE_DCSUB); + vpfe_reg_write(ccdc, VPFE_CLAMP_DEFAULT_VAL, VPFE_CLAMP); + return; + } + /* + * Configure gain, Start pixel, No of line to be avg, + * No of pixel/line to be avg, & Enable the Black clamping + */ + val = ((bclamp->sgain & VPFE_BLK_SGAIN_MASK) | + ((bclamp->start_pixel & VPFE_BLK_ST_PXL_MASK) << + VPFE_BLK_ST_PXL_SHIFT) | + ((bclamp->sample_ln & VPFE_BLK_SAMPLE_LINE_MASK) << + VPFE_BLK_SAMPLE_LINE_SHIFT) | + ((bclamp->sample_pixel & VPFE_BLK_SAMPLE_LN_MASK) << + VPFE_BLK_SAMPLE_LN_SHIFT) | VPFE_BLK_CLAMP_ENABLE); + vpfe_reg_write(ccdc, val, VPFE_CLAMP); + /* If Black clamping is enable then make dcsub 0 */ + vpfe_reg_write(ccdc, VPFE_DCSUB_DEFAULT_VAL, VPFE_DCSUB); +} + +static void +vpfe_ccdc_config_black_compense(struct vpfe_ccdc *ccdc, + struct vpfe_ccdc_black_compensation *bcomp) +{ + u32 val; + + val = ((bcomp->b & VPFE_BLK_COMP_MASK) | + ((bcomp->gb & VPFE_BLK_COMP_MASK) << + VPFE_BLK_COMP_GB_COMP_SHIFT) | + ((bcomp->gr & VPFE_BLK_COMP_MASK) << + VPFE_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & VPFE_BLK_COMP_MASK) << + VPFE_BLK_COMP_R_COMP_SHIFT)); + vpfe_reg_write(ccdc, val, VPFE_BLKCMP); +} + +/* + * vpfe_ccdc_config_raw() + * This function will configure CCDC for Raw capture mode + */ +static void vpfe_ccdc_config_raw(struct vpfe_ccdc *ccdc) +{ + struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc); + struct vpfe_ccdc_config_params_raw *config_params = + &ccdc->ccdc_cfg.bayer.config_params; + struct ccdc_params_raw *params = &ccdc->ccdc_cfg.bayer; + unsigned int syn_mode; + unsigned int val; + + vpfe_dbg(3, vpfe, "vpfe_ccdc_config_raw:\n"); + + /* Reset CCDC */ + vpfe_ccdc_restore_defaults(ccdc); + + /* Disable latching function registers on VSYNC */ + vpfe_reg_write(ccdc, VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG); + + /* + * Configure the vertical sync polarity(SYN_MODE.VDPOL), + * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity + * (SYN_MODE.FLDPOL), frame format(progressive or interlace), + * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output + * SDRAM, enable internal timing generator + */ + syn_mode = (((params->vd_pol & VPFE_VD_POL_MASK) << VPFE_VD_POL_SHIFT) | + ((params->hd_pol & VPFE_HD_POL_MASK) << VPFE_HD_POL_SHIFT) | + ((params->fid_pol & VPFE_FID_POL_MASK) << + VPFE_FID_POL_SHIFT) | ((params->frm_fmt & + VPFE_FRM_FMT_MASK) << VPFE_FRM_FMT_SHIFT) | + ((config_params->data_sz & VPFE_DATA_SZ_MASK) << + VPFE_DATA_SZ_SHIFT) | ((params->pix_fmt & + VPFE_PIX_FMT_MASK) << VPFE_PIX_FMT_SHIFT) | + VPFE_WEN_ENABLE | VPFE_VDHDEN_ENABLE); + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val = ((config_params->alaw.gamma_wd & + VPFE_ALAW_GAMMA_WD_MASK) | VPFE_ALAW_ENABLE); + vpfe_reg_write(ccdc, val, VPFE_ALAW); + vpfe_dbg(3, vpfe, "\nWriting 0x%x to ALAW...\n", val); + } + + /* Configure video window */ + vpfe_ccdc_setwin(ccdc, ¶ms->win, params->frm_fmt, + params->bytesperpixel); + + /* Configure Black Clamp */ + vpfe_ccdc_config_black_clamp(ccdc, &config_params->blk_clamp); + + /* Configure Black level compensation */ + vpfe_ccdc_config_black_compense(ccdc, &config_params->blk_comp); + + /* If data size is 8 bit then pack the data */ + if ((config_params->data_sz == VPFE_CCDC_DATA_8BITS) || + config_params->alaw.enable) + syn_mode |= VPFE_DATA_PACK_ENABLE; + + /* + * Configure Horizontal offset register. If pack 8 is enabled then + * 1 pixel will take 1 byte + */ + vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF); + + vpfe_dbg(3, vpfe, "Writing %d (%x) to HSIZE_OFF\n", + params->bytesperline, params->bytesperline); + + /* Set value for SDOFST */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For interlace inverse mode */ + vpfe_reg_write(ccdc, VPFE_INTERLACED_IMAGE_INVERT, + VPFE_SDOFST); + } else { + /* For interlace non inverse mode */ + vpfe_reg_write(ccdc, VPFE_INTERLACED_NO_IMAGE_INVERT, + VPFE_SDOFST); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + vpfe_reg_write(ccdc, VPFE_PROGRESSIVE_NO_IMAGE_INVERT, + VPFE_SDOFST); + } + + vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE); + + vpfe_reg_dump(ccdc); +} + +static inline int +vpfe_ccdc_set_buftype(struct vpfe_ccdc *ccdc, + enum ccdc_buftype buf_type) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc->ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc->ccdc_cfg.ycbcr.buf_type = buf_type; + + return 0; +} + +static inline enum ccdc_buftype vpfe_ccdc_get_buftype(struct vpfe_ccdc *ccdc) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc->ccdc_cfg.bayer.buf_type; + + return ccdc->ccdc_cfg.ycbcr.buf_type; +} + +static int vpfe_ccdc_set_pixel_format(struct vpfe_ccdc *ccdc, u32 pixfmt) +{ + struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc); + + vpfe_dbg(1, vpfe, "vpfe_ccdc_set_pixel_format: if_type: %d, pixfmt:%s\n", + ccdc->ccdc_cfg.if_type, print_fourcc(pixfmt)); + + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + /* + * Need to clear it in case it was left on + * after the last capture. + */ + ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 0; + + switch (pixfmt) { + case V4L2_PIX_FMT_SBGGR8: + ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 1; + break; + + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_RGB565X: + break; + + case V4L2_PIX_FMT_SBGGR16: + default: + return -EINVAL; + } + } else { + switch (pixfmt) { + case V4L2_PIX_FMT_YUYV: + ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + break; + + case V4L2_PIX_FMT_UYVY: + ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + + default: + return -EINVAL; + } + } + + return 0; +} + +static u32 vpfe_ccdc_get_pixel_format(struct vpfe_ccdc *ccdc) +{ + u32 pixfmt; + + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) { + pixfmt = V4L2_PIX_FMT_YUYV; + } else { + if (ccdc->ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + + return pixfmt; +} + +static int +vpfe_ccdc_set_image_window(struct vpfe_ccdc *ccdc, + struct v4l2_rect *win, unsigned int bpp) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc->ccdc_cfg.bayer.win = *win; + ccdc->ccdc_cfg.bayer.bytesperpixel = bpp; + ccdc->ccdc_cfg.bayer.bytesperline = ALIGN(win->width * bpp, 32); + } else { + ccdc->ccdc_cfg.ycbcr.win = *win; + ccdc->ccdc_cfg.ycbcr.bytesperpixel = bpp; + ccdc->ccdc_cfg.ycbcr.bytesperline = ALIGN(win->width * bpp, 32); + } + + return 0; +} + +static inline void +vpfe_ccdc_get_image_window(struct vpfe_ccdc *ccdc, + struct v4l2_rect *win) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc->ccdc_cfg.bayer.win; + else + *win = ccdc->ccdc_cfg.ycbcr.win; +} + +static inline unsigned int vpfe_ccdc_get_line_length(struct vpfe_ccdc *ccdc) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc->ccdc_cfg.bayer.bytesperline; + + return ccdc->ccdc_cfg.ycbcr.bytesperline; +} + +static inline int +vpfe_ccdc_set_frame_format(struct vpfe_ccdc *ccdc, + enum ccdc_frmfmt frm_fmt) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc->ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc->ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + + return 0; +} + +static inline enum ccdc_frmfmt +vpfe_ccdc_get_frame_format(struct vpfe_ccdc *ccdc) +{ + if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc->ccdc_cfg.bayer.frm_fmt; + + return ccdc->ccdc_cfg.ycbcr.frm_fmt; +} + +static inline int vpfe_ccdc_getfid(struct vpfe_ccdc *ccdc) +{ + return (vpfe_reg_read(ccdc, VPFE_SYNMODE) >> 15) & 1; +} + +static inline void vpfe_set_sdr_addr(struct vpfe_ccdc *ccdc, unsigned long addr) +{ + vpfe_reg_write(ccdc, addr & 0xffffffe0, VPFE_SDR_ADDR); +} + +static int vpfe_ccdc_set_hw_if_params(struct vpfe_ccdc *ccdc, + struct vpfe_hw_if_param *params) +{ + struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc); + + ccdc->ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + case VPFE_BT656_10BIT: + ccdc->ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc->ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + + case VPFE_RAW_BAYER: + ccdc->ccdc_cfg.bayer.vd_pol = params->vdpol; + ccdc->ccdc_cfg.bayer.hd_pol = params->hdpol; + if (params->bus_width == 10) + ccdc->ccdc_cfg.bayer.config_params.data_sz = + VPFE_CCDC_DATA_10BITS; + else + ccdc->ccdc_cfg.bayer.config_params.data_sz = + VPFE_CCDC_DATA_8BITS; + vpfe_dbg(1, vpfe, "params.bus_width: %d\n", + params->bus_width); + vpfe_dbg(1, vpfe, "config_params.data_sz: %d\n", + ccdc->ccdc_cfg.bayer.config_params.data_sz); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static void vpfe_clear_intr(struct vpfe_ccdc *ccdc, int vdint) +{ + unsigned int