Hi, Alan,
Thanks for your comments!
Some question for them below,
On 2014年11月26日 20:33, One Thousand Gnomes wrote:
+ 213 = /dev/ttySPX0 SPRD serial port 0
+ ...
+ 216 = /dev/ttySPX3 SPRD serial port 3
Please use dynamic allocation or give a very very good reason why you
can't
do we just leave the .major & .minor as NULL in struct uart_driver for
dynamic allocation?
+config SERIAL_SPRD_NR
+ int "Maximum number of sprd serial ports"
+ depends on SERIAL_SPRD
+ default "4"
If you are doing dynamic allocation this should pretty much go away
I think you mean getting the number of uarts from dt and dynamically
allocate their port structure?
+static int sprd_startup(struct uart_port *port)
+{
+ int ret = 0;
+ unsigned int ien, ctrl1;
+ struct sprd_uart_port *sp;
+
+ serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
+
+ /* clear rx fifo */
+ while (serial_in(port, SPRD_STS1) & 0x00ff)
+ serial_in(port, SPRD_RXD);
+
+ /* clear tx fifo */
+ while (serial_in(port, SPRD_STS1) & 0xff00)
+ ;
Missing a cpu_relax and I would have thought a timeout on both of these.
We will add in V4
+static void sprd_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud, quot;
+ /* calculate parity */
+ lcr &= ~SPRD_LCR_PARITY;
+ if (termios->c_cflag & PARENB) {
+ lcr |= SPRD_LCR_PARITY_EN;
+ if (termios->c_cflag & PARODD)
+ lcr |= SPRD_LCR_ODD_PAR;
+ else
+ lcr |= SPRD_LCR_EVEN_PAR;
+ }
If you don't support mark/space parity then also clear CMSPAR in
termios->c_cflag.
just simply use code like "termios->c_cflag &= ~CMSPAR" ?
If you do then it ought to be handled above.
+
+ /* clock divider bit16~bit20 */
+ serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
+ serial_out(port, SPRD_LCR, lcr);
+ fc |= 0x3e00 | THLD_RX_FULL;
+ serial_out(port, SPRD_CTL1, fc);
Also set the resulting baud back into the termios (see the 8250 termios
for an example)
you mean something like this part ?
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
+static int __init sprd_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (unlikely(co->index >= UART_NR_MAX || co->index < 0))
+ co->index = 0;
+
+ port = (struct uart_port *)sprd_port[co->index];
+ if (port == NULL) {
+ pr_info("srial port %d not yet initialized\n", co->index);
Typo
it will be fixed :)
Thanks,
Orson
Looks basically sound to me
Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
