On Mon, 24 Nov 2014, Khalid Aziz wrote:
> sched/fair: Add advisory flag for borrowing a timeslice
>
> This patch adds a way for a task to request to borrow one timeslice
> from future if it is about to be preempted, so it could delay
> preemption and complete any critical task it is in the middle of.
>
> This feature helps with performance on databases and has been
> used for many years on other OSs by the databases. This feature
> helps in situation where a task acquires a lock before performing a
> critical operation on the database and happens to get preempted before
> it completes its task. This lock being held causes all other tasks
> that also acquire the same lock to perform their critical operation
> on the database, to start queueing up and causing large number of
> context switches. This queueing problem can be avoided if the task
> that acquires lock first could request scheduler to let it borrow one
> timeslice once it enters its critical section and hence allow it to
> complete its critical section without causing queueing problem. If
While you are niftily avoiding to talk about the nature of the lock, I
can take it for granted that you are talking about user space
spinlocks, right?
Simply if you would talk about futexes and pthread_mutexes then it
would have occured to you while implementing that feature, that the
kernel already has a mechanism to record a reference to a user space
data structure (robust_list_head) which is updated when a futex is
acquired in user space, i.e. when a critical section is entered. It's
not the same as you need, but it would be relatively simple to convey
that information there.
So what are the actual lock types and use cases and why can't you
combine that with the existing robust list mechanism?
> critical section completes before the task is due for preemption,
> the task can simply desassert its request. A task sends the
And that deassertion has which consequences before the next preempt
check happens?
> +config SCHED_PREEMPT_DELAY
> + def_bool n
> + prompt "Scheduler preemption delay support"
> + depends on PROC_FS
Why so?
> @@ -1324,6 +1325,13 @@ struct task_struct {
> /* Revert to default priority/policy when forking */
> unsigned sched_reset_on_fork:1;
> unsigned sched_contributes_to_load:1;
> +#ifdef CONFIG_SCHED_PREEMPT_DELAY
> + struct preempt_delay {
> + u32 __user *delay_req; /* delay request flag pointer */
> + unsigned char delay_granted; /* currently in delay */
> + unsigned char yield_penalty; /* failure to yield penalty */
> + } sched_preempt_delay;
No. First of all this wants to be a proper struct declaration outside
of task_struct.
Aside of that your user space side is actually a structure and not a
opaque u32 pointer, so this should be an explicit data type and not
something randomly defined in the guts of task_struct.
> +#if defined(CONFIG_SCHED_PREEMPT_DELAY) && defined(CONFIG_PROC_FS)
> +extern void sched_preempt_delay_show(struct seq_file *m,
> + struct task_struct *task);
> +extern void sched_preempt_delay_set(struct task_struct *task,
> + unsigned char *val);
> +#endif
Can you please get rid of the leftovers of your previous patches
yourself and before posting? It's annoying as hell to review patches
which contain stale code.
> diff --git a/kernel/fork.c b/kernel/fork.c
> index 9b7d746..7f0d843 100644
> --- a/kernel/fork.c
> +++ b/kernel/fork.c
> @@ -1671,6 +1671,11 @@ long do_fork(unsigned long clone_flags,
> init_completion(&vfork);
> get_task_struct(p);
> }
> +#ifdef CONFIG_SCHED_PREEMPT_DELAY
> + p->sched_preempt_delay.delay_req = NULL;
> + p->sched_preempt_delay.delay_granted = 0;
> + p->sched_preempt_delay.yield_penalty = 0;
> +#endif
Sigh. We do not sprinkle that kind of #ifdef crap all over the
place. That's what inline functions in header files are for.
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 240157c..38cb515 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -4230,6 +4230,14 @@ SYSCALL_DEFINE0(sched_yield)
> {
> struct rq *rq = this_rq_lock();
>
> +#ifdef CONFIG_SCHED_PREEMPT_DELAY
> + /*
> + * Clear the penalty flag for current task to reward it for
> + * palying by the rules
Looking at that mess makes me palying^Wpale.
> + */
> + current->sched_preempt_delay.yield_penalty = 0;
> +#endif
> +
> schedstat_inc(rq, yld_count);
> current->sched_class->yield_task(rq);
> +#ifdef CONFIG_SCHED_PREEMPT_DELAY
> +/*
> + * delay_resched_rq(): Check if the task about to be preempted has
> + * requested an additional time slice. If it has, grant it additional
> + * timeslice once.
> + */
> +static void
> +delay_resched_rq(struct rq *rq)
> +{
> + struct task_struct *curr = rq->curr;
> + struct sched_entity *se;
> + int cpu = task_cpu(curr);
> + u32 __user *delay_req;
> + unsigned int delay_req_flag;
> + unsigned char *delay_flag;
> +
> + /*
> + * Check if task is using pre-emption delay feature. If address
> + * for preemption delay request flag is not set, this task is
> + * not using preemption delay feature, we can reschedule without
> + * any delay
So what happens if:
kernel.preempt_delay_available = 1;
prctl(PR_SET_PREEMPT_DELAY, ...);
kernel.preempt_delay_available = 0;
Nothing happens at all because you fail to give the sysop control over
the feature once you unleashed it.