vpfe_int_status; + + vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS); + + switch (vdint) { + /* VD0 interrupt */ + case VPFE_VDINT0: + vpfe_int_status &= ~VPFE_VDINT0; + vpfe_int_status |= VPFE_VDINT0; + break; + + /* VD1 interrupt */ + case VPFE_VDINT1: + vpfe_int_status &= ~VPFE_VDINT1; + vpfe_int_status |= VPFE_VDINT1; + break; + + /* VD2 interrupt */ + case VPFE_VDINT2: + vpfe_int_status &= ~VPFE_VDINT2; + vpfe_int_status |= VPFE_VDINT2; + break; + + /* Clear all interrupts */ + default: + vpfe_int_status &= ~(VPFE_VDINT0 | + VPFE_VDINT1 | + VPFE_VDINT2); + vpfe_int_status |= (VPFE_VDINT0 | + VPFE_VDINT1 | + VPFE_VDINT2); + break; + } + /* Clear specific VDINT from the status register */ + vpfe_reg_write(ccdc, vpfe_int_status, VPFE_IRQ_STS); + + vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS); + + /* Acknowledge that we are done with all interrupts */ + vpfe_reg_write(ccdc, 1, VPFE_IRQ_EOI); +} + +static void vpfe_ccdc_config_defaults(struct vpfe_ccdc *ccdc) +{ + ccdc->ccdc_cfg.if_type = VPFE_RAW_BAYER; + + ccdc->ccdc_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; + ccdc->ccdc_cfg.ycbcr.frm_fmt = CCDC_FRMFMT_INTERLACED; + ccdc->ccdc_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE; + ccdc->ccdc_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE; + ccdc->ccdc_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE; + ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + ccdc->ccdc_cfg.ycbcr.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED; + + ccdc->ccdc_cfg.ycbcr.win.left = 0; + ccdc->ccdc_cfg.ycbcr.win.top = 0; + ccdc->ccdc_cfg.ycbcr.win.width = 720; + ccdc->ccdc_cfg.ycbcr.win.height = 576; + ccdc->ccdc_cfg.ycbcr.bt656_enable = 1; + + ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + ccdc->ccdc_cfg.bayer.frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + ccdc->ccdc_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE; + ccdc->ccdc_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE; + ccdc->ccdc_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE; + + ccdc->ccdc_cfg.bayer.win.left = 0; + ccdc->ccdc_cfg.bayer.win.top = 0; + ccdc->ccdc_cfg.bayer.win.width = 800; + ccdc->ccdc_cfg.bayer.win.height = 600; + ccdc->ccdc_cfg.bayer.config_params.data_sz = VPFE_CCDC_DATA_8BITS; + ccdc->ccdc_cfg.bayer.config_params.alaw.gamma_wd = + VPFE_CCDC_GAMMA_BITS_09_0; +} + +/* + * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings + */ +static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe, + struct v4l2_format *f) +{ + struct v4l2_rect image_win; + enum ccdc_buftype buf_type; + enum ccdc_frmfmt frm_fmt; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win); + f->fmt.pix.width = image_win.width; + f->fmt.pix.height = image_win.height; + f->fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * + f->fmt.pix.height; + buf_type = vpfe_ccdc_get_buftype(&vpfe->ccdc); + f->fmt.pix.pixelformat = vpfe_ccdc_get_pixel_format(&vpfe->ccdc); + frm_fmt = vpfe_ccdc_get_frame_format(&vpfe->ccdc); + + if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + f->fmt.pix.field = V4L2_FIELD_NONE; + } else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + } else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) { + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + } else { + vpfe_err(vpfe, "Invalid buf_type\n"); + return -EINVAL; + } + } else { + vpfe_err(vpfe, "Invalid frm_fmt\n"); + return -EINVAL; + } + return 0; +} + +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret; + + vpfe_dbg(2, vpfe, "vpfe_config_ccdc_image_format\n"); + + vpfe_dbg(1, vpfe, "pixelformat: %s\n", + print_fourcc(vpfe->fmt.fmt.pix.pixelformat)); + + if (vpfe_ccdc_set_pixel_format(&vpfe->ccdc, + vpfe->fmt.fmt.pix.pixelformat) < 0) { + vpfe_err(vpfe, "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + + /* configure the image window */ + vpfe_ccdc_set_image_window(&vpfe->ccdc, &vpfe->crop, vpfe->bpp); + + switch (vpfe->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = vpfe_ccdc_set_buftype( + &vpfe->ccdc, + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + + case V4L2_FIELD_SEQ_TB: + ret = vpfe_ccdc_set_buftype( + &vpfe->ccdc, + CCDC_BUFTYPE_FLD_SEPARATED); + break; + + default: + return -EINVAL; + } + + if (ret) + return ret; + + return vpfe_ccdc_set_frame_format(&vpfe->ccdc, frm_fmt); +} + +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device support g_mbus_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe, + v4l2_std_id std_id) +{ + struct v4l2_pix_format *pix = &vpfe->fmt.fmt.pix; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & std_id) { + vpfe->std_info.active_pixels = + vpfe_standards[i].width; + vpfe->std_info.active_lines = + vpfe_standards[i].height; + vpfe->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe->std_index = i; + + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + vpfe_err(vpfe, "standard not supported\n"); + return -EINVAL; + } + + vpfe->crop.top = vpfe->crop.left = 0; + vpfe->crop.width = vpfe->std_info.active_pixels; + vpfe->crop.height = vpfe->std_info.active_lines; + pix->width = vpfe->crop.width; + pix->height = vpfe->crop.height; + pix->pixelformat = V4L2_PIX_FMT_YUYV; + + /* first field and frame format based on standard frame format */ + if (vpfe->std_info.frame_format) + pix->field = V4L2_FIELD_INTERLACED; + else + pix->field = V4L2_FIELD_NONE; + + ret = __vpfe_get_format(vpfe, &vpfe->fmt, &vpfe->bpp); + if (ret) + return ret; + + /* Update the crop window based on found values */ + vpfe->crop.width = pix->width; + vpfe->crop.height = pix->height; + + return vpfe_config_ccdc_image_format(vpfe); +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe) +{ + struct vpfe_subdev_info *sdinfo; + int ret; + + sdinfo = &vpfe->cfg->sub_devs[0]; + sdinfo->sd = vpfe->sd[0]; + vpfe->current_input = 0; + vpfe->std_index = 0; + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe, + vpfe_standards[vpfe->std_index].std_id); + if (ret) + return ret; + + pm_runtime_get_sync(vpfe->pdev); + + vpfe_config_enable(&vpfe->ccdc, 1); + + vpfe_ccdc_restore_defaults(&vpfe->ccdc); + + /* Clear all VPFE interrupts */ + vpfe_clear_intr(&vpfe->ccdc, -1); + + return ret; +} + +/* + * vpfe_release : This function is based on the vb2_fop_release + * helper function. + * It has been augmented to handle module power management, + * by disabling/enabling h/w module fcntl clock when necessary. + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe = video_drvdata(file); + int ret; + + mutex_lock(&vpfe->lock); + + ret = _vb2_fop_release(file, NULL); + if (v4l2_fh_is_singular_file(file)) + vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev); + + mutex_unlock(&vpfe->lock); + + return ret; +} + +/* + * vpfe_open : This function is based on the v4l2_fh_open helper function. + * It has been augmented to handle module power management, + * by disabling/enabling h/w module fcntl clock when necessary. + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe = video_drvdata(file); + int ret; + + mutex_lock(&vpfe->lock); + + ret = v4l2_fh_open(file); + if (ret) { + vpfe_err(vpfe, "v4l2_fh_open failed\n"); + goto unlock; + } + + if (!v4l2_fh_is_singular_file(file)) + goto unlock; + + if (vpfe_initialize_device(vpfe)) { + v4l2_fh_release(file); + ret = -ENODEV; + } + +unlock: + mutex_unlock(&vpfe->lock); + return ret; +} + +/** + * vpfe_schedule_next_buffer: set next buffer address for capture + * @vpfe : ptr to vpfe device + * + * This function will get next buffer from the dma queue and + * set the buffer address in the vpfe register for capture. + * the buffer is marked active + * + * Assumes caller is holding vpfe->dma_queue_lock already + */ +static inline void vpfe_schedule_next_buffer(struct vpfe_device *vpfe) +{ + vpfe->next_frm = list_entry(vpfe->dma_queue.next, + struct vpfe_cap_buffer, list); + list_del(&vpfe->next_frm->list); + + vpfe_set_sdr_addr(&vpfe->ccdc, + vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0)); +} + +static inline void vpfe_schedule_bottom_field(struct vpfe_device *vpfe) +{ + unsigned long addr; + + addr = vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0) + + vpfe->field_off; + + vpfe_set_sdr_addr(&vpfe->ccdc, addr); +} + +/* + * vpfe_process_buffer_complete: process a completed buffer + * @vpfe : ptr to vpfe device + * + * This function time stamp the buffer and mark it as DONE. It also + * wake up any process waiting on the QUEUE and set the next buffer + * as current + */ +static inline void vpfe_process_buffer_complete(struct vpfe_device *vpfe) +{ + v4l2_get_timestamp(&vpfe->cur_frm->vb.v4l2_buf.timestamp); + vpfe->cur_frm->vb.v4l2_buf.field = vpfe->fmt.fmt.pix.field; + vpfe->cur_frm->vb.v4l2_buf.sequence = vpfe->sequence++; + vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_DONE); + vpfe->cur_frm = vpfe->next_frm; +} + +/* + * vpfe_isr : ISR handler for vpfe capture (VINT0) + * @irq: irq number + * @dev_id: dev_id ptr + * + * It changes status of the captured buffer, takes next buffer from the queue + * and sets its address in VPFE registers + */ +static irqreturn_t vpfe_isr(int irq, void *dev) +{ + struct vpfe_device *vpfe = (struct vpfe_device *)dev; + enum v4l2_field field; + int intr_status; + int fid; + + intr_status = vpfe_reg_read(&vpfe->ccdc, VPFE_IRQ_STS); + + if (intr_status & VPFE_VDINT0) { + field = vpfe->fmt.fmt.pix.field; + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + if (vpfe->cur_frm != vpfe->next_frm) + vpfe_process_buffer_complete(vpfe); + goto next_intr; + } + + /* interlaced or TB capture check which field + we are in hardware */ + fid = vpfe_ccdc_getfid(&vpfe->ccdc); + + /* switch the software maintained field id */ + vpfe->field ^= 1; + if (fid == vpfe->field) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the + * next frame is available, release the + * current frame and move on + */ + if (vpfe->cur_frm != vpfe->next_frm) + vpfe_process_buffer_complete(vpfe); + /* + * based on whether the two fields are stored + * interleave or separately in memory, + * reconfigure the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) + vpfe_schedule_bottom_field(vpfe); + + goto next_intr; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe->dma_queue_lock); + if (!list_empty(&vpfe->dma_queue) && + vpfe->cur_frm == vpfe->next_frm) + vpfe_schedule_next_buffer(vpfe); + spin_unlock(&vpfe->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe->field = fid; + } + } + +next_intr: + if (intr_status & VPFE_VDINT1) { + spin_lock(&vpfe->dma_queue_lock); + if (vpfe->fmt.fmt.pix.field == V4L2_FIELD_NONE && + !list_empty(&vpfe->dma_queue) && + vpfe->cur_frm == vpfe->next_frm) + vpfe_schedule_next_buffer(vpfe); + spin_unlock(&vpfe->dma_queue_lock); + } + + vpfe_clear_intr(&vpfe->ccdc, intr_status); + + return IRQ_HANDLED; +} + +static inline void vpfe_detach_irq(struct vpfe_device *vpfe) +{ + unsigned int intr = VPFE_VDINT0; + enum ccdc_frmfmt frame_format; + + frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + intr |= VPFE_VDINT1; + + vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_CLR); +} + +static inline void vpfe_attach_irq(struct vpfe_device *vpfe) +{ + unsigned int intr = VPFE_VDINT0; + enum ccdc_frmfmt frame_format; + + frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + intr |= VPFE_VDINT1; + + vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_SET); +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + vpfe_dbg(2, vpfe, "vpfe_querycap\n"); + + strlcpy(cap->driver, VPFE_MODULE_NAME, sizeof(cap->driver)); + strlcpy(cap->card, "TI AM437x VPFE", sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", vpfe->v4l2_dev.name); + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + + return 0; +} + +/* get the format set at output pad of the adjacent subdev */ +static int __vpfe_get_format(struct vpfe_device *vpfe, + struct v4l2_format *format, unsigned int *bpp) +{ + struct v4l2_mbus_framefmt mbus_fmt; + struct vpfe_subdev_info *sdinfo; + struct v4l2_subdev_format fmt; + int ret; + + sdinfo = vpfe->current_subdev; + if (!sdinfo->sd) + return -EINVAL; + + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + fmt.pad = 0; + + ret = v4l2_subdev_call(sdinfo->sd, pad, get_fmt, NULL, &fmt); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + if (!ret) { + v4l2_fill_pix_format(&format->fmt.pix, &fmt.format); + mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp); + } else { + ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, + sdinfo->grp_id, + video, g_mbus_fmt, + &mbus_fmt); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt); + mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp); + } + + format->type = vpfe->fmt.type; + + vpfe_dbg(1, vpfe, + "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n", + __func__, format->fmt.pix.width, format->fmt.pix.height, + print_fourcc(format->fmt.pix.pixelformat), + format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp); + + return 0; +} + +/* set the format at output pad of the adjacent subdev */ +static int __vpfe_set_format(struct vpfe_device *vpfe, + struct v4l2_format *format, unsigned int *bpp) +{ + struct v4l2_mbus_framefmt mbus_fmt; + struct vpfe_subdev_info *sdinfo; + struct v4l2_subdev_format fmt; + int ret; + + vpfe_dbg(2, vpfe, "__vpfe_set_format\n"); + + sdinfo = vpfe->current_subdev; + if (!sdinfo->sd) + return -EINVAL; + + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + fmt.pad = 0; + + pix_to_mbus(vpfe, &format->fmt.pix, &fmt.format); + + ret = v4l2_subdev_call(sdinfo->sd, pad, set_fmt, NULL, &fmt); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + if (!ret) { + v4l2_fill_pix_format(&format->fmt.pix, &fmt.format); + mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp); + } else { + ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, + sdinfo->grp_id, + video, s_mbus_fmt, + &mbus_fmt); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt); + mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp); + } + + format->type = vpfe->fmt.type; + + vpfe_dbg(1, vpfe, + "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n", + __func__, format->fmt.pix.width, format->fmt.pix.height, + print_fourcc(format->fmt.pix.pixelformat), + format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp); + + return 0; +} + +static int vpfe_g_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + vpfe_dbg(2, vpfe, "vpfe_g_fmt\n"); + + *fmt = vpfe->fmt; + + return 0; +} + +static int vpfe_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + struct vpfe_fmt *fmt = NULL; + unsigned int k; + + vpfe_dbg(2, vpfe, "vpfe_enum_format index:%d\n", + f->index); + + sdinfo = vpfe->current_subdev; + if (!sdinfo->sd) + return -EINVAL; + + if (f->index > ARRAY_SIZE(formats)) + return -EINVAL; + + for (k = 0; k < ARRAY_SIZE(formats); k++) { + if (formats[k].index == f->index) { + fmt = &formats[k]; + break; + } + } + if (!fmt) + return -EINVAL; + + strncpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + f->type = vpfe->fmt.type; + + vpfe_dbg(1, vpfe, "vpfe_enum_format: mbus index: %d code: %x pixelformat: %s [%s]\n", + f->index, fmt->code, print_fourcc(fmt->fourcc), fmt->name); + + return 0; +} + +static int vpfe_try_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe = video_drvdata(file); + unsigned int bpp; + + vpfe_dbg(2, vpfe, "vpfe_try_fmt\n"); + + return __vpfe_get_format(vpfe, fmt, &bpp); +} + +static int vpfe_s_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct v4l2_format format; + unsigned int bpp; + int ret; + + vpfe_dbg(2, vpfe, "vpfe_s_fmt\n"); + + /* If streaming is started, return error */ + if (vb2_is_busy(&vpfe->buffer_queue)) { + vpfe_err(vpfe, "%s device busy\n", __func__); + return -EBUSY; + } + + ret = vpfe_try_fmt(file, priv, fmt); + if (ret) + return ret; + + + if (!cmp_v4l2_format(fmt, &format)) { + /* Sensor format is different from the requested format + * so we need to change it + */ + ret = __vpfe_set_format(vpfe, fmt, &bpp); + if (ret) + return ret; + } else /* Just make sure all of the fields are consistent */ + *fmt = format; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe); + vpfe->fmt = *fmt; + vpfe->bpp = bpp; + + /* Update the crop window based on found values */ + vpfe->crop.width = fmt->fmt.pix.width; + vpfe->crop.height = fmt->fmt.pix.height; + + /* set image capture parameters in the ccdc */ + return vpfe_config_ccdc_image_format(vpfe); +} + +static int vpfe_enum_size(struct file *file, void *priv, + struct v4l2_frmsizeenum *fsize) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct v4l2_subdev_frame_size_enum fse; + struct vpfe_subdev_info *sdinfo; + struct v4l2_mbus_framefmt mbus; + struct v4l2_pix_format pix; + struct vpfe_fmt *fmt; + int ret; + + vpfe_dbg(2, vpfe, "vpfe_enum_size\n"); + + /* check for valid format */ + fmt = find_format_by_pix(fsize->pixel_format); + if (!fmt) { + vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n", + fsize->pixel_format); + return -EINVAL; + } + + memset(fsize->reserved, 0x0, sizeof(fsize->reserved)); + + sdinfo = vpfe->current_subdev; + if (!sdinfo->sd) + return -EINVAL; + + memset(&pix, 