Re: [PATCH net-next v12 10/13] tcp: RX path for devmem TCP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/13/24 02:35, Mina Almasry wrote:
In tcp_recvmsg_locked(), detect if the skb being received by the user
is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM
flag - pass it to tcp_recvmsg_devmem() for custom handling.

tcp_recvmsg_devmem() copies any data in the skb header to the linear
buffer, and returns a cmsg to the user indicating the number of bytes
returned in the linear buffer.

tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags,
and returns to the user a cmsg_devmem indicating the location of the
data in the dmabuf device memory. cmsg_devmem contains this information:

1. the offset into the dmabuf where the payload starts. 'frag_offset'.
2. the size of the frag. 'frag_size'.
3. an opaque token 'frag_token' to return to the kernel when the buffer
is to be released.

The pages awaiting freeing are stored in the newly added
sk->sk_user_frags, and each page passed to userspace is get_page()'d.
This reference is dropped once the userspace indicates that it is
done reading this page.  All pages are released when the socket is
destroyed.

One small concern is that if the pool gets destroyed (i.e.
page_pool_destroy) before sockets holding netiov, page pool will
semi-busily poll until the sockets die or such and will spam with
pr_warn(). E.g. when a user drops the nl but leaks data sockets
and continues with its userspace business. You can probably do
it in a loop and create dozens of such pending
page_pool_release_retry().


Signed-off-by: Willem de Bruijn <willemb@xxxxxxxxxx>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@xxxxxxxxxx>
Signed-off-by: Mina Almasry <almasrymina@xxxxxxxxxx>

...
+static int tcp_xa_pool_refill(struct sock *sk, struct tcp_xa_pool *p,
+			      unsigned int max_frags)
+{
+	int err, k;
+
+	if (p->idx < p->max)
+		return 0;
+
+	xa_lock_bh(&sk->sk_user_frags);
+
+	tcp_xa_pool_commit_locked(sk, p);
+
+	for (k = 0; k < max_frags; k++) {
+		err = __xa_alloc(&sk->sk_user_frags, &p->tokens[k],
+				 XA_ZERO_ENTRY, xa_limit_31b, GFP_KERNEL);
+		if (err)
+			break;
+	}
+
+	xa_unlock_bh(&sk->sk_user_frags);
+
+	p->max = k;
+	p->idx = 0;
+	return k ? 0 : err;
+}

Personally, I'd prefer this optimisation to be in a separate patch,
especially since there is some degree of hackiness to it.


+
+/* On error, returns the -errno. On success, returns number of bytes sent to the
+ * user. May not consume all of @remaining_len.
+ */
+static int tcp_recvmsg_dmabuf(struct sock *sk, const struct sk_buff *skb,
+			      unsigned int offset, struct msghdr *msg,
+			      int remaining_len)
+{
+	struct dmabuf_cmsg dmabuf_cmsg = { 0 };
+	struct tcp_xa_pool tcp_xa_pool;
+	unsigned int start;
+	int i, copy, n;
+	int sent = 0;
+	int err = 0;
+
+	tcp_xa_pool.max = 0;
+	tcp_xa_pool.idx = 0;
+	do {
+		start = skb_headlen(skb);
+
+		if (skb_frags_readable(skb)) {
+			err = -ENODEV;
+			goto out;
+		}
+
+		/* Copy header. */
+		copy = start - offset;
+		if (copy > 0) {
+			copy = min(copy, remaining_len);
+
+			n = copy_to_iter(skb->data + offset, copy,
+					 &msg->msg_iter);
+			if (n != copy) {
+				err = -EFAULT;
+				goto out;
+			}
+
+			offset += copy;
+			remaining_len -= copy;
+
+			/* First a dmabuf_cmsg for # bytes copied to user
+			 * buffer.
+			 */
+			memset(&dmabuf_cmsg, 0, sizeof(dmabuf_cmsg));
+			dmabuf_cmsg.frag_size = copy;
+			err = put_cmsg(msg, SOL_SOCKET, SO_DEVMEM_LINEAR,
+				       sizeof(dmabuf_cmsg), &dmabuf_cmsg);
+			if (err || msg->msg_flags & MSG_CTRUNC) {
+				msg->msg_flags &= ~MSG_CTRUNC;
+				if (!err)
+					err = -ETOOSMALL;
+				goto out;
+			}
+
+			sent += copy;
+
+			if (remaining_len == 0)
+				goto out;
+		}
+
+		/* after that, send information of dmabuf pages through a
+		 * sequence of cmsg
+		 */
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct net_iov *niov;
+			u64 frag_offset;
+			int end;
+
+			/* !skb_frags_readable() should indicate that ALL the
+			 * frags in this skb are dmabuf net_iovs. We're checking
+			 * for that flag above, but also check individual frags
+			 * here. If the tcp stack is not setting
+			 * skb_frags_readable() correctly, we still don't want
+			 * to crash here.
+			 */
+			if (!skb_frag_net_iov(frag)) {
+				net_err_ratelimited("Found non-dmabuf skb with net_iov");
+				err = -ENODEV;
+				goto out;
+			}
+
+			niov = skb_frag_net_iov(frag);
+			end = start + skb_frag_size(frag);
+			copy = end - offset;
+
+			if (copy > 0) {
+				copy = min(copy, remaining_len);
+
+				frag_offset = net_iov_virtual_addr(niov) +
+					      skb_frag_off(frag) + offset -
+					      start;
+				dmabuf_cmsg.frag_offset = frag_offset;
+				dmabuf_cmsg.frag_size = copy;
+				err = tcp_xa_pool_refill(sk, &tcp_xa_pool,
+							 skb_shinfo(skb)->nr_frags - i);
+				if (err)
+					goto out;
+
+				/* Will perform the exchange later */
+				dmabuf_cmsg.frag_token = tcp_xa_pool.tokens[tcp_xa_pool.idx];
+				dmabuf_cmsg.dmabuf_id = net_iov_binding_id(niov);
+
+				offset += copy;
+				remaining_len -= copy;
+
+				err = put_cmsg(msg, SOL_SOCKET,
+					       SO_DEVMEM_DMABUF,
+					       sizeof(dmabuf_cmsg),
+					       &dmabuf_cmsg);
+				if (err || msg->msg_flags & MSG_CTRUNC) {
+					msg->msg_flags &= ~MSG_CTRUNC;
+					if (!err)
+						err = -ETOOSMALL;
+					goto out;
+				}
+
+				atomic_long_inc(&niov->pp_ref_count);
+				tcp_xa_pool.netmems[tcp_xa_pool.idx++] = skb_frag_netmem(frag);
+
+				sent += copy;
+
+				if (remaining_len == 0)
+					goto out;
+			}
+			start = end;
+		}
+
+		tcp_xa_pool_commit(sk, &tcp_xa_pool);
+		if (!remaining_len)
+			goto out;
+
+		/* if remaining_len is not satisfied yet, we need to go to the
+		 * next frag in the frag_list to satisfy remaining_len.
+		 */
+		skb = skb_shinfo(skb)->frag_list ?: skb->next;
+
+		offset = offset - start;

It's an offset into the current skb, isn't it? Wouldn't
offset = 0; be less confusing?

+	} while (skb);
+
+	if (remaining_len) {
+		err = -EFAULT;
+		goto out;
+	}

Having data left is not a fault, and to get here you
need to get an skb with no data left, which shouldn't
happen. Seems like everything you need is covered by
the "!sent" check below.


+
+out:
+	tcp_xa_pool_commit(sk, &tcp_xa_pool);
+	if (!sent)
+		sent = err;
+
+	return sent;
+}
+
...
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index de0c8f43448ab..57e48b75ac02a 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -79,6 +79,7 @@
  #include <linux/seq_file.h>
  #include <linux/inetdevice.h>
  #include <linux/btf_ids.h>
+#include <linux/skbuff_ref.h>
#include <crypto/hash.h>
  #include <linux/scatterlist.h>
@@ -2503,6 +2504,15 @@ static void tcp_md5sig_info_free_rcu(struct rcu_head *head)
  void tcp_v4_destroy_sock(struct sock *sk)
  {
  	struct tcp_sock *tp = tcp_sk(sk);
+	__maybe_unused unsigned long index;
+	__maybe_unused void *netmem;

How about adding a function to get rid of __maybe_unused?.

static void sock_release_devmem_frags() {
#ifdef PP
	unsigned index;
	...
#endif PP
}

Also, even though you wire it up for TCP, since ->sk_user_frags
is in struct sock I'd expect the release to be somewhere in the
generic sock path like __sk_destruct(), and same for init.
Perhpas, it's better to leave it for later.

+
+#ifdef CONFIG_PAGE_POOL
+	xa_for_each(&sk->sk_user_frags, index, netmem)
+		WARN_ON_ONCE(!napi_pp_put_page((__force netmem_ref)netmem));
+#endif
+
+	xa_destroy(&sk->sk_user_frags);
trace_tcp_destroy_sock(sk); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index bc67f6b9efae4..5d563312efe14 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -624,6 +624,8 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
__TCP_INC_STATS(sock_net(sk), TCP_MIB_PASSIVEOPENS); + xa_init_flags(&newsk->sk_user_frags, XA_FLAGS_ALLOC1);
+
  	return newsk;
  }
  EXPORT_SYMBOL(tcp_create_openreq_child);

--
Pavel Begunkov




[Index of Archives]     [Netdev]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux