On 12/05/2014 10:01 AM, Peter Huewe wrote:
Am Donnerstag, 4. Dezember 2014, 06:55:18 schrieb Jarkko Sakkinen:
From: Will Arthur <will.c.arthur@xxxxxxxxx>
Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
instead of calling tpm_get_timeouts(), assign duration and timeout
values defined in the TPM 2.0 PTP specification.
Signed-off-by: Will Arthur <will.c.arthur@xxxxxxxxx>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
+ sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
+ if ((sts3 & TPM_STS3_TPM2_FAM) == TPM_STS3_TPM2_FAM)
+ chip->flags = TPM_CHIP_FLAG_TPM2;
+
When loading tpm_tis force=1 with my tpm1.2 chip on a machine without bios
integration, it fets detected as a TPM2.0 chip :/
sudo rmmod tpm_tis
# modprobe tpm_tis force=1
modprobe: ERROR: could not insert 'tpm_tis': No such device
# dmesg
[ 263.903828] tpm_tis tpm_tis: 2.0 TPM (device-id 0xB, rev-id 16)
[ 263.948049] tpm_tis tpm_tis: A TPM error (10) occurred continue selftest
[ 263.948120] tpm_tis tpm_tis: TPM self test failed
sts3 is reported as 0xff from my TPM1.2
Hmm,
my TPM2.0 chip also reports sts3 as 0xff (when loading with force=1 on a
machine without bios integration)
[ 307.095344] sts3 ff
[ 307.095366] tpm_tis tpm_tis: 2.0 TPM (device-id 0x1A, rev-id 16)
[ 307.140047] tpm_tis tpm_tis: A TPM error (256) occurred continue selftest
[ 307.140056] tpm_tis tpm_tis: TPM self test failed
You are reading "sts3" - before requesting the locality and thus it returns 0xff for a TPM20 chip as well.
--> You have to have an active locality first.
For a TPM2.0 0xFF is not a valid value (if active locality is set), since reading commandCancel and resetEstablishment bit always return 0 on reads (according to spec).
--> 0xFF should be treated as a TPM1.2 (older tpms with TIS 1.2)
--> 0x04 should be treated as TPM 2.0
--> 0x08 should be treated as TPM1.2 (newer tpms with TIS1.3 enhanced)
+ sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
+ if ((sts3 & TPM_STS3_TPM2_FAM) == TPM_STS3_TPM2_FAM)
+ chip->flags = TPM_CHIP_FLAG_TPM2;
#define TPM_STS3_TPM2_FAM_MASK = 0x0c
then:
if ((sts3 & TPM_STS3_TPM2_FAM_MASK) == TPM_STS3_TPM2_FAM) ...
[see my previous review on this]
Stefan
Thanks,
Peter
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
_______________________________________________
tpmdd-devel mailing list
tpmdd-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