0x0, sizeof(pix)); + /* Construct pix from parameter and use default for the rest */ + pix.pixelformat = fsize->pixel_format; + pix.width = 640; + pix.height = 480; + pix.colorspace = V4L2_COLORSPACE_SRGB; + pix.field = V4L2_FIELD_NONE; + pix_to_mbus(vpfe, &pix, &mbus); + + memset(&fse, 0x0, sizeof(fse)); + fse.index = fsize->index; + fse.pad = 0; + fse.code = mbus.code; + ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse); + if (ret) + return -EINVAL; + + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n", + fse.index, fse.code, fse.min_width, fse.max_width, + fse.min_height, fse.max_height); + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = fse.max_width; + fsize->discrete.height = fse.max_height; + + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n", + fsize->index, print_fourcc(fsize->pixel_format), + fsize->discrete.width, fsize->discrete.height); + + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int +vpfe_get_subdev_input_index(struct vpfe_device *vpfe, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + 1)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j++; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe->current_subdev->name)) { + if (vpfe->current_input >= 1) + return -1; + *app_input_index = j + vpfe->current_input; + return 0; + } + j++; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index; + + vpfe_dbg(2, vpfe, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe, &subdev, &index, + inp->index) < 0) { + vpfe_dbg(1, vpfe, + "input information not found for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe->cfg->sub_devs[subdev]; + *inp = sdinfo->inputs[index]; + + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + vpfe_dbg(2, vpfe, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe, index); +} + +/* Assumes caller is holding vpfe_dev->lock */ +static int vpfe_set_input(struct vpfe_device *vpfe, unsigned int index) +{ + int subdev_index = 0, inp_index = 0; + struct vpfe_subdev_info *sdinfo; + struct vpfe_route *route; + u32 input, output; + int ret; + + vpfe_dbg(2, vpfe, "vpfe_set_input: index: %d\n", index); + + /* If streaming is started, return error */ + if (vb2_is_busy(&vpfe->buffer_queue)) { + vpfe_err(vpfe, "%s device busy\n", __func__); + return -EBUSY; + } + ret = vpfe_get_subdev_input_index(vpfe, + &subdev_index, + &inp_index, + index); + if (ret < 0) { + vpfe_err(vpfe, "invalid input index: %d\n", index); + goto get_out; + } + + sdinfo = &vpfe->cfg->sub_devs[subdev_index]; + sdinfo->sd = vpfe->sd[subdev_index]; + route = &sdinfo->routes[inp_index]; + if (route && sdinfo->can_route) { + input = route->input; + output = route->output; + if (sdinfo->sd) { + ret = v4l2_subdev_call(sdinfo->sd, video, + s_routing, input, output, 0); + if (ret) { + vpfe_err(vpfe, "s_routing failed\n"); + ret = -EINVAL; + goto get_out; + } + } + + } + + vpfe->current_subdev = sdinfo; + if (sdinfo->sd) + vpfe->v4l2_dev.ctrl_handler = sdinfo->sd->ctrl_handler; + vpfe->current_input = index; + vpfe->std_index = 0; + + /* set the bus/interface parameter for the sub device in ccdc */ + ret = vpfe_ccdc_set_hw_if_params(&vpfe->ccdc, &sdinfo->vpfe_param); + if (ret) + return ret; + + /* set the default image parameters in the device */ + return vpfe_config_image_format(vpfe, + vpfe_standards[vpfe->std_index].std_id); + +get_out: + return ret; +} + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + vpfe_dbg(2, vpfe, + "vpfe_s_input: index: %d\n", index); + + return vpfe_set_input(vpfe, index); +} + +static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + + vpfe_dbg(2, vpfe, "vpfe_querystd\n"); + + sdinfo = vpfe->current_subdev; + if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD)) + return -ENODATA; + + /* Call querystd function of decoder device */ + return v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id, + video, querystd, std_id); +} + +static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret; + + vpfe_dbg(2, vpfe, "vpfe_s_std\n"); + + sdinfo = vpfe->current_subdev; + if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD)) + return -ENODATA; + + /* If streaming is started, return error */ + if (vb2_is_busy(&vpfe->buffer_queue)) { + vpfe_err(vpfe, "%s device busy\n", __func__); + ret = -EBUSY; + return ret; + } + + ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id, + video, s_std, std_id); + if (ret < 0) { + vpfe_err(vpfe, "Failed to set standard\n"); + return ret; + } + ret = vpfe_config_image_format(vpfe, std_id); + + return ret; +} + +static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + + vpfe_dbg(2, vpfe, "vpfe_g_std\n"); + + sdinfo = vpfe->current_subdev; + if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD) + return -ENODATA; + + *std_id = vpfe_standards[vpfe->std_index].std_id; + + return 0; +} + +/* + * vpfe_calculate_offsets : This function calculates buffers offset + * for top and bottom field + */ +static void vpfe_calculate_offsets(struct vpfe_device *vpfe) +{ + struct v4l2_rect image_win; + + vpfe_dbg(2, vpfe, "vpfe_calculate_offsets\n"); + + vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win); + vpfe->field_off = image_win.height * image_win.width; +} + +/* + * vpfe_queue_setup - Callback function for buffer setup. + * @vq: vb2_queue ptr + * @fmt: v4l2 format + * @nbuffers: ptr to number of buffers requested by application + * @nplanes:: contains number of distinct video planes needed to hold a frame + * @sizes[]: contains the size (in bytes) of each plane. + * @alloc_ctxs: ptr to allocation context + * + * This callback function is called when reqbuf() is called to adjust + * the buffer count and buffer size + */ +static int vpfe_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct vpfe_device *vpfe = vb2_get_drv_priv(vq); + + if (fmt && fmt->fmt.pix.sizeimage < vpfe->fmt.fmt.pix.sizeimage) + return -EINVAL; + + if (vq->num_buffers + *nbuffers < 3) + *nbuffers = 3 - vq->num_buffers; + + *nplanes = 1; + sizes[0] = fmt ? fmt->fmt.pix.sizeimage : vpfe->fmt.fmt.pix.sizeimage; + alloc_ctxs[0] = vpfe->alloc_ctx; + + vpfe_dbg(1, vpfe, + "nbuffers=%d, size=%u\n", *nbuffers, sizes[0]); + + /* Calculate field offset */ + vpfe_calculate_offsets(vpfe); + + return 0; +} + +/* + * vpfe_buffer_prepare : callback function for buffer prepare + * @vb: ptr to vb2_buffer + * + * This is the callback function for buffer prepare when vb2_qbuf() + * function is called. The buffer is prepared and user space virtual address + * or user address is converted into physical address + */ +static int vpfe_buffer_prepare(struct vb2_buffer *vb) +{ + struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue); + + vb2_set_plane_payload(vb, 0, vpfe->fmt.fmt.pix.sizeimage); + + if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + return -EINVAL; + + vb->v4l2_buf.field = vpfe->fmt.fmt.pix.field; + + return 0; +} + +/* + * vpfe_buffer_queue : Callback function to add buffer to DMA queue + * @vb: ptr to vb2_buffer + */ +static void vpfe_buffer_queue(struct vb2_buffer *vb) +{ + struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue); + struct vpfe_cap_buffer *buf = to_vpfe_buffer(vb); + unsigned long flags = 0; + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&vpfe->dma_queue_lock, flags); + list_add_tail(&buf->list, &vpfe->dma_queue); + spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags); +} + +/* + * vpfe_start_streaming : Starts the DMA engine for streaming + * @vb: ptr to vb2_buffer + * @count: number of buffers + */ +static int vpfe_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpfe_device *vpfe = vb2_get_drv_priv(vq); + struct vpfe_cap_buffer *buf, *tmp; + struct vpfe_subdev_info *sdinfo; + unsigned long flags; + unsigned long addr; + int ret; + + spin_lock_irqsave(&vpfe->dma_queue_lock, flags); + + vpfe->field = 0; + vpfe->sequence = 0; + + sdinfo = vpfe->current_subdev; + + vpfe_attach_irq(vpfe); + + if (vpfe->ccdc.ccdc_cfg.if_type == VPFE_RAW_BAYER) + vpfe_ccdc_config_raw(&vpfe->ccdc); + else + vpfe_ccdc_config_ycbcr(&vpfe->ccdc); + + /* Get the next frame from the buffer queue */ + vpfe->next_frm = list_entry(vpfe->dma_queue.next, + struct vpfe_cap_buffer, list); + vpfe->cur_frm = vpfe->next_frm; + /* Remove buffer from the buffer queue */ + list_del(&vpfe->cur_frm->list); + spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags); + + addr = vb2_dma_contig_plane_dma_addr(&vpfe->cur_frm->vb, 0); + + vpfe_set_sdr_addr(&vpfe->ccdc, (unsigned long)(addr)); + + vpfe_pcr_enable(&vpfe->ccdc, 1); + + ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 1); + if (ret < 0) { + vpfe_err(vpfe, "Error in attaching interrupt handle\n"); + goto err; + } + + return 0; + +err: + list_for_each_entry_safe(buf, tmp, &vpfe->dma_queue, list) { + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED); + } + spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags); + + return ret; +} + +/* + * vpfe_stop_streaming : Stop the DMA engine + * @vq: ptr to vb2_queue + * + * This callback stops the DMA engine and any remaining buffers + * in the DMA queue are released. + */ +static void vpfe_stop_streaming(struct vb2_queue *vq) +{ + struct vpfe_device *vpfe = vb2_get_drv_priv(vq); + struct vpfe_subdev_info *sdinfo; + unsigned long flags; + int ret; + + vpfe_pcr_enable(&vpfe->ccdc, 0); + + vpfe_detach_irq(vpfe); + + sdinfo = vpfe->current_subdev; + ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 0); + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + vpfe_dbg(1, vpfe, "stream off failed in subdev\n"); + + /* release all active buffers */ + spin_lock_irqsave(&vpfe->dma_queue_lock, flags); + if (vpfe->cur_frm == vpfe->next_frm) { + vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_ERROR); + } else { + if (vpfe->cur_frm != NULL) + vb2_buffer_done(&vpfe->cur_frm->vb, + VB2_BUF_STATE_ERROR); + if (vpfe->next_frm != NULL) + vb2_buffer_done(&vpfe->next_frm->vb, + VB2_BUF_STATE_ERROR); + } + + while (!list_empty(&vpfe->dma_queue)) { + vpfe->next_frm = list_entry(vpfe->dma_queue.next, + struct vpfe_cap_buffer, list); + list_del(&vpfe->next_frm->list); + vb2_buffer_done(&vpfe->next_frm->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags); +} + +static int vpfe_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + vpfe_dbg(2, vpfe, "vpfe_cropcap\n"); + + if (vpfe->std_index >= ARRAY_SIZE(vpfe_standards)) + return -EINVAL; + + memset(crop, 0, sizeof(struct v4l2_cropcap)); + + crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop->defrect.width = vpfe_standards[vpfe->std_index].width; + crop->bounds.width = crop->defrect.width; + crop->defrect.height = vpfe_standards[vpfe->std_index].height; + crop->bounds.height = crop->defrect.height; + crop->pixelaspect = vpfe_standards[vpfe->std_index].pixelaspect; + + return 0; +} + +static int +vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s) +{ + struct vpfe_device *vpfe = video_drvdata(file); + + switch (s->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = s->r.top = 0; + s->r.width = vpfe->crop.width; + s->r.height = vpfe->crop.height; + break; + + case V4L2_SEL_TGT_CROP: + s->r = vpfe->crop; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + + if (a->left + a->width > b->left + b->width) + return 0; + + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int +vpfe_s_selection(struct file *file, void *fh, struct v4l2_selection *s) +{ + struct vpfe_device *vpfe = video_drvdata(file); + struct v4l2_rect cr = vpfe->crop; + struct v4l2_rect r = s->r; + + /* If streaming is started, return error */ + if (vb2_is_busy(&vpfe->buffer_queue)) { + vpfe_err(vpfe, "%s device busy\n", __func__); + return -EBUSY; + } + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + s->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + v4l_bound_align_image(&r.width, 0, cr.width, 0, + &r.height, 0, cr.height, 0, 0); + + r.left = clamp_t(unsigned int, r.left, 0, cr.width - r.width); + r.top = clamp_t(unsigned int, r.top, 0, cr.height - r.height); + + if (s->flags & V4L2_SEL_FLAG_LE && !enclosed_rectangle(&r, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && !enclosed_rectangle(&s->r, &r)) + return -ERANGE; + + s->r = vpfe->crop = r; + + vpfe_ccdc_set_image_window(&vpfe->ccdc, &r, vpfe->bpp); + vpfe->fmt.fmt.pix.width = r.width; + vpfe->fmt.fmt.pix.height = r.height; + vpfe->fmt.fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc); + vpfe->fmt.fmt.pix.sizeimage = vpfe->fmt.fmt.pix.bytesperline * + vpfe->fmt.fmt.pix.height; + + vpfe_dbg(1, vpfe, "cropped (%d,%d)/%dx%d of %dx%d\n", + r.left, r.top, r.width, r.height, cr.width, cr.height); + + return 0; +} + +static long vpfe_ioctl_default(struct file *file, void *priv, + bool valid_prio, unsigned int cmd, void *param) +{ + struct vpfe_device *vpfe = video_drvdata(file); + int ret; + + vpfe_dbg(2, vpfe, "vpfe_ioctl_default\n"); + + if (!valid_prio) { + vpfe_err(vpfe, "%s device busy\n", __func__); + return -EBUSY; + } + + /* If streaming is started, return error */ + if (vb2_is_busy(&vpfe->buffer_queue)) { + vpfe_err(vpfe, "%s device busy\n", __func__); + return -EBUSY; + } + + switch (cmd) { + case VIDIOC_AM437X_CCDC_CFG: + ret = vpfe_ccdc_set_params(&vpfe->ccdc, param); + if (ret) { + vpfe_dbg(2, vpfe, + "Error setting parameters in CCDC\n"); + return ret; + } + ret = vpfe_get_ccdc_image_format(vpfe, + &vpfe->fmt); + if (ret < 0) { + vpfe_dbg(2, vpfe, + "Invalid image format at CCDC\n"); + return ret; + } + break; + + default: + ret = -ENOTTY; + break; + } + + return ret; +} + +static const struct vb2_ops vpfe_video_qops = { + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .queue_setup = vpfe_queue_setup, + .buf_prepare = vpfe_buffer_prepare, + .buf_queue = vpfe_buffer_queue, + .start_streaming = vpfe_start_streaming, + .stop_streaming = vpfe_stop_streaming, +}; + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +/* vpfe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { + .vidioc_querycap = vpfe_querycap, + .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt, + .vidioc_g_fmt_vid_cap = vpfe_g_fmt, + .vidioc_s_fmt_vid_cap = vpfe_s_fmt, + .vidioc_try_fmt_vid_cap = vpfe_try_fmt, + + .vidioc_enum_framesizes = vpfe_enum_size, + + .vidioc_enum_input = vpfe_enum_input, + .vidioc_g_input = vpfe_g_input, + .vidioc_s_input = vpfe_s_input, + + .vidioc_querystd = vpfe_querystd, + .vidioc_s_std = vpfe_s_std, + .vidioc_g_std = vpfe_g_std, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + + .vidioc_cropcap = vpfe_cropcap, + .vidioc_g_selection = vpfe_g_selection, + .vidioc_s_selection = vpfe_s_selection, + + .vidioc_default = vpfe_ioctl_default, +}; + +static int +vpfe_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct vpfe_device *vpfe = container_of(notifier->v4l2_dev, + struct vpfe_device, v4l2_dev); + struct v4l2_subdev_mbus_code_enum mbus_code; + struct vpfe_subdev_info *sdinfo; + bool found = false; + int i, j; + + vpfe_dbg(1, vpfe, "vpfe_async_bound\n"); + + for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) { + sdinfo = &vpfe->cfg->sub_devs[i]; + + if (!strcmp(sdinfo->name, subdev->name)) { + vpfe->sd[i] = subdev; + vpfe_info(vpfe, + "v4l2 sub device %s registered\n", + subdev->name); + vpfe->sd[i]->grp_id = + sdinfo->grp_id; + /* update tvnorms from the sub devices */ + for (j = 0; j < 1; j++) + vpfe->video_dev->tvnorms |= + sdinfo->inputs[j].std; + + found = true; + break; + } + } + + if (!found) { + vpfe_info(vpfe, "sub device (%s) not matched\n", subdev->name); + return -EINVAL; + } + + /* setup the supported formats & indexes */ + for (j = 0, i = 0; ; ++j) { + struct vpfe_fmt *fmt; + int ret; + + memset(&mbus_code, 0, sizeof(mbus_code)); + mbus_code.index = j; + ret = v4l2_subdev_call(subdev, pad, enum_mbus_code, + NULL, &mbus_code); + if (ret) + break; + + fmt = find_format_by_code(mbus_code.code); + if (!fmt) + continue; + + fmt->supported = true; + fmt->index = i++; + } + + return 0; +} + +static int vpfe_probe_complete(struct vpfe_device *vpfe) +{ + struct video_device *vdev; + struct vb2_queue *q; + int err; + + spin_lock_init(&vpfe->dma_queue_lock); + mutex_init(&vpfe->lock); + + vpfe->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + /* set first sub device as current one */ + vpfe->current_subdev = &vpfe->cfg->sub_devs[0]; + vpfe->v4l2_dev.ctrl_handler = vpfe->sd[0]->ctrl_handler; + + err = vpfe_set_input(vpfe, 0); + if (err) + goto probe_out; + + /* Initialize videobuf2 queue as per the buffer type */ + vpfe->alloc_ctx = vb2_dma_contig_init_ctx(vpfe->pdev); + if (IS_ERR(vpfe->alloc_ctx)) { + vpfe_err(vpfe, "Failed to get the context\n"); + err = PTR_ERR(vpfe->alloc_ctx); + goto probe_out; + } + + q = &vpfe->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; + q->drv_priv = vpfe; + q->ops = &vpfe_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpfe_cap_buffer); + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &vpfe->lock; + q->min_buffers_needed = 1; + + err = vb2_queue_init(q); + if (err) { + vpfe_err(vpfe, "vb2_queue_init() failed\n"); + vb2_dma_contig_cleanup_ctx(vpfe->alloc_ctx); + goto probe_out; + } + + INIT_LIST_HEAD(&vpfe->dma_queue); + + vdev = vpfe->video_dev; + strlcpy(vdev->name, VPFE_MODULE_NAME, sizeof(vdev->name)); + vdev->release = video_device_release; + vdev->fops = &vpfe_fops; + vdev->ioctl_ops = &vpfe_ioctl_ops; + vdev->v4l2_dev = &vpfe->v4l2_dev; + vdev->vfl_dir = VFL_DIR_RX; + vdev->queue = q; + vdev->lock = &vpfe->lock; + video_set_drvdata(vdev, vpfe); + err = video_register_device(vpfe->video_dev, VFL_TYPE_GRABBER, -1); + if (err) { + vpfe_err(vpfe, + "Unable to register video device.\n"); + goto probe_out; + } + + return 0; + +probe_out: + v4l2_device_unregister(&vpfe->v4l2_dev); + return err; +} + +static int vpfe_async_complete(struct v4l2_async_notifier *notifier) +{ + struct vpfe_device *vpfe = container_of(notifier->v4l2_dev, + struct vpfe_device, v4l2_dev); + + return vpfe_probe_complete(vpfe); +} + +static struct vpfe_config * +vpfe_get_pdata(struct platform_device *pdev) +{ + struct device_node *endpoint = NULL, *rem = NULL; + struct v4l2_of_endpoint bus_cfg; + struct vpfe_subdev_info *sdinfo; + struct vpfe_config *pdata; + unsigned int flags; + unsigned int i; + int err; + + dev_dbg(&pdev->dev, "vpfe_get_pdata\n"); + + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) + return pdev->dev.platform_data; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + for (i = 0; ; i++) { + endpoint = of_graph_get_next_endpoint(pdev->dev.of_node, + endpoint); + if (!endpoint) + break; + + sdinfo = &pdata->sub_devs[i]; + sdinfo->grp_id = 0; + + /* we only support camera */ + sdinfo->inputs[0].index = i; + strcpy(sdinfo->inputs[0].name, "Camera"); + sdinfo->inputs[0].type = V4L2_INPUT_TYPE_CAMERA; + sdinfo->inputs[0].std = V4L2_STD_ALL; + sdinfo->inputs[0].capabilities = V4L2_IN_CAP_STD; + + sdinfo->can_route = 0; + sdinfo->routes = NULL; + + of_property_read_u32(endpoint, "ti,am437x-vpfe-interface", + &sdinfo->vpfe_param.if_type); + if (sdinfo->vpfe_param.if_type < 0 || + sdinfo->vpfe_param.if_type > 4) { + sdinfo->vpfe_param.if_type = VPFE_RAW_BAYER; + } + + err = v4l2_of_parse_endpoint(endpoint, &bus_cfg); + if (err) { + dev_err(&pdev->dev, "Could not parse the endpoint\n"); + goto done; + } + + sdinfo->vpfe_param.bus_width = bus_cfg.bus.parallel.bus_width; + + if (sdinfo->vpfe_param.bus_width < 8 || + sdinfo->vpfe_param.bus_width > 16) { + dev_err(&pdev->dev, "Invalid bus width.\n"); + goto done; + } + + flags = bus_cfg.bus.parallel.flags; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + sdinfo->vpfe_param.hdpol = 1; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + sdinfo->vpfe_param.vdpol = 1; + + rem = of_graph_get_remote_port_parent(endpoint); + if (!rem) { + dev_err(&pdev->dev, "Remote device at %s not found\n", + endpoint->full_name); + goto done; + } + + strncpy(sdinfo->name, rem->name, sizeof(sdinfo->name)); + + pdata->asd[i] = devm_kzalloc(&pdev->dev, + sizeof(struct v4l2_async_subdev), + GFP_KERNEL); + pdata->asd[i]->match_type = V4L2_ASYNC_MATCH_OF; + pdata->asd[i]->match.of.node = rem; + of_node_put(endpoint); + of_node_put(rem); + } + + of_node_put(endpoint); + return pdata; + +done: + of_node_put(endpoint); + of_node_put(rem); + return NULL; +} + +/* + * vpfe_probe : This function creates device entries by register + * itself to the V4L2 driver and initializes fields of each + * device objects + */ +static int vpfe_probe(struct platform_device *pdev) +{ + struct vpfe_config *vpfe_cfg = vpfe_get_pdata(pdev); + struct vpfe_device *vpfe; + struct vpfe_ccdc *ccdc; + struct resource *res; + int ret; + + if (!vpfe_cfg) { + dev_err(&pdev->dev, "No platform data\n"); + return -EINVAL; + } + + vpfe = devm_kzalloc(&pdev->dev, sizeof(*vpfe), GFP_KERNEL); + if (!vpfe) + return -ENOMEM; + + vpfe->pdev = &pdev->dev; + vpfe->cfg = vpfe_cfg; + ccdc = &vpfe->ccdc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ccdc->ccdc_cfg.base_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ccdc->ccdc_cfg.base_addr)) + return PTR_ERR(ccdc->ccdc_cfg.base_addr); + + vpfe->irq = platform_get_irq(pdev, 0); + if (vpfe->irq <= 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + return -ENODEV; + } + + ret = devm_request_irq(vpfe->pdev, vpfe->irq, vpfe_isr, 0, + "vpfe_capture0", vpfe); + if (ret) { + dev_err(&pdev->dev, "Unable to request interrupt\n"); + return -EINVAL; + } + + vpfe->video_dev = video_device_alloc(); + if (!vpfe->video_dev) { + dev_err(&pdev->dev, "Unable to allocate video device\n"); + return -ENOMEM; + } + + ret = v4l2_device_register(&pdev->dev, &vpfe->v4l2_dev); + if (ret) { + vpfe_err(vpfe, + "Unable to register v4l2 device.\n"); + goto probe_out_video_release; + } + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpfe); + /* Enabling module functional clock */ + pm_runtime_enable(&pdev->dev); + + /* for now just enable it here instead of waiting for the open */ + pm_runtime_get_sync(&pdev->dev); + + vpfe_ccdc_config_defaults(ccdc); + + pm_runtime_put_sync(&pdev->dev); + + vpfe->sd = devm_kzalloc(&pdev->dev, sizeof(struct v4l2_subdev *) * + ARRAY_SIZE(vpfe->cfg->asd), GFP_KERNEL); + if (!vpfe->sd) { + ret = -ENOMEM; + goto probe_out_v4l2_unregister; + } + + vpfe->notifier.subdevs = vpfe->cfg->asd; + vpfe->notifier.num_subdevs = ARRAY_SIZE(vpfe->cfg->asd); + vpfe->notifier.bound = vpfe_async_bound; + vpfe->notifier.complete = vpfe_async_complete; + ret = v4l2_async_notifier_register(&vpfe->v4l2_dev, + &vpfe->notifier); + if (ret) { + vpfe_err(vpfe, "Error registering async notifier\n"); + ret = -EINVAL; + goto probe_out_v4l2_unregister; + } + + return 0; + +probe_out_v4l2_unregister: + v4l2_device_unregister(&vpfe->v4l2_dev); +probe_out_video_release: + if (!video_is_registered(vpfe->video_dev)) + video_device_release(vpfe->video_dev); + return ret; +} + +/* + * vpfe_remove : It un-register device from V4L2 driver + */ +static int vpfe_remove(struct platform_device *pdev) +{ + struct vpfe_device *vpfe = platform_get_drvdata(pdev); + + vpfe_dbg(2, vpfe, "vpfe_remove\n"); + + pm_runtime_disable(&pdev->dev); + + v4l2_async_notifier_unregister(&vpfe->notifier); + v4l2_device_unregister(&vpfe->v4l2_dev); + video_unregister_device(vpfe->video_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP + +static void vpfe_save_context(struct vpfe_ccdc *ccdc) +{ + ccdc->ccdc_ctx[VPFE_PCR >> 2] = vpfe_reg_read(ccdc, VPFE_PCR); + ccdc->ccdc_ctx[VPFE_SYNMODE >> 2] = vpfe_reg_read(ccdc, VPFE_SYNMODE); + ccdc->ccdc_ctx[VPFE_SDOFST >> 2] = vpfe_reg_read(ccdc, VPFE_SDOFST); + ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2] = vpfe_reg_read(ccdc, VPFE_SDR_ADDR); + ccdc->ccdc_ctx[VPFE_CLAMP >> 2] = vpfe_reg_read(ccdc, VPFE_CLAMP); + ccdc->ccdc_ctx[VPFE_DCSUB >> 2] = vpfe_reg_read(ccdc, VPFE_DCSUB); + ccdc->ccdc_ctx[VPFE_COLPTN >> 2] = vpfe_reg_read(ccdc, VPFE_COLPTN); + ccdc->ccdc_ctx[VPFE_BLKCMP >> 2] = vpfe_reg_read(ccdc, VPFE_BLKCMP); + ccdc->ccdc_ctx[VPFE_VDINT >> 2] = vpfe_reg_read(ccdc, VPFE_VDINT); + ccdc->ccdc_ctx[VPFE_ALAW >> 2] = vpfe_reg_read(ccdc, VPFE_ALAW); + ccdc->ccdc_ctx[VPFE_REC656IF >> 2] = vpfe_reg_read(ccdc, VPFE_REC656IF); + ccdc->ccdc_ctx[VPFE_CCDCFG >> 2] = vpfe_reg_read(ccdc, VPFE_CCDCFG); + ccdc->ccdc_ctx[VPFE_CULLING >> 2] = vpfe_reg_read(ccdc, VPFE_CULLING); + ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2] = vpfe_reg_read(ccdc, + VPFE_HD_VD_WID); + ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2] = vpfe_reg_read(ccdc, + VPFE_PIX_LINES); + ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2] = vpfe_reg_read(ccdc, + VPFE_HORZ_INFO); + ccdc->ccdc_ctx[VPFE_VERT_START >> 2] = vpfe_reg_read(ccdc, + VPFE_VERT_START); + ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2] = vpfe_reg_read(ccdc, + VPFE_VERT_LINES); + ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2] = vpfe_reg_read(ccdc, + VPFE_HSIZE_OFF); +} + +static int vpfe_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpfe_device *vpfe = platform_get_drvdata(pdev); + struct vpfe_ccdc *ccdc = &vpfe->ccdc; + + /* if streaming has not started we don't care */ + if (!vb2_start_streaming_called(&vpfe->buffer_queue)) + return 0; + + pm_runtime_get_sync(dev); + vpfe_config_enable(ccdc, 1); + + /* Save VPFE context */ + vpfe_save_context(ccdc); + + /* Disable CCDC */ + vpfe_pcr_enable(ccdc, 0); + vpfe_config_enable(ccdc, 0); + + /* Disable both master and slave clock */ + pm_runtime_put_sync(dev); + + /* Select sleep pin state */ + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static void vpfe_restore_context(struct vpfe_ccdc *ccdc) +{ + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SYNMODE >> 