Re: [PATCH 3/5] drm: add bus_formats and nbus_formats fields to drm_display_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thierry,

On Tue, 23 Sep 2014 16:04:40 +0200
Thierry Reding <thierry.reding@xxxxxxxxx> wrote:

> On Tue, Jul 22, 2014 at 02:23:45PM +0200, Boris BREZILLON wrote:
> > Add bus_formats and nbus_formats fields and
> > drm_display_info_set_bus_formats helper function to specify the bus
> > formats supported by a given display.
> > 
> > This information can be used by display controller drivers to configure
> > the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
> > RGB or LVDS busses).
> > 
> > Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/drm_crtc.c | 28 ++++++++++++++++++++++++++++
> >  include/drm/drm_crtc.h     |  8 ++++++++
> >  2 files changed, 36 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > index c808a09..50c8395 100644
> > --- a/drivers/gpu/drm/drm_crtc.c
> > +++ b/drivers/gpu/drm/drm_crtc.c
> > @@ -825,6 +825,34 @@ static void drm_mode_remove(struct drm_connector *connector,
> >  	drm_mode_destroy(connector->dev, mode);
> >  }
> >  
> > +/*
> > + * drm_display_info_set_bus_formats - set the supported bus formats
> > + * @info: display info to store bus formats in
> > + * @fmts: array containing the supported bus formats
> > + * @nfmts: the number of entries in the fmts array
> > + *
> > + * Store the suppported bus formats in display info structure.
> > + */
> > +int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > +				     const enum video_bus_format *fmts,
> > +				     int nfmts)
> 
> Can you make nfmts unsigned please?


Sure.

> 
> > +{
> > +	enum video_bus_format *formats = NULL;
> > +
> > +	if (fmts && nfmts) {
> > +		formats = kmemdup(fmts, sizeof(*fmts) * nfmts, GFP_KERNEL);
> > +		if (!formats)
> > +			return -ENOMEM;
> > +	}
> > +
> > +	kfree(info->bus_formats);
> > +	info->bus_formats = formats;
> > +	info->nbus_formats = formats ? nfmts : 0;
> 
> And perhaps check for formats == NULL && nfmts != 0 since that's not a
> valid pair of values. Then you can simply assign this directly without
> relying on the value of formats.
> 
> Also other variable names use "num_" as a prefix instead of "n", so if
> you're going to respin anyway might as well make the names more
> consistent.

I'll rename the field and variable and add the proper check before
assigning values.

Thanks for your review.

Best Regards,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux