add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register.
All previous instructions were 8-byte. This is first 16-byte instruction.
Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction:
insn[0].code = BPF_LD | BPF_DW | BPF_IMM
insn[0].dst_reg = destination register
insn[0].imm = lower 32-bit
insn[1].code = 0
insn[1].imm = upper 32-bit
All unused fields must be zero.
Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM
which loads 32-bit immediate value into a register.
x64 JITs it as single 'movabsq %rax, imm64'
arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn
Note that old eBPF programs are binary compatible with new interpreter.
In the following patches this instruction is used to store eBPF map pointers:
BPF_LD_IMM64(R1, const_imm_map_ptr)
BPF_CALL(BPF_FUNC_map_lookup_elem)
and verifier is introduced to check validity of the programs.
Later LLVM compiler is using this insn as generic load of 64-bit immediate
constant and as a load of map pointer with relocation.
Signed-off-by: Alexei Starovoitov <ast@xxxxxxxxxxxx>
---
Documentation/networking/filter.txt | 8 +++++++-
arch/x86/net/bpf_jit_comp.c | 17 +++++++++++++++++
include/linux/filter.h | 18 ++++++++++++++++++
kernel/bpf/core.c | 5 +++++
lib/test_bpf.c | 21 +++++++++++++++++++++
5 files changed, 68 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index c48a9704bda8..81916ab5d96f 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -951,7 +951,7 @@ Size modifier is one of ...
Mode modifier is one of:
- BPF_IMM 0x00 /* classic BPF only, reserved in eBPF */
+ BPF_IMM 0x00 /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
BPF_ABS 0x20
BPF_IND 0x40
BPF_MEM 0x60
@@ -995,6 +995,12 @@ BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
2 byte atomic increments are not supported.
+eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists
+of two consecutive 'struct bpf_insn' 8-byte blocks and interpreted as single
+instruction that loads 64-bit immediate value into a dst_reg.
+Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads
+32-bit immediate value into a register.
+
Testing
-------
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index b08a98c59530..98837147ee57 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -393,6 +393,23 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
break;
+ case BPF_LD | BPF_IMM | BPF_DW:
+ if (insn[1].code != 0 || insn[1].src_reg != 0 ||
+ insn[1].dst_reg != 0 || insn[1].off != 0) {
+ /* verifier must catch invalid insns */
+ pr_err("invalid BPF_LD_IMM64 insn\n");
+ return -EINVAL;
+ }
+
+ /* movabsq %rax, imm64 */
+ EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
+ EMIT(insn[0].imm, 4);
+ EMIT(insn[1].imm, 4);
+
+ insn++;
+ i++;
+ break;
+
/* dst %= src, dst /= src, dst %= imm32, dst /= imm32 */
case BPF_ALU | BPF_MOD | BPF_X:
case BPF_ALU | BPF_DIV | BPF_X:
diff --git a/include/linux/filter.h b/include/linux/filter.h
index a5227ab8ccb1..f3262b598262 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -161,6 +161,24 @@ enum {
.off = 0, \
.imm = IMM })
+/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
+#define BPF_LD_IMM64(DST, IMM) \
+ BPF_LD_IMM64_RAW(DST, 0, IMM)
+
+#define BPF_LD_IMM64_RAW(DST, SRC, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_LD | BPF_DW | BPF_IMM, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = (__u32) (IMM) }), \
+ ((struct bpf_insn) { \
+ .code = 0, /* zero is reserved opcode */ \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = ((__u64) (IMM)) >> 32 })
+
/* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
#define BPF_MOV64_RAW(TYPE, DST, SRC, IMM) \
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 7f0dbcbb34af..0434c2170f2b 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -180,6 +180,7 @@ static unsigned int __bpf_prog_run(void *ctx, const struct bpf_insn *insn)
[BPF_LD | BPF_IND | BPF_W] = &&LD_IND_W,
[BPF_LD | BPF_IND | BPF_H] = &&LD_IND_H,
[BPF_LD | BPF_IND | BPF_B] = &&LD_IND_B,
+ [BPF_LD | BPF_IMM | BPF_DW] = &&LD_IMM_DW,
};
void *ptr;
int off;
@@ -239,6 +240,10 @@ select_insn:
ALU64_MOV_K:
DST = IMM;
CONT;
+ LD_IMM_DW:
+ DST = (u64) (u32) insn[0].imm | ((u64) (u32) insn[1].imm) << 32;
+ insn++;
+ CONT;
ALU64_ARSH_X:
(*(s64 *) &DST) >>= SRC;
CONT;
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 8c66c6aace04..46ab1a7ef135 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -1735,6 +1735,27 @@ static struct bpf_test tests[] = {
{ },
{ { 1, 0 } },
},
+ {
+ "load 64-bit immediate",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x567800001234L),
+ BPF_MOV64_REG(R2, R1),
+ BPF_MOV64_REG(R3, R2),
+ BPF_ALU64_IMM(BPF_RSH, R2, 32),
+ BPF_ALU64_IMM(BPF_LSH, R3, 32),
+ BPF_ALU64_IMM(BPF_RSH, R3, 32),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_JMP_IMM(BPF_JEQ, R2, 0x5678, 1),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JEQ, R3, 0x1234, 1),
+ BPF_EXIT_INSN(),
+ BPF_ALU64_IMM(BPF_MOV, R0, 1),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 1 } }
+ },
};
static struct net_device dev;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