2], VPFE_SYNMODE); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CULLING >> 2], VPFE_CULLING); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDOFST >> 2], VPFE_SDOFST); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2], VPFE_SDR_ADDR); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CLAMP >> 2], VPFE_CLAMP); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_DCSUB >> 2], VPFE_DCSUB); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_COLPTN >> 2], VPFE_COLPTN); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_BLKCMP >> 2], VPFE_BLKCMP); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VDINT >> 2], VPFE_VDINT); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_ALAW >> 2], VPFE_ALAW); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_REC656IF >> 2], VPFE_REC656IF); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CCDCFG >> 2], VPFE_CCDCFG); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PCR >> 2], VPFE_PCR); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2], + VPFE_HD_VD_WID); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2], + VPFE_PIX_LINES); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2], + VPFE_HORZ_INFO); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_START >> 2], + VPFE_VERT_START); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2], + VPFE_VERT_LINES); + vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2], + VPFE_HSIZE_OFF); +} + +static int vpfe_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpfe_device *vpfe = platform_get_drvdata(pdev); + struct vpfe_ccdc *ccdc = &vpfe->ccdc; + + /* if streaming has not started we don't care */ + if (!vb2_start_streaming_called(&vpfe->buffer_queue)) + return 0; + + /* Enable both master and slave clock */ + pm_runtime_get_sync(dev); + vpfe_config_enable(ccdc, 1); + + /* Restore VPFE context */ + vpfe_restore_context(ccdc); + + vpfe_config_enable(ccdc, 0); + pm_runtime_put_sync(dev); + + /* Select default pin state */ + pinctrl_pm_select_default_state(dev); + + return 0; +} + +#endif + +static SIMPLE_DEV_PM_OPS(vpfe_pm_ops, vpfe_suspend, vpfe_resume); + +static const struct of_device_id vpfe_of_match[] = { + { .compatible = "ti,am437x-vpfe", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, vpfe_of_match); + +static struct platform_driver vpfe_driver = { + .probe = vpfe_probe, + .remove = vpfe_remove, + .driver = { + .name = VPFE_MODULE_NAME, + .owner = THIS_MODULE, + .pm = &vpfe_pm_ops, + .of_match_table = of_match_ptr(vpfe_of_match), + }, +}; + +module_platform_driver(vpfe_driver); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TI AM437x VPFE driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VPFE_VERSION); diff --git a/drivers/media/platform/am437x/am437x-vpfe.h b/drivers/media/platform/am437x/am437x-vpfe.h new file mode 100644 index 0000000..0f55735 --- /dev/null +++ b/drivers/media/platform/am437x/am437x-vpfe.h @@ -0,0 +1,283 @@ +/* + * Copyright (C) 2013 - 2014 Texas Instruments, Inc. + * + * Benoit Parrot <bparrot@xxxxxx> + * Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef AM437X_VPFE_H +#define AM437X_VPFE_H + +#include <linux/am437x-vpfe.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-contig.h> + +#include "am437x-vpfe_regs.h" + +enum vpfe_pin_pol { + VPFE_PINPOL_POSITIVE = 0, + VPFE_PINPOL_NEGATIVE, +}; + +enum vpfe_hw_if_type { + /* Raw Bayer */ + VPFE_RAW_BAYER = 0, + /* BT656 - 8 bit */ + VPFE_BT656, + /* BT656 - 10 bit */ + VPFE_BT656_10BIT, + /* YCbCr - 8 bit with external sync */ + VPFE_YCBCR_SYNC_8, + /* YCbCr - 16 bit with external sync */ + VPFE_YCBCR_SYNC_16, +}; + +/* interface description */ +struct vpfe_hw_if_param { + enum vpfe_hw_if_type if_type; + enum vpfe_pin_pol hdpol; + enum vpfe_pin_pol vdpol; + unsigned int bus_width; +}; + +#define VPFE_MAX_SUBDEV 1 +#define VPFE_MAX_INPUTS 1 + +struct vpfe_pixel_format { + struct v4l2_fmtdesc fmtdesc; + /* bytes per pixel */ + int bpp; +}; + +struct vpfe_std_info { + int active_pixels; + int active_lines; + /* current frame format */ + int frame_format; +}; + +struct vpfe_route { + u32 input; + u32 output; +}; + +struct vpfe_subdev_info { + char name[32]; + /* Sub device group id */ + int grp_id; + /* inputs available at the sub device */ + struct v4l2_input inputs[VPFE_MAX_INPUTS]; + /* Sub dev routing information for each input */ + struct vpfe_route *routes; + /* check if sub dev supports routing */ + int can_route; + /* ccdc bus/interface configuration */ + struct vpfe_hw_if_param vpfe_param; + struct v4l2_subdev *sd; +}; + +struct vpfe_config { + /* information about each subdev */ + struct vpfe_subdev_info sub_devs[VPFE_MAX_SUBDEV]; + /* Flat array, arranged in groups */ + struct v4l2_async_subdev *asd[VPFE_MAX_SUBDEV]; +}; + +struct vpfe_cap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +enum ccdc_pixfmt { + CCDC_PIXFMT_RAW = 0, + CCDC_PIXFMT_YCBCR_16BIT, + CCDC_PIXFMT_YCBCR_8BIT, +}; + +enum ccdc_frmfmt { + CCDC_FRMFMT_PROGRESSIVE = 0, + CCDC_FRMFMT_INTERLACED, +}; + +/* PIXEL ORDER IN MEMORY from LSB to MSB */ +/* only applicable for 8-bit input mode */ +enum ccdc_pixorder { + CCDC_PIXORDER_YCBYCR, + CCDC_PIXORDER_CBYCRY, +}; + +enum ccdc_buftype { + CCDC_BUFTYPE_FLD_INTERLEAVED, + CCDC_BUFTYPE_FLD_SEPARATED +}; + + +/* returns the highest bit used for the gamma */ +static inline u8 ccdc_gamma_width_max_bit(enum vpfe_ccdc_gamma_width width) +{ + return 15 - width; +} + +/* returns the highest bit used for this data size */ +static inline u8 ccdc_data_size_max_bit(enum vpfe_ccdc_data_size sz) +{ + return sz == VPFE_CCDC_DATA_8BITS ? 7 : 15 - sz; +} + +/* Structure for CCDC configuration parameters for raw capture mode */ +struct ccdc_params_raw { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + struct v4l2_rect win; + /* Current Format Bytes Per Pixels */ + unsigned int bytesperpixel; + /* Current Format Bytes per Lines + * (Aligned to 32 bytes) used for HORZ_INFO + */ + unsigned int bytesperline; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; + /* + * enable to store the image in inverse + * order in memory(bottom to top) + */ + unsigned char image_invert_enable; + /* configurable parameters */ + struct vpfe_ccdc_config_params_raw config_params; +}; + +struct ccdc_params_ycbcr { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + struct v4l2_rect win; + /* Current Format Bytes Per Pixels */ + unsigned int bytesperpixel; + /* Current Format Bytes per Lines + * (Aligned to 32 bytes) used for HORZ_INFO + */ + unsigned int bytesperline; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* enable BT.656 embedded sync mode */ + int bt656_enable; + /* cb:y:cr:y or y:cb:y:cr in memory */ + enum ccdc_pixorder pix_order; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; +}; + +/* + * CCDC operational configuration + */ +struct ccdc_config { + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* ccdc base address */ + void __iomem *base_addr; +}; + +struct vpfe_ccdc { + struct ccdc_config ccdc_cfg; + u32 ccdc_ctx[VPFE_REG_END / sizeof(u32)]; +}; + +struct vpfe_device { + /* V4l2 specific parameters */ + /* Identifies video device for this channel */ + struct video_device *video_dev; + /* sub devices */ + struct v4l2_subdev **sd; + /* vpfe cfg */ + struct vpfe_config *cfg; + /* V4l2 device */ + struct v4l2_device v4l2_dev; + /* parent device */ + struct device *pdev; + /* subdevice async Notifier */ + struct v4l2_async_notifier notifier; + /* Indicates id of the field which is being displayed */ + unsigned field; + unsigned sequence; + /* current interface type */ + struct vpfe_hw_if_param vpfe_if_params; + /* ptr to currently selected sub device */ + struct vpfe_subdev_info *current_subdev; + /* current input at the sub device */ + int current_input; + /* Keeps track of the information about the standard */ + struct vpfe_std_info std_info; + /* std index into std table */ + int std_index; + /* IRQs used when CCDC output to SDRAM */ + unsigned int irq; + /* Pointer pointing to current v4l2_buffer */ + struct vpfe_cap_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct vpfe_cap_buffer *next_frm; + /* Used to store pixel format */ + struct v4l2_format fmt; + /* Used to store current bytes per pixel based on current format */ + unsigned int bpp; + /* + * used when IMP is chained to store the crop window which + * is different from the image window + */ + struct v4l2_rect crop; + /* Buffer queue used in video-buf */ + struct vb2_queue buffer_queue; + /* Allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* Queue of filled frames */ + struct list_head dma_queue; + /* IRQ lock for DMA queue */ + spinlock_t dma_queue_lock; + /* lock used to access this structure */ + struct mutex lock; + /* + * offset where second field starts from the starting of the + * buffer for field separated YCbCr formats + */ + u32 field_off; + struct vpfe_ccdc ccdc; +}; + +#endif /* AM437X_VPFE_H */ diff --git a/drivers/media/platform/am437x/am437x-vpfe_regs.h b/drivers/media/platform/am437x/am437x-vpfe_regs.h new file mode 100644 index 0000000..4a0ed29 --- /dev/null +++ b/drivers/media/platform/am437x/am437x-vpfe_regs.h @@ -0,0 +1,140 @@ +/* + * TI AM437x Image Sensor Interface Registers + * + * Copyright (C) 2013 - 2014 Texas Instruments, Inc. + * + * Benoit Parrot <bparrot@xxxxxx> + * Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AM437X_VPFE_REGS_H +#define AM437X_VPFE_REGS_H + +/* VPFE module register offset */ +#define VPFE_REVISION 0x0 +#define VPFE_PCR 0x4 +#define VPFE_SYNMODE 0x8 +#define VPFE_HD_VD_WID 0xc +#define VPFE_PIX_LINES 0x10 +#define VPFE_HORZ_INFO 0x14 +#define VPFE_VERT_START 0x18 +#define VPFE_VERT_LINES 0x1c +#define VPFE_CULLING 0x20 +#define VPFE_HSIZE_OFF 0x24 +#define VPFE_SDOFST 0x28 +#define VPFE_SDR_ADDR 0x2c +#define VPFE_CLAMP 0x30 +#define VPFE_DCSUB 0x34 +#define VPFE_COLPTN 0x38 +#define VPFE_BLKCMP 0x3c +#define VPFE_VDINT 0x48 +#define VPFE_ALAW 0x4c +#define VPFE_REC656IF 0x50 +#define VPFE_CCDCFG 0x54 +#define VPFE_DMA_CNTL 0x98 +#define VPFE_SYSCONFIG 0x104 +#define VPFE_CONFIG 0x108 +#define VPFE_IRQ_EOI 0x110 +#define VPFE_IRQ_STS_RAW 0x114 +#define VPFE_IRQ_STS 0x118 +#define VPFE_IRQ_EN_SET 0x11c +#define VPFE_IRQ_EN_CLR 0x120 +#define VPFE_REG_END 0x124 + +/* Define bit fields within selected registers */ +#define VPFE_FID_POL_MASK 1 +#define VPFE_FID_POL_SHIFT 4 +#define VPFE_HD_POL_MASK 1 +#define VPFE_HD_POL_SHIFT 3 +#define VPFE_VD_POL_MASK 1 +#define VPFE_VD_POL_SHIFT 2 +#define VPFE_HSIZE_OFF_MASK 0xffffffe0 +#define VPFE_32BYTE_ALIGN_VAL 31 +#define VPFE_FRM_FMT_MASK 0x1 +#define VPFE_FRM_FMT_SHIFT 7 +#define VPFE_DATA_SZ_MASK 7 +#define VPFE_DATA_SZ_SHIFT 8 +#define VPFE_PIX_FMT_MASK 3 +#define VPFE_PIX_FMT_SHIFT 12 +#define VPFE_VP2SDR_DISABLE 0xfffbffff +#define VPFE_WEN_ENABLE (1 << 17) +#define VPFE_SDR2RSZ_DISABLE 0xfff7ffff +#define VPFE_VDHDEN_ENABLE (1 << 16) +#define VPFE_LPF_ENABLE (1 << 14) +#define VPFE_ALAW_ENABLE (1 << 3) +#define VPFE_ALAW_GAMMA_WD_MASK 7 +#define VPFE_BLK_CLAMP_ENABLE (1 << 31) +#define VPFE_BLK_SGAIN_MASK 0x1f +#define VPFE_BLK_ST_PXL_MASK 0x7fff +#define VPFE_BLK_ST_PXL_SHIFT 10 +#define VPFE_BLK_SAMPLE_LN_MASK 7 +#define VPFE_BLK_SAMPLE_LN_SHIFT 28 +#define VPFE_BLK_SAMPLE_LINE_MASK 7 +#define VPFE_BLK_SAMPLE_LINE_SHIFT 25 +#define VPFE_BLK_DC_SUB_MASK 0x03fff +#define VPFE_BLK_COMP_MASK 0xff +#define VPFE_BLK_COMP_GB_COMP_SHIFT 8 +#define VPFE_BLK_COMP_GR_COMP_SHIFT 16 +#define VPFE_BLK_COMP_R_COMP_SHIFT 24 +#define VPFE_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define VPFE_DATA_PACK_ENABLE (1 << 11) +#define VPFE_HORZ_INFO_SPH_SHIFT 16 +#define VPFE_VERT_START_SLV0_SHIFT 16 +#define VPFE_VDINT_VDINT0_SHIFT 16 +#define VPFE_VDINT_VDINT1_MASK 0xffff +#define VPFE_PPC_RAW 1 +#define VPFE_DCSUB_DEFAULT_VAL 0 +#define VPFE_CLAMP_DEFAULT_VAL 0 +#define VPFE_COLPTN_VAL 0xbb11bb11 +#define VPFE_TWO_BYTES_PER_PIXEL 2 +#define VPFE_INTERLACED_IMAGE_INVERT 0x4b6d +#define VPFE_INTERLACED_NO_IMAGE_INVERT 0x0249 +#define VPFE_PROGRESSIVE_IMAGE_INVERT 0x4000 +#define VPFE_PROGRESSIVE_NO_IMAGE_INVERT 0 +#define VPFE_INTERLACED_HEIGHT_SHIFT 1 +#define VPFE_SYN_MODE_INPMOD_SHIFT 12 +#define VPFE_SYN_MODE_INPMOD_MASK 3 +#define VPFE_SYN_MODE_8BITS (7 << 8) +#define VPFE_SYN_MODE_10BITS (6 << 8) +#define VPFE_SYN_MODE_11BITS (5 << 8) +#define VPFE_SYN_MODE_12BITS (4 << 8) +#define VPFE_SYN_MODE_13BITS (3 << 8) +#define VPFE_SYN_MODE_14BITS (2 << 8) +#define VPFE_SYN_MODE_15BITS (1 << 8) +#define VPFE_SYN_MODE_16BITS (0 << 8) +#define VPFE_SYN_FLDMODE_MASK 1 +#define VPFE_SYN_FLDMODE_SHIFT 7 +#define VPFE_REC656IF_BT656_EN 3 +#define VPFE_SYN_MODE_VD_POL_NEGATIVE (1 << 2) +#define VPFE_CCDCFG_Y8POS_SHIFT 11 +#define VPFE_CCDCFG_BW656_10BIT (1 << 5) +#define VPFE_SDOFST_FIELD_INTERLEAVED 0x249 +#define VPFE_NO_CULLING 0xffff00ff +#define VPFE_VDINT0 (1 << 0) +#define VPFE_VDINT1 (1 << 1) +#define VPFE_VDINT2 (1 << 2) +#define VPFE_DMA_CNTL_OVERFLOW (1 << 31) + +#define VPFE_CONFIG_PCLK_INV_SHIFT 0 +#define VPFE_CONFIG_PCLK_INV_MASK 1 +#define VPFE_CONFIG_PCLK_INV_NOT_INV 0 +#define VPFE_CONFIG_PCLK_INV_INV 1 +#define VPFE_CONFIG_EN_SHIFT 1 +#define VPFE_CONFIG_EN_MASK 2 +#define VPFE_CONFIG_EN_DISABLE 0 +#define VPFE_CONFIG_EN_ENABLE 1 +#define VPFE_CONFIG_ST_SHIFT 2 +#define VPFE_CONFIG_ST_MASK 4 +#define VPFE_CONFIG_ST_OCP_ACTIVE 0 +#define VPFE_CONFIG_ST_OCP_STANDBY 1 + +#endif /* AM437X_VPFE_REGS_H */ diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index ed39ac8..65495f0 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -34,6 +34,7 @@ header-y += adfs_fs.h header-y += affs_hardblocks.h header-y += agpgart.h header-y += aio_abi.h +header-y += am437x-vpfe.h header-y += apm_bios.h header-y += arcfb.h header-y += atalk.h diff --git a/include/uapi/linux/am437x-vpfe.h b/include/uapi/linux/am437x-vpfe.h new file mode 100644 index 0000000..9b03033f --- /dev/null +++ b/include/uapi/linux/am437x-vpfe.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2013 - 2014 Texas Instruments, Inc. + * + * Benoit Parrot <bparrot@xxxxxx> + * Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef AM437X_VPFE_USER_H +#define AM437X_VPFE_USER_H + +enum vpfe_ccdc_data_size { + VPFE_CCDC_DATA_16BITS = 0, + VPFE_CCDC_DATA_15BITS, + VPFE_CCDC_DATA_14BITS, + VPFE_CCDC_DATA_13BITS, + VPFE_CCDC_DATA_12BITS, + VPFE_CCDC_DATA_11BITS, + VPFE_CCDC_DATA_10BITS, + VPFE_CCDC_DATA_8BITS, +}; + +/* enum for No of pixel per line to be avg. in Black Clamping*/ +enum vpfe_ccdc_sample_length { + VPFE_CCDC_SAMPLE_1PIXELS = 0, + VPFE_CCDC_SAMPLE_2PIXELS, + VPFE_CCDC_SAMPLE_4PIXELS, + VPFE_CCDC_SAMPLE_8PIXELS, + VPFE_CCDC_SAMPLE_16PIXELS, +}; + +/* enum for No of lines in Black Clamping */ +enum vpfe_ccdc_sample_line { + VPFE_CCDC_SAMPLE_1LINES = 0, + VPFE_CCDC_SAMPLE_2LINES, + VPFE_CCDC_SAMPLE_4LINES, + VPFE_CCDC_SAMPLE_8LINES, + VPFE_CCDC_SAMPLE_16LINES, +}; + +/* enum for Alaw gamma width */ +enum vpfe_ccdc_gamma_width { + VPFE_CCDC_GAMMA_BITS_15_6 = 0, /* use bits 15-6 for gamma */ + VPFE_CCDC_GAMMA_BITS_14_5, + VPFE_CCDC_GAMMA_BITS_13_4, + VPFE_CCDC_GAMMA_BITS_12_3, + VPFE_CCDC_GAMMA_BITS_11_2, + VPFE_CCDC_GAMMA_BITS_10_1, + VPFE_CCDC_GAMMA_BITS_09_0, /* use bits 9-0 for gamma */ +}; + +/* structure for ALaw */ +struct vpfe_ccdc_a_law { + /* Enable/disable A-Law */ + unsigned char enable; + /* Gamma Width Input */ + enum vpfe_ccdc_gamma_width gamma_wd; +}; + +/* structure for Black Clamping */ +struct vpfe_ccdc_black_clamp { + unsigned char enable; + /* only if bClampEnable is TRUE */ + enum vpfe_ccdc_sample_length sample_pixel; + /* only if bClampEnable is TRUE */ + enum vpfe_ccdc_sample_line sample_ln; + /* only if bClampEnable is TRUE */ + unsigned short start_pixel; + /* only if bClampEnable is TRUE */ + unsigned short sgain; + /* only if bClampEnable is FALSE */ + unsigned short dc_sub; +}; + +/* structure for Black Level Compensation */ +struct vpfe_ccdc_black_compensation { + /* Constant value to subtract from Red component */ + char r; + /* Constant value to subtract from Gr component */ + char gr; + /* Constant value to subtract from Blue component */ + char b; + /* Constant value to subtract from Gb component */ + char gb; +}; + +/* Structure for CCDC configuration parameters for raw capture mode passed + * by application + */ +struct vpfe_ccdc_config_params_raw { + /* data size value from 8 to 16 bits */ + enum vpfe_ccdc_data_size data_sz; + /* Structure for Optional A-Law */ + struct vpfe_ccdc_a_law alaw; + /* Structure for Optical Black Clamp */ + struct vpfe_ccdc_black_clamp blk_clamp; + /* Structure for Black Compensation */ + struct vpfe_ccdc_black_compensation blk_comp; +}; + +/* + * Private IOCTL + * VIDIOC_AM437X_CCDC_CFG - Set CCDC configuration for raw capture + * This is an experimental ioctl that will change in future kernels. So use + * this ioctl with care ! + **/ +#define VIDIOC_AM437X_CCDC_CFG \ + _IOW('V', BASE_VIDIOC_PRIVATE + 1, void *) + +#endif /* AM437X_VPFE_USER_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-api" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
