On Mon, 3 Jun 2024, Linus Torvalds wrote: > > Anyway, back to my point. A feasible solution non-intrusive for Linux > > and low-overhead for GCC has been found. I can expedite implementation > > and I'll see if I can regression-test it too, but I may have to rely on > > other people to complete it after all, as I haven't been prepared for this > > effort in the light of certain issues I have recently suffered from in my > > lab. > > Yeah, if compiler support makes us not have to care, then I don't > think the difference between pre-BWX and BWX is going to matter much > for the kernel. > > The real pain with alpha has been that it's special enough that it > affects non-alpha code, and BWX was one big piece of that. Understood, that's burden beyond justification for an obsolete legacy platform. > That said, some of the EV4 misfeatures end up being a huge pain inside > the alpha code either because of the horrible hoops that the IO > accessors have to jump through, or because of the broken ASID's. > > So even with enw compiler support, maybe it's worth trying to > re-introduce any support for older cpu's incrementally. Ack. > For example, the ASID hw issue is _claimed_ to have been fixed in > PALcode, and maybe the games we played for ev4-era cpus aren't > actually needed any more? Actually my system seems to be an odd relic that has very old PALcode: [...] X3.7-10895, built on Sep 15 1994 at 10:19:05 >>>sh conf SRM Console X3.7-10895 VMS PALcode X5.48-60, OSF PALcode X1.35-42 [...] -- which is dated well before the system's release date. It has been heavily patched with extra components retrofitted on the PCB as if an early hardware revision and the part number labelled on the PCB it's an AlphaStation 250 and yet it came packaged as AlphaServer 300 (the only documented difference between the PCBs of the two systems is the maximum amount of DRAM supported), with a vast mismatch between the dates given on the PCB and the case. I don't know what's the story behind it, maybe it once was a DEC engineering machine. And for instance its SRM cannot netboot over BOOTP/TFTP, it can only use MOP. Not an issue for me, and I feel a bit uneasy about upgrading the firmware, I'd rather I didn't brick the machine. I guess we shall see whether it matters and if so, then what can be done about it. I used an AlphaServer 300 before that was purchased brand new and I can't recall any such patching on the PCB, and I reckon SRM was more modern too. Indeed having checked old logs I found: [...] version X6.2-165 Nov 4 1996 10:06:10 >>>sh conf Firmware SRM Console: X6.2-165 ARC Console: 4.49 PALcode: VMS PALcode V5.56-2, OSF PALcode X1.46-2 [...] > And the various odd IO platforms should only be re-introduced when > there are people who actually have access to the relevant hardware and > will test. Absolutely, what's the point of keeping something we have no way to verify? I'll begin with what I'm interested in myself and will gather input from people willing to verify stuff with other hardware they may have. Anyway, it's been a hectic month for me and I have my Alpha machine in the remote lab fully ready for this effort now, with a number of issues fixed, most importantly rather tricky GCC PR rtl-optimization/115565, <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=115565> which prevented the userland from being used as installed. With that in place the system was able to complete GCC 15 verification, so now it should be able to do pretty much anything. I ran some glibc upstream master testing too. With that ticked off I do hope to work on the GCC part throughout July, and then the kernel bits will follow. Maciej