The proper solution for this is to use a static key to control the
feature itself. That also reduces the overhead for those who are not
interested in that.
> + */
> + delay_req = curr->sched_preempt_delay.delay_req;
> +
> + if ((delay_req == NULL) || (cpu != smp_processor_id()))
check_preempt_tick() clearly does not care about that, but you inflict
a smp_processor_id() on every caller. I can see that you really care
about performance.
> + goto resched_now;
> +
> + /*
> + * Pre-emption delay will be granted only once. If this task
> + * has already been granted delay, rechedule now
> + */
> + if (curr->sched_preempt_delay.delay_granted) {
> + curr->sched_preempt_delay.delay_granted = 0;
> + goto resched_now;
> + }
> + /*
> + * Get the value of preemption delay request flag from userspace.
> + * Task had already passed us the address where the flag is stored
> + * in userspace earlier. This flag is just like the PROCESS_PRIVATE
> + * futex, leverage the futex code here to read the flag. If there
> + * is a page fault accessing this flag in userspace, that means
> + * userspace has not touched this flag recently and we can
> + * assume no preemption delay is needed.
> + *
> + * If task is not requesting additional timeslice, resched now
> + */
> + if (delay_req) {
Surely we need to recheck delay_req here.
> + int ret;
> +
> + pagefault_disable();
> + ret = __copy_from_user_inatomic(&delay_req_flag, delay_req,
> + sizeof(u32));
> + pagefault_enable();
> + delay_flag = &delay_req_flag;
> + if (ret || !delay_flag[0])
This is really a well designed kernel/user space interface. NOT.
> + goto resched_now;
> + } else {
> + goto resched_now;
> + }
> +
> + /*
> + * Current thread has requested preemption delay and has not
> + * been granted an extension yet. If this thread failed to yield
> + * processor after being granted amnesty last time, penalize it
> + * by not granting this delay request, otherwise give it an extra
> + * timeslice.
> + */
> + if (curr->sched_preempt_delay.yield_penalty) {
> + curr->sched_preempt_delay.yield_penalty = 0;
> + goto resched_now;
> + }
> +
> + se = &curr->se;
> + curr->sched_preempt_delay.delay_granted = 1;
> + /*
> + * Set the penalty flag for failing to yield the processor after
> + * being granted immunity. This flag will be cleared in
> + * sched_yield() if the thread indeed calls sched_yield
> + */
> + curr->sched_preempt_delay.yield_penalty = 1;
Why on earth do we need two flags here? Just because we can create
more code in the guts of the scheduler hot pathes that way?
And surely we want to put them into two adjacent u8 to make life
easier for all architectures.
> + /*
> + * Let the thread know it got amnesty and it should call
> + * sched_yield() when it is done to avoid penalty next time
> + * it wants amnesty. We need to write to userspace location.
> + * Since we just read from this location, chances are extremley
> + * low we might page fault. If we do page fault, we will ignore
> + * it and accept the cost of failed write in form of unnecessary
> + * penalty for userspace task for not yielding processor.
This is the completely wrong argument. We know that the task was
asking for an extra time slice because the copy from user above
succeeded. So we are better of to let the task actually handle its
pagefault than scheduling it out.
> + * This is a highly unlikely scenario.
> + */
> + delay_flag[0] = 0;
> + delay_flag[1] = 1;
Sigh.
> +#ifdef CONFIG_SCHED_PREEMPT_DELAY
And all of this needs to be in kernel/sys.c just because...
> +int sysctl_preempt_delay_available;
> +
> +static int
> +preempt_delay_write(struct task_struct *task, unsigned long preempt_delay_addr)
> +{
> + /*
> + * Do not allow write if pointer is currently set
> + */
> + if (task->sched_preempt_delay.delay_req &&
> + ((void *)preempt_delay_addr != NULL))
> + return -EINVAL;
> + /*
> + * Validate the pointer. It should be aligned to 4-byte boundary.
So 4 bytes is a perfect boundary for everyone, right? Pulled that
number out of thin air or what?
> + */
> + if (unlikely(!IS_ALIGNED(preempt_delay_addr, 4)))
> + return -EFAULT;
> + if (unlikely(!access_ok(rw, preempt_delay_addr, sizeof(u32))))
> + return -EFAULT;
> +
> + task->sched_preempt_delay.delay_req = (u32 __user *) preempt_delay_addr;
> +
> + /* zero out flags */
Brilliant comment. I can see what the code is doing. What's way more
interesting and of course undocumented is why you are ignoring the
return value of put_user() ..
> + put_user(0, (uint32_t *)preempt_delay_addr);
Aside of the general issues I have with this (see the inline replies
to your changelog) the overall impression of this patch is that it is
a half baken and carelessly cobbled together extract of some data base
specific kernel hackery, which I prefer not to see at all.
Thanks,
tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
