On Monday 22 September 2014 18:48:54 Mark yao wrote:
> diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
> new file mode 100644
> index 0000000..7146c80
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -0,0 +1,19 @@
> +config DRM_ROCKCHIP
> + tristate "DRM Support for Rockchip"
> + depends on DRM && ROCKCHIP_IOMMU
> + select ARM_DMA_USE_IOMMU
> + select IOMMU_API
> + select DRM_KMS_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_PANEL
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
> + select VIDEOMODE_HELPERS
Be careful with 'select', at least some of these should be 'depends on'.
In particular IOMMU_API and ARM_DMA_USE_IOMMU, but possibly others
as well. Just check how the symbols are used normally, if you get this
wrong, we can end up with incorrect dependencies or loops.
> diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
> new file mode 100644
> index 0000000..6e6d468
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/Makefile
> @@ -0,0 +1,10 @@
> +#
> +# Makefile for the drm device driver. This driver provides support for the
> +# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
> +
> +ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/rockchip
The second one should not be required.
> +static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
> +{
> + struct rockchip_drm_private *private;
> + struct dma_iommu_mapping *mapping;
> + struct device *dev = drm_dev->dev;
> + int ret;
> +
> + private = devm_kzalloc(drm_dev->dev, sizeof(*private), GFP_KERNEL);
> + if (!private)
> + return -ENOMEM;
> +
> + dev_set_drvdata(drm_dev->dev, dev);
> + drm_dev->dev_private = private;
> +
> + drm_mode_config_init(drm_dev);
> +
> + rockchip_drm_mode_config_init(drm_dev);
> +
> + dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
> + GFP_KERNEL);
> + if (!dev->dma_parms) {
> + ret = -ENOMEM;
> + goto err_config_cleanup;
> + }
> +
> + /* TODO(djkurtz): fetch the mapping start/size from somewhere */
> + mapping = arm_iommu_create_mapping(&platform_bus_type, 0x10000000,
> + SZ_1G);
> + if (IS_ERR(mapping)) {
> + ret = PTR_ERR(mapping);
> + goto err_config_cleanup;
> + }
> +
> + dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
This is the default coherent mask. If you call this function, you
should normally check the return value, or call dma_set_mask first,
which you apparently don't do here, and in another place in this
patch.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
